|
Tender For Repair/ Replacement Of Certain Unserviceable Parts , Painting & Polishing Of Wooden & Steel Furniture Under Ge E/M Rr Hosp. Delhi Cantt-10.; 1 STEEL FURNITUREREPAIR TO ALMIRAH MED STEEL(FD-1032/87M) :-Removing of old unsv,broken and rusty components from Almirah med steel and S & F new component made out of 1mm thick PBI Sheet made to shape and size as per existing and as per drg duly two coat synthetic enamelpaint over a coat of red oxide primer, or other part completeall as specied and as directed by Engr-In-Charge/GE.:- 2 Leg 3 Shelves . 4 Dismantling of unserviceablebushes of lockingassembly and S & F new Brass bushes of locking assemblyas directed by Engr-in Charge. 5 Dismantling of unserviceablethree way locking asembly with complete mechanism and S & F new three way locking assemly with base plate (Complete mechanism) with upper and lower bars as shown in drg or as directed by Engr-in Charge. 6 Dismantling of unserviceablelock S & F new lock four lever with two or three keys as shown in drg or as directed by Engr-in Charge 7 S & F Handle CP for Almirah as shown in drg or as directed by Engr-in Charge after removal of old unserviceable hanle. 8 Cover of Locking assembly. 9 Bottom. 10 S & F MS cleats made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves complete all as specified and directed by Engr-in-Charge. 11 M&L for dismantling of existing unserviceable MS Butt Hinges & S & F new S S Butt Hinges with suitablescrews as per specification and as per drg. 75 mm long best quality of approved pattern complete all as specified and directed by Engr-in-charge. 12 Dismantling of unserviceable keyhole cover.S & F of new key hole cover stainless steel with sutable screw as per specification and as per drg. 13 REPAIR TO ALMIRAH LARGE STEEL WITH SHELVES(FD-1031) :- Removing of old unsv,broken and rusty components from Almirah Largesteel and S & F new compnent made out of 1mm thick PBI Sheet made to shape and size as per existing and as per drg duly two coat o synthetic enamelpaint over a coat of red oxide primer, or other part completeall as specied and as directed by Engr-In-Charge/GE.:- 14 Leg 15 Shelves 16 Dismantling of unserviceablebushes of lockingassembly and S & F new Brass bushes of locking assemblyas directed by Engr-in Charge. 17 Dismantling of unserviceablethree way locking asembly with complete mechanism and S & F new three way locking assemly with base plate (Complete mechanism) with upper and lower bars as shown in drg or as directed by Engr-in Charge. 18 Dismantling of unserviceablelock S & F new lock four lever with two or three keys as shown in drg or as directed by Engr-in Charge 19 S & F Handle CP for Almirah as shown in drg or as directed by Engr-in Charge after removal of old unserviceable hanle. 20 Cover of Locking assembly. 21 Bottom 22 M&L for dismantling of existing unserviceable MS Butt Hinges and S & F new S S Butt Hinges with suitablescrews as per specification and as per drg. 75 mm long best quality of approved pattern complete all as specified and directed by Engr-in-charge. 23 Dismantling of unserviceable keyhole cover.S & F of new key hole cover stainless steel with sutable screw as per specification and as per drg. 24 REPAIR TO ALMIRAH LARGE STEE 12H /1/2S (FD/E6/MSAP/18,FD-1033 :- Removing of old unsv,broken and rusty components from Almirah Largesteel and S & F new component made out of 1mm thick PBI Sheet made to shape and size as per existing and as per drg duly two coat o synthetic enamelpaint over a coat of red oxide primer, or other part completeall as specied and as directed by Engr-In-Charge/GE.:- 25 S & F stainless Steel hanging rod of size 25 mm, 1 mm thick to Almirah Steel of approved quality as specified and shown in drg. 26 Leg 27 Shelves 28 Dismantling of unserviceablebushes of lockingassembly and S & F new Brass bushes of locking assemblyas directed by Engr-in Charge. 29 Dismantling of unserviceablethree way locking asembly with complete mechanism and S & F new three way locking assemly with base plate (Complete mechanism) with upper and lower bars as shown in drg or as directed by Engr-in Charge. 30 Removal of unserviceablelock.S & F new lock four lever with two or three keys as shown in drg or as directed by Engr-in Charge 31 S & F Handle CP for Almirah as shown in drg or as directed by Engr-in Charge after removal of old unserviceable hanle. 32 Cover of Locking assembly. 33 Bottom 34 S & F MS cleats made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves complete all as specified and directed by Engr-in-Charge. 35 Removal of existing unserviceable MS Butt Hinges.S & F new S S Butt Hinges with suitablescrews as per specification and as per drg. 75 mm long best quality of approved pattern complete all as specified and directed by Engr-in-charge. 36 Removal of unserviceable key hole cover.S & F of new key hole cover stainless steel with sutable screw as per specification and as per drg. 37 BED HARD (MAP) (FD/E6/MAP/08(R) :-Removal of old unsv 12 mm thick ply wood from top of bed.S & F new 12 mm thick (7 Ply) commercial plywood BWR grade, to be fixed with appropriate sizes of MS nuts, boltsand washers without having any joints completeall as specified and directed by Engr-in-Charge. 38 Removing of unserviceable 18 mm particale board from head board and S&F new 18 mm thick exteior grade HDHMR (High Density high resistance moist fibreboard) board both side laminated of approved shade with 4mm thick seasoned teakwood beading all roundwith suitablescrews with the cleats completeall as specified and directed by Engr-in-Charge. 39 Removing of unserviceable 18 mm thck pre laminated partical board from foot board and S&F new 18 mm thick exteior gradeHDHMR (High Density high resistance moist fibreboard)boardboth side lminated of approved shade with 4mm thick seasoned teakwood beading all roundwith suitablescrews with the cleats completeall as specified and directed by Engr-in-Charge. 40 S&F new PVC hard Rubber Shoes as per drg and as directed by the Engr-in-Charge. 41 Removal of old unsv and rusty long rail (25x65mm rectangle pipe) from Bed Hard (Map) and S&F new long rail (25x65mm rectangle pipe 18 gage)Shape and Size as per existing/ as per drwg duly painted and as directed by the Engr-in-Charge. 42 Removal of unserviceable head board (complete set) from Bed Hard (Map)S&F new head board (complete set) shape and size as per drwg.all as specified and directed by Engr-in-Charge. 43 Removal of unserviceable foot board (complete Set) from Bed Hard (Map)S&F new foot board (complete set) shape and size as per drwg.all as specified and directed by Engr-in-Charge. 44 Removal of old unsv/rusty stiffner from bed and S&F new stiffner 25x25mm,18 gauge shape & size as pe drwg duly painted as directed by Engr-in-Charge. 45 REPAIR TO CHARPOY GI PIPE WITH PLY TOP(FD-220/1122):-S&F 12 mm thick plywood commercial type BWR grade size 1950mmx900mmx12mm thick (in one piece only) as top of the charpoy GI Pipe with mild steel screw bolt (Machine made) of size 75 mm long, 6 mm thick with hexagonal or square head at one end and screw the other with washer , including removal of old unserviceable ply top.completeall as specified and directed by Engr-in-Charge. 46 Removal of existing unserviceable/broken long rail and S&F new long rail of GI pipe medium grade 32 mm size bore duly ISI marked including threading at both ends completeall as specified and directed by Engr-in-Charge. 47 S&F for dismantling of existing unserviceable/broken short rail and cutting of old long rail obtained from Sr No 19 to the required size for short rail including threading at both ends completeall as specified and directed by Engr-in-Charge. 48 Removing of Old u/s legs of Charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 20 aboveby cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed by Engr - in - Charge. 49 Supply and fixing MS flat iron of size 40mmx5mm thick , 900 mm long providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with longrail with countersunk screws/suitable nuts, bolts and washers on both sides of flat MS iron and including preparation of surface and applyingtwo coats of synthetic enamel paint over a coat of red oxide/primer, completeall as specified and directed by Engr-in-Charge. 50 Supply and fixing MS flat iron of size 40mmx5mm thick , 150 mm long between long rail and short rail on each corner, providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with longrail with countersunk screws/suitable nuts, bolts and washers on both sides of flat MS iron and including preparation of surface and applyingtwo coats of synthetic enamel paint over a coat of red oxide/primer, completeall as specified and directed by Engr-in-Charge. 51 M&L for dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitablefor GI Pipe med grade 32 mm bore pipecompleteall as specified and directed by Engr-in-Charge. 52 S&F in replacement of unserviceable check nut6 mm thick suitable for 32 mm bore GI pipe charpoy of approved make completeall as specified and directed by Engr-in-Charge. 53 CHARPOY WITH HARD TOP (FD/MAP-II/01) :-Removal of old unsv 12 mm thick ply wood from top of Charpoy.S & F new 12 mm thick (7 Ply) commercial plywood BWR grade to be fixed with appropriate sizes of MS nuts, bolts, 25 x 60 x 6 mm MS Cleat welded with frame to support plyand washers without having any joints completeall as specified and directed by Engr-in-Charge. 54 Removal of old unsv and rusty long rail (25 x 65 x 16 mm tube frame) from Charpoy (MAP) and S&F new long rail (25 x 65 x 16 mm M S Tube frame)Shape and Size as per existing/ as per drwg duly painted and as directed by the Engr-in-Charge. 55 Removal of old unsv/rusty MS tube legs from charpoy and S&F newMS Tube legs 32 x 32 mm,16 gauge shape & size as pe drwg duly painted as directed by Engr-in-Charge. 56 Removal of old unsv/rusty stiffner from charpoy and S&F new stiffner MS Tube 25 x 25 mm,16 gauge shape & size as pe drwg duly painted as directed by Engr-in-Charge. 57 S&F new PVC hard Rubber Shoes as per drg and as directed by the Engr-in-Charge. 58 REPAIR TO LOCKER BED SIDE STEEL FD-1029/563/(71) :-Removing of old unsv,broken and rusty components from Locker Bed Side Steel and S & F new components made out of 1mm thick PBI Sheet made to shape and size as per existing and as per drg duly two coat o synthetic enamelpaint over a coat of red oxide primer, completeall as specied and as directed by Engr-In-Charge/GE.:- S&F new handles CP steel 75mm long with suitable MS screws of approved quality 59 M&L for dismantling of existing unserviceable new handles CP steel 75mm long with suitable MS screws of approved quality directed by Engr-in-Charge. 60 M&L for dismantling of existing unserviceable Hasp and Stapple and S&F newHasp & staple of size 75x40x3mm thick stainless steel with suitable boltand nuts completeall as specified and directed by Engr-in-Charge. 61 Legs 62 Shelves 63 Removal of existing unserviceable Hinges. S & F new Hinges with suitablescrews/welding as per specification and as per drg. all as specified and directed by Engr-in-charge. 64 S & F stainless Steel hanging rod of size 20 mm, 1 mm thick to Almirah Steel of approved quality as specified and shown in drg. 65 Removal of unsv bracket for hanging rod and S & F New bracket for hanging rod shape and size as per drg and directed bu Engineer incharge. 66 BED STEAD FOWLERTYPE-I WITH MATTRESS(HFD-2002) :-M&L for removal of unserviceable castors, S&F new castor 100mm dia fix type, as per Drg. 67 All as per Srl item Noabove, but castors 100mm dia with bracket as per Drg. 68 M&L for removal of unserviceable parts of crank Mechanism with Handle and Nuts/Bolts, S&F new crank Mechanism with Handle wound lever operated backrest at foot end.Handle to fold inwards when not in use.Head raise range 0-80 and knee raise Range 0-45 Degree.Trendeleberg and RT upto + 15 Deg Height 620-825mm, fix in position.All as per Drg/Direction of Engr-in-charge. 69 Removing of all old/unsv mattress and S & F new Mattress of size 6 to 6.5ft x03 ft x5 inches of superior Quality. Preferable(Sleepwell/Kurlon/Dunlop) with ISI Mark. The IFD (Indentation Forcec Deflection)/ILD(Indentation Load Deflection) rating structure of Mattress conforming 50 density. 70 Removing of all old/unsv and S & f new Pre laminated MDF board 18 mm thickness of Head & Foot boards 230X30.all as specified and shown on drawing and directed by GE/Engr-in-charge. 71 CHAIR REVOLVINING HIGH BACK:-Removing of old unsv Tapestry Cloth , Foam Cusion Ply wood,PVC seat cover and PVC lipping from chair Seat and S&F New Tapestry cloth , Foam Cusion 50mm thick and 50 density, ,12mm thick ply wood commercial grade, PVC cover of seat and new PVC Lipping all around it complete all as per dgr and directed by Engineer-in-Charge. (Note- Rate of fabric is not less than RS250/- per mtr) 72 Removing of old unsv Tapestry Cloth , Foam Cusion Ply wood,PVC back cover and PVC lipping from chair Seat and S&F New Tapestry cloth , Foam Cusion 50mm thick and 50 density, ,12mm thick ply wood commercial grade, PVC cover of back seat and new PVC Lipping all around it complete all as per dgr and directed by Engineer-in-Charge. (Note- Rate of fabric is not less than RS250/- per mtr) 73 Removing of old unsv Hydraulic System and S&F New Hydraulic System superior quality complete all as per drg and directed by Engr-in-charge 74 Removing of old unsv Handle and S&F New Black PU Handle complete all as per drg and directed by Engineer-in-Charge 75 Removing of old unsv Caster Wheel and S&F New Caster Wheel made of superior Quality complete all as per drg and directed by Engr-in-charge 76 Removing of old unsv Pedestral Assembly complete with caster wheel and S&F New Metalic Pedestral Assembly complete with castor wheel complete all as per drg and directed by Engr-in-Charge 77 CHAIR WRITING (MAP)- (FD/E6/MAP/12) :-Removing of old unsv 12mm thick plywood upholstered with fabric and moulded polythene foamwith PVC lipping all round from seat and PVC seat coverand S&F new 12mm thick plywood upholstered with fabric and moulded polythene foam 50mm thick,50 density with PVC lipping all round and PVC seat cover. (Note Fabric cloth not less than Rs 250/- per meter) Shape and size as per drg. 78 Removing of old unsv 12mm thick plywood upholstered with fabric and moulded polythene foamwith PVC lipping all round fromback and PVC back cover and S&F new 12mm thick plywood upholstered with fabric and moulded polythene foam 50mm thick,50 density with PVC lipping all round and PVC back cover. (Note Fabric cloth not less than Rs 250/- per meter) Shape and size as per drg. 79 Removing of old unsv Handle and S&F New Black PU Handle complete all as per drg and directed by Engineer-in-Charge 80 Removing of old unsv Shoes and S&F New PVC/Rubber Shoe complete all as per drg and Directed by Engr-in-Charge 81 TABLE BED SIDE MAP Drg No FD/E6/MAP/15(R) :- Removing of old unsv the existing broken or unserviceable components of table bed side MAP,S&F new components of Table Bed Side MAP,HDHMR (High Density high resistance moist fibreboard)board both side laminated approved shadeduly post-formed(PFT)with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. 82 Top 83 Side 84 Back Ply 6mm 85 Drawer Handle 86 Drawer with telescopic channel as per drg. 87 Pull out tray with telescopic chaneel as per drg. 88 Front leg 18mm square MS Pipe, 18 gauge. 89 Back frame 18mm square MS Pipe, 18 gauge. 90 PVC Shoes at bottom of Legs 91 CHAIR VARAMDAH (FD-19(M)/359/256) :-Recaning the Chair Varamdah with 4mm to 4.5 mm wide half round plastic cane white/cream colour in matt pattern all as specified and shown on drawing and as directed by Engr-in-Charge 92 M&L for denting and painting of following items ofsteel furniture with two coats of synthetic enamel paint with spraying machine (inner and outer surface i.e almirah, lokcer, table office steel and table bed side steel)( Hammertone paint and colour as approved by (GE/Engr-in-Charge) after removing of old paint with grinder machine and preparation the surface smooth with filling the putty, scraping with abrasive emery paper all as specified and shown on drawing and directed by GE/Engr-in-Charge:- 93 Almirah Large Steel With Shelves (Different colour shutter, sides and back as directed by Engr -in-Chage) 94 Almiraha Large Steel 1/2 H x 1/2 Shelves(Different colour shutter, sides and back as directed by Engr-in-charge) 95 Almirah Medium with shelves(Different colour shutter, sides and back as directed by Engr-in-charge) 96 Bed Hard (MAP) 97 Charpoy with hard top (MAP) 98 Chair Varandah 99 Locker Bed Side Steel(Different colour shutter, sides and back as directed by Engr-in-charge) 100 Screen Movable 3 Fold 101 Table Bed Side Steel Hospital 102 Bed Flower Type I & II 103 WOODEN FURNITUREREPAIR TO BED HARD WITH PLY TOP ( FD-246/247) :-Removal of old unsv Ply from Bed Hard and S&F new Ply 12mm thick (7Ply) commerical BWR gradeMake of ply Kit Ply/Green ply/Century shape and size, as per drgand directed by Engr-in-charge. 104 S&F in replacement of unserviceable long rail shall be First class class hardwood well seasonedteak wood free from cracks and dead knots, shape and size, all as specified on drg or as directed by Engr-in-Charge. 105 S&F in replacement of unserviceable short rail shall be First class class hardwood well seasonedteak wood free from cracks and dead knots, shape and size, all as specified on drg and as directed by Engr-in-Charge. 106 Removal of old unsv head board and S&F new head board restouter ply to be replaced by 3 mm thick ply wood one side teak facedand inner side commercial plywood BWR grade general purpose type confirming to IS 303-1989 and ISI markedincluding teak wood beading all around and 1/2 cut 12 mmdia beading made to shape as shown on drg and asdirected byEngr-In-Cahrge. 107 Dismantling of unserviceable Foot board of Bed ply top, S&F new foot rest complete (well finished with polishing) of bed ply top along with MS angle strip of size 4"x4"x6mm, suitable type of MS secres and as perdrg and as directed by Engr-in-Charge 108 S&F of first class hard wood (teak) corner 100mmx100x25mm bracket be fixed with suitable MS screws to the bed as directed by the Engr-in-Charge. 109 Removal of old unsv stiffner from Bed Hard and S&F new stiffenr of 2nd class hard wood shape and size as per drwg. 110 BIN LIENUN MULTI PURPOSE (FD/E6/MAP/09) :-Removing of old unsv handle of Door and Drawer and S&F New Handle Complete all as per drawing and directed by Engr-in-Charge 111 Removing of old unsv Magnetic clatcher and S&F New Megnetic clatcher complete all as per drawing and directed by Engr-in-charge 112 Removing of all unsv Door of Bin Lienun and S&F New Door made of 18mm thick HDHMR (High Density high resistance moist fibreboard)board both side laminated approved shadeduly post-formed(PFT)with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. 113 Removing of old unsv Drawer and S&F New Drawer complete all as per drawing and directed by Engr-in-Charge 114 Removal of old unsv top from Bin lienen multi purpose and S&F new top made out of 18mm thick HDHMR (High Density high resistance moist fibreboard)board both side laminated approved shade duly post-formed(PFT)with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. 115 Removal of old unsv sides from Bin lienen multi purpose and S&F new sides made out of 18 mm thickHDHMR (High Density high resistance moist fibreboard)board both side laminated approved shade duly post-formed(PFT)with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. 116 Removal of old unsv Shelf from Bin lienen multi purpose and S&F new shelf made out of 18mm thickHDHMR (High Density high resistance moist fibreboard)board both side laminated approved shade duly post-formed(PFT)with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. 117 Removal of old unsv Back ply from Bin lienen multi purpose and S&F new Back ply of 12mm thick commerical BWR grade,shape and size as per per drwg. 118 Removal of old unsv leg of Bin lienen Multipurpose and S&F new leg made of out first class hard wood teak , shape and size as per drwg. 119 CHAIR DINING OFFICER Drg No FD/MAP-II/04 :-M&L for removing the following existing broken or unserviceable components of wooden furniture items from Chair Dining Offr and S&F New 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge: 120 Front Leg 121 Rear leg 122 Side Rail 123 Back Rail 124 Front Rail 125 Upper stiffner of back 126 Corner set of 8 127 Curved stinffner back 128 PU Foam of seat of 75mm Thick density40duly covered with superior quality Tepastry Cloth (rate not less then 250/- per meter) shape and size as per drwg. 129 12mm thick plywood commerical BWR grade and 4 nos of corners for seat fixed with suitable screw, shape and size as per drwg. 130 PVC Shoes at bottom of Legs 131 CHAIR COMPUTER (MAP)- (FD/E6/MAP/01) :-Removing of old unsv Tapestry Cloth , Foam Cusion Ply wood,PVC seat cover and PVC lipping from chair Seat and S&F New Tapestry cloth , Foam Cusion 50mm thick and 50 density, ,12mm thick ply wood commercial grade, PVC cover of seat and new PVC Lipping all around it complete all as per dgr and directed by Engineer-in-Charge. (Note- Rate of fabric is not less than RS250/- per mtr) 132 Removing of old unsv Tapery Cloth , Foam Cusion Ply wood,PVC back cover and PVC lipping from chair Seat and S&F New Tapestry cloth , Foam Cusion 50mm thick and 50 density, ,12mm thick ply wood commercial grade, PVC cover of back seat and new PVC Lipping all around it complete all as per dgr and directed by Engineer-in-Charge. (Note- Rate of fabric is not less than RS250/- per mtr) 133 Removing of old unsv Hydraulic System and S&F New Hydraulic System superior quality complete all as per drg and directed by Engr-in-charge 134 Removing of old unsv Handle and S&F New Black PU Handle complete all as per drg and directed by Engineer-in-Charge 135 Removing of old unsv Caster Wheel and S&F New Caster Wheel made of superior Quality complete all as per drg and directed by Engr-in-charge 136 Removing of old unsv Pedestral Assembly complete with caster wheel and S&F New Metalic Pedestral Assembly complete with castor wheel complete all as per drg and directed by Engr-in-Charge 137 TABLE COMPUTER Drg No FD/E6/MAP/03 :-Removing of old unsv table top of Table Computer and S&F new top of Table Computer made of 18/19mm thick HDHMR (High Density high resistance moist fibreboard)board both side laminated approved shade duly post-formed(PFT)with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. 138 Removing of old unsv Key Board all around PVC biddding with telescopic Channel and S&F new Key Board made out of 18mm thick HDHMR (High Density high resistance moist fibreboard)board both side laminated approved shade duly post-formed(PFT)with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. 139 Removing of old unsv Knob and S&F new Knob complete all as per Drawing and Directed by Engr-in-Charge 140 Removing of old unsv leg frame with leg and Nylon Buffer and S&F new leg frame made out of 25x50mm rectangle MS pipe with leg andNylon Buffer complete all as per Drawing and Directed by Engr-in-Carge 141 Removing of old unsv drawer complete and S&F new drawer complete with telescopic channel shape and size as per drg. 142 Removing of old unsv and rusty side frame and S&F new Side Frame made out of 25mm square MS pipe,18 gauge shape and size as per drg. 143 Removing of old unsv partical board from side frame and S&F new 18mm thick HDHMR (High Density high resistance moist fibreboard)board both side laminated approved shade duly post-formed(PFT)with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. 144 Removing of old unsv mouse tray and S&F new mouse tray with telescopic channel shape and size as per drg. 145 Removing of old unsv lower frame 25mm square MS pipe and S&F new lower frame made out of 25mm square MS pipe shape and size as per drg. 146 Removing of old unsv bottom shelf and S&F new bottom shelf made out of 18mm thick HDHMR (High Density high resistance moist fibreboard)board both side laminated approved shade duly post-formed(PFT)with PVC beading of 2mm on both sides with Suitable Adhesive complete all as specified on drg and as directed by Engr-in-Charge. 147 Removing of old unsv top frame from table computer and S&F new frame made out of 25mm MS square pipe 18 gauge shape and size as per drg. 148 SOFASET 5 SEATER (3 Pcs) Drg No FD 373/281 :-M&L for removing the following existing broken or unserviceable components of wooden furniture items from Table dining 6/8 person and S&F New components made out of 1st class hard wood (Teak Wood) made to shape and size as per drwg duly polished all as specified and as directed by Engineer-in-Charge 149 Front Leg 150 Side Rail 151 Arms Rest 152 Front Rail of 3 Seater 153 Rear Rail of 3 Seater 154 Upper Rail of 3 Seater (Back seat) 155 Batten 156 Front Rail of Single Seater 157 Rear Rail of Single Seater 158 Upper Rail of Single Seater (Back seat) 159 Bottom sitfnner (Seat) 3 Seater 160 Back stiffner (Back) 3 Seater 161 Bottom sitfnner (Seat) Singl Seater 162 Back stiffner (Back)Single Seater 163 PVC Shoes at bottom of Legs 164 Removal of old unsv foam cushion from Sofa Set 5 Seater and S&F new Foam Cusion 21" x 22" x 4" thick, 40 density duly covered with tapestry cloth of approved quality/shade. The Cost of tapestry cloth shall not be less than Rs 250/- per meter. All as specified and shown on drawing and as directed by Engr-in-Charge. (Note:-is one quanitity) 165 RECANING OF ALL TYPES OF CHAIR (CHAIR EASY, CHAIR DINING, CHAIR WRITING, STOOL DRESSING ) :-Taking out existing worn out/unserviceable cane from Chair Easy, Chair Dining ,Chair Writing & Stool Dressing and recaning the same with half round 2.002/2.5mm wide 0.4mm thik white plastic cane as per Godrej pattern all as specified and shown on drawing and as directed by Engr-in-Charge 166 M & L for polishing thewooden furniture with two coat of laccure polish after removing the old polish with grinder machine,preparation the surface smooth with applying putty filling cracks & joint with putty, raw shina (pilli mitti) scraping the surface with abrasive emery paper.colour of polishas directed by Engineer-in-Charge rest all as per drg (including polishing at site) 167 Chair Dining CB 168 Chair Dining Offrs (MAP) 169 Chair Easy CB 170 Sofa 5 Seater Complete 171 Sofa single seater 172 Note :The work is to be executed at BSO furniture yard, AHRR Hospital, Various units location and sites under the AOR of GE E/M RR Hospital, Delhi Cantt-110010.
|
