|
Public Luminaire With 50W Led, Dimmable, Luminous Efficiency Greater Than Or Equal To 100 Im/W, Color Temperature 5,000 To 6,500K, Degree Of Protection Ip66, Power Factor Greater Than 0.90, With 7-Pin Base, Operating Frequency 50-60 Hz, Bivolt, Standard Opening Angle Type Ii (Nbr 5101), Minimum Useful Life Of 50,000 H, Aluminum Body With Electrostatic Painting.(Wide Competition – 75%), Aluminum Body With Electrostatic Painting.(Quota Reserved For Me/Epp – 25%), Public Luminaire With 100W Led, Public Luminaire With 150W Led, Aluminum Body With Painting Electrostatic., Public Luminaire With 200W Led, Lighting Photoelectric Relay, Nominal Voltage 110/220 V, Nominal Current 10 A, Mounting Type Electromagnetic Switch, Technical Standards Nbr 5.123/82., Base For Lighting Photoelectric Relay, Arm For Luminaire - Hot Galvanized Iron Arm, Diameter 2, 5, Length 1.5 Meters, Curved Shoe For Public Lighting, With Nuts, Screws And Washers., Insulated Electrical Cable, Bare Copper Conductor Material, Soft Conductor Temper, Nominal Section 2.5Mm2, Insulation Voltage 0.6/1 Kv, Insulation Color Green, Additional Features Extra Flexible Hepr Insulation 90°C, Application Installations Electrical, Technical Standards Nbr 5410, Nbr 7286 And Nbr Nm 280, Conductors Quantity 1, Stringing Class 5, Insulation Voltage 750 V., Safety Belt With Double Y Lanyard - Safety Belt With 4 Anchor Points - Y Lanyard With Double Energy Absorber Lock - Protection Against Falls Over 2 Meters - Belt With Super Comfortable Lumbar Support - Lanyard With 55 Mm Lock, Safety Glove - 20Kv High Voltage Glove: Comply With Abnt Standard 10622/1989. It Must Offer Protection Against Electrical Shock; Present Resistance Of Up To 20,000 Volts. Its Expiration Date Must Be Engraved On The Outside Of The Glove. Class 2, Cowl Cover Glove For High Voltage Glove Protection. In Various Sizes With Certificate Of Approval From The Ministry Of Labor (Ca), Valid., Simple White Full Brim Helmet With Jugular V-Gard 297204 Msa, Flame-Resistant Balaclava Hood High Temperature Electric Arc, Safety Boot, Neoprene Material, Rubber Solar Material, Black Color, Custom Size, Additional Features Rubber Reinforcement On The Instep And Heel., Pliers Universal, Steel, Ergonomic Handle, With Electrical Insulation, 8 Inches., Fixed Wrench, Wrench. Set Of Fixed Wrenches Composed Of At Least: 6 X 7Mm; 8 X 9Mm; 10 X 11Mm; 12 X 13Mm; 14 X 15Mm; 16 X 17Mm; 18 X 19Mm; 20 X 22Mm; 21 X 23Mm; 24 X 27Mm; 25 X 28Mm And 30 X 32Mm. Reference Model: Bremen-6790. Minimum 12 Pieces., Professional Uniform Size (L) For Electrician, Pants, Made From Fabric With Flame Retardant Treatment, Atpv: 8, 2Cal/Cm 2(Minimum), Risk 2, Reinforced Sewing With Flame Retardant Thread. With Belt Loop, Two Pockets In The Front And Two In The Back. Reflective Flame Retardant Strips (Anti-Flame). Color: Grey. Below Is A Grid With Expected Numbering And Quantity: No. 42; No. 44; No. 46/14; No. 48/10, No. 50/08 And No. 54/04. This Grid May Undergo Changes As Required By Fpv. Measurements May Be Subject To Change Depending On The Suppliers Standards, Who Must Contact Sesmt/Fpv Before Making The Garments. Uniform As Required By Nr-10 And Nr-06. Note: The Certificate Of Approval (Ca) Must Be Engraved On The Body Of The Epi., Signaling Cone, Flexible Pvc Material, Height 75 Cm, Orange Color
|
