Tender For Material Supply For Construction Of Anganvadi No 66, Ward 3, Kurichithanam in India

Work Detail

Tender For Material Supply For Construction Of Anganvadi No 66, Ward 3, Kurichithanam-- 1 Stone Aggregate(single size): 40 mm nominal size 2 Stone Aggregate(single size):20 mm nominal size 3 Coarse sand (zone III) 4 Portland Cement 5 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper 6 Vibrator (Needle type 40 mm) 7 Stone Aggregate(single size): 10 mm nominal size 8 Gravelly soil (including conveyance) 9 Solid blocks of size 30x20x20cm 10 Solid blocks of size 30x20x15cm 11 Structural steel such as tees, angles, channels and R.S. joists 12 Red oxide Zinc chromate primer 13 Adjustable span ESO+SI (2.35-3.40) 14 Adjustable telescopic prop 3 m (2.02-3.75m) 15 Beam clamp 300-380 mm (450-1070 mm) 16 Twisted steel/deformed bars 17 Fine sand (zone IV) 18 Vitrified floor tile 60x60 cm 19 Anjili wood scantls 20 Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 21 Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm 22 Bright finished or black enameled mild steel screws 40 mm 23 Bright finished or black enameled mild steel screws 20 mm 24 Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre 25 48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish 26 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish 27 Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles 28 Oxidised mild steel tower bolt (barrel type) 200x10 mm 29 Oxidised mild steel screws 30 mm 30 Oxidised mild steel handles 125 mm 31 Oxidised mild steel screws 25 mm 32 Synthetic enamel paint in black or chocolate shade 33 sundries 34 Wall form panel 1250x450xmm 35 Corner angle 45x45x5 mm 2.50 long 36 Column clamp 450x1070 mm 37 Prop 2 m (2-3.5m) 38 Rawl plug 50 mm (designation 10 nos) 39 Brass 100 mm mortice latch and lock with 6 levers without pair of handles 40 Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock 41 Mild Steel round bar above 12 mm dia 42 Flats up to 10 mm in thickness 43 Anjili wood planks 44 Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Contact Information