Quotation are invited for Bluetooth Speaker and Microphone Delivery Date: 2025/08/15 Delivery To: Support Services SUSE Delivery Address: 12 Hertzog Blvd, Cape Town Closing Date: 2025/07/23 Closing Time: 12:00 PM Description: 1 each x bluetooth speaker and microphone Specification: * REFER TO GK12600013 Battery powered bluetooth speaker and microphones *Based from JBL 520 with wireless JBL microphone set General Specifications Power input: 100 - 240 V ~ 50 / 60 Hz Output power: 400 W RMS (IEC60268) Audio Specifications Transducer : 2 x 7.5 inch (208 mm) woofers, 2 x 1 inch (25 mm) dome tweeters Frequency response: 40 Hz - 20 kHz Signal-to-noise ratio: > 80dB Control and Connection Specifications Input sensitivity: Aux-In: 250 mV RMS (3.5 mm connector) Mic-In: 20 mV RMS Guitar-In / Line-In: 100 mV RMS Bluetooth/USB input: -12 dBFS Bluetooth version: 5.4 Bluetooth profile: A2DP V1.4, AVRCP V1.6 Bluetooth transmitter frequency range: 2.4 GHz - 2.4835 GHz Bluetooth transmitter power: 18 dBm (EIRP) Bluetooth transmitter modulation: GFSK, /4 DQPSK, 8DPSK USB format: FAT16, FAT32 Supported formats: .MP3, .WAV, .WMA, .FLAC (not available for EMEA region) USB-C charge out: PDO (5 V / 3 A, 9 V / 3 A, 15 V / 2 A, 20 V / 1.5 A), PPS (5 - 11 V / 2.7 A, 5 - 16 V / 1.85 A) Cable type: AC power cable (type varies by regions) Cable length: 2.0m/6.6ft Battery Specifications Battery type: JBL BATTERY 600, Li-ion 99.02 Wh (equivalent to 21.6 V / 4584 mAh) Battery charge time: 3 hours (speaker off mode) Music play time: up to 15 hours (varies by volume level and audio content Speaker compatible with wireless pairing to JBL 320 Make your good times even better with JBL PartyBox Wireless Mics. Just plug them into any JBL PartyBox, or use the dongle for the freedom of a wireless connection, and let your voice be heard. Indoors or outside, youll sound clear and captivating on these mics specially tailored to sound amazing over any PartyBox speaker. A built-in foam pop filter minimizes any extraneous vocal sounds General Specifications Carrier Frequency 2404 - 2478MHz Encryption AES - 128 Working Range 30m (100ft) Latency 12ms Frequency / Channel selection Adaptive channel selection Frequency Response 50Hz - 15KHz Dynamic Range 100dBA @ 1KHz Signal -to -Noise 59dBA THD 1% @ 94dB SPL, 200 - 10KHz Transimitting power 10dBm Receiver maximum output level 1V RMS Dimensions Microphone Head 16mm ECM Microphone Dimensions (W x H x D) 45.5 x 224.5 x 42.5mm / 1.79 x 8.84 x 1.67 Microphone Weight 270 g / 0.6 lb Dongle Dimension (W x H x D) 42 x 96.5 x 18mm / 1.65 x 3.8 x 0.71 Dongle Weight 43 g /0.095 lb Gift Box Dimension (W x H x D) 131 x 72 x 236mm / 5.16 x 2.83 x 9.29 Gift Box Weight 854 g / 1.88 lb Battery Microphone Rechargeable Battery 600mAh, 3.7V Li-ion battery Dongle Battery 700mAh 3.7V Li-ion battery Playtime of Microphone up to 20 hours Playtime of Dongle up to 12 hours Microphone battery charge time 2.5H in off mode Dongle battery charge time 2.5H in off mode IMPORTANT: QUOTATION CONDITIONS: The quotation condition listed below are in addition to those contained in the CCT standard quotation conditions and must be fully complied with: Clause 3: General Obligations 3.6.1.1 For this quotation, purchase orders / works packages will be determined and created as follows: 3.6.1.1.1 Based on the total amount as reflected on the Price Schedule and to the supplier as awarded by the SCM delegated authority. GUIDELINE: Wherever reference is made to any Trademark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the supplier#s commercial position (including joint venture agreements), preferencing arrangements, or samples of materials considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned will be declared non-responsive. The Municipal Bidding Document 6.1 is attached, to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with every RFQ submission, failure to submit will result in zero-point allocation. Please note that the MBD6.1 document is valid a year from date of signature. Failure to comply with the above will result in a zero (0) allocation for preference points. INSURANCE DOCUMENTS: Ensure that all required insurances such as your Public liability, Employers liability or COIDA and motor vehicle insurance are attached and that they are up to date. Events Department Location: 10th Floor Civic Centre, 2 bay COntact person: Ruan JvR Contact number: 0214440254 084441025 Tender Link : http://web1.capetown.gov.za/web1/ProcurementPortal/RFQ/Details/307114
|