|
Item: Alidade (Hand Bearing Compass)Technical Specification: Alidade With Neck Hanging Lanyard, Floating, With Non-Digital Numbering, Which Allows The Navigator To Identify The Angle In Degrees In Relation To Known Points, Color Blue, Yellow Or Orange. Hand Compass To Measure Wind Direction. - Hand Bearing Compass), Item: Digital Anemometertechnical Specification: Handheld Digital Battery Wind Speed Meter With 3 To 4 Measuring Units., Item: Signal Flagtechnical Specification: Regatta Signal Flags Of The International Code Of Signals And Classes Of Minimum Size Of 70Cmx90cm, Synthetic Fabric., Item: Binocularstechnical Specification: Handheld Binoculars With Image Magnification (Zoom) Of At Least 8 Times Or More, Objective Lens Must Be At Least 15 Mm In Diameter Or More., Item: Windsock For Optimist Classtechnical Specification: Windsock Arrow For Optimist, Balanced With Precision And With High Sensitivity. Fin Arms Of Both Indicators With Low Friction And Connected To The Rod With Positive Locking System. Fitting Part On Flexible Mast, 25/11/2025 - 22:12:08, 25/11/2025 - 22:12:09, 25/11/2025 - 22:12:10, 25/11/2025 - 22:12:11, Item: Large Wrist Stopwatchtechnical Specification: Watch Wrist Stopwatch With Jumbo Screen, With Programmable Countdown And Beeps Every Minute And The Last Ten Seconds, Waterproof With Very Large Numbers And Adjustable Clamp With Special Velcro Strap., Item: 29Er Daggerboardtechnical Specification: Complete 29Er Class Competition Daggerboard, Built In The Material And Design Specified In The Boat Class Rule., Item: Daggerboard Optmistechnical Specification: Complete Optimist Class Competition Daggerboard, Item: Specific Hardware By Classtechnical Specification: Different Types Of Hardware Such As Rudder Hardware, Donkey Hardware, Boom, Mast, Stays, Crossarms, Adjustments, Travelers, Normally Built In Steel, Aluminum Or Carbon, Or A Mixture Of These Materials. The Different Boats Of The Different Classes Also Have Their Specific Hardware. See Each Class Manual. (Rudder Female, Rudder Male, Jaw, Block, Spinlock, Hook, Steel Handle, Plastic Handle, Wreath, Steel Ring, Steel Cable Pass, Steel Shackle, Steel Pin, Steel Counter-Pin, Swivel Base For Ratchet Or Block, Ratchet, Spring For Block Support, Winding, Steel Cable, Terminal For Steel Cable, Pins, Studs, Screws, Steel Plates, Among Others) Complementary Technical Specification: Complete Mast For Optimist Class. The Items That Make Up A Mast Are: Mast, Boom And Sprit, Normally Grouped For Reasons Of Hardness And Resistance, And Used According To The Weight Of The Crew Member. Complete Mast For Optimist Class Boat, Approved By The International Class, Consisting Of 3 Parts: Mast, Boom And Sprit. Mast: Made Of High Hardness 7075 Dark Anodized Aluminum, With Protection Ring At Enora Height, Includes 2 Anodized Clam Cleats (Cable Lock) With Pulleys And Cable To Reduce The Spike; Outrigger: Made From High Hardness Dark Anodized 7075 Aluminum, Includes 1 Clam Cleats (Cable Lock); 3 Mm Cable Strap, And Nylon Hose; Spike: Made Of High Hardness Dark Anodized Aluminum, With Two Nylon Tips. Torpedo Windsock Type Wind Indicators, Mast Top, Sail Cables., Item: Laser Distance Metertechnical Specification: Laser Distance Meter
|
