|
Repairing/Renovation Of Jaleswari Inspection Bunglow Under Bankura Sadar Sub-Division,Of Bankura Division,Phe Dte. Under Bankura Sadar Sub - Division Of Bankura Division, Phe Dte. -- 1 Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. b)For 1 st & 2nd floor :- 2 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading intotruck and cleaning the site in all respect as per direction of Engineer in charge 3 Earth work in filling in compound, tank, low land,ditches etc. with good earth, in layers not exceeding150 mm. including breaking clods and consolidatingthe same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work) 4 (ii) With carried earth arranged by the contractorwithin a radius exceeding 3 km. but not exceeding 5km. including the cost of carried earth. 5 Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed. 6 Clearing compound premises of shurbs , plants jungles etc. by cutting and removing as directed (Specific permission of E.I.C. prior to excution will be necessary) 7 Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing, spreading or stacking the spoils with in a lead of 75 m. as directed.The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the botttom, bailing out water as required complete. 8 (a) Depth of excavation not exceeding 1,500 mm. 9 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) 10 (a) With earth obtained from excavation of foundation. 11 (A) Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 12 b) do by fine sand. 13 Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. 14 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 15 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. 16 Pakur Variety 17 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.PWD Schedule Item 10 (i) Page26 18 Pakur Variety 19 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. 20 A) For works in foundation and upto roof of ground floor/upto 4 m SAIL / TATA / RINL 21 Brick work with 1st class bricks in cement mortar (1:6) 22 (a) In foundation and plinth 23 (b) In superstructure, For 2nd floorFor 2nd flooe :- 24 125 mm. thick brick work with 1st class bricks in cementmortar (1:4) For 2nd floor.(Rs 625.00+2x12=Rs649.00) 25 Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finishcomplete including the cost of materials, labour and all other incidental charges complete true to the manufacturersspecification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor. 26 (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. 27 (A) Deep Colour & White 28 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m] 29 Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohrs hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make asdirected and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturers specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). 30 b) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength > 1500 NNote: Add extra for each addl, floor over the rate above Ground Floor(I) upto 4 th floor- Rs. 12/-per Sq.mfor 1st floor =(1589+12)=1601 31 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With Polymerised Adhesive and Epoxy grout pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface) 32 Floor (b) Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick](i) Coloured decorative 33 (D) Wall With Poloylmerised Adhesive andEpoxy groutpointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface). Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick]2. Add extra for each addl, floor over the rate for item 35 & 36 of subhead A. (i) upto 4 th floor-Rs 5/ Sq.m (1147+5)=1152 34 (i) Coloured decorative 35 Supplying, fitting & fixing granite tiles 10mm to 12mm. thick in columns, wall, facia etc. with 15 thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. [Using cement slurry at back side of tiles@ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] 36 Area of each slab upto 0.2 Sq.m 37 supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete. In ground floor 38 Area of each Granite slab above 1.00 Square meter. 39 Polishing only of old marble or terrazo work with oxalic acid powder using 33 gms/ sq.m. by manual labour / machine where necessary. 40 M.S. structural works with hollow sections ( square or rectangular shape) conforming to IS: 806-1957 & IS:1161-1958) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, abrication including metal arc welding conforming to IS: 816-1956 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 1957, haulage,hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. 41 For 2nd floor (Rs. 72316.00 + Rs. 1084.74) = Rs.73400.74 42 a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. 43 for 2ndfloori.e :- ( Rs.9888.00 + Rs. 98.88 x 2 )=Rs.10085.76 44 Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). 45 Aluminium sheet ridging fitted with self tapping screws, EPDM washers etc complete .(Minimum 225mm end lapping).(A) 300 mm lapping each way 46 Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials 47 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868- 1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing ofluminium 2- track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white. 48 For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.[Note : for estimate purpose construction wing may consider weight of 2- track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M] 49 Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge. ( Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and locking arrangment etc) 10-12 Micron thickness Annodizing film Natural white(unit wt of to Top & side frame @1.366 kg/m ; top rail @ 1.296 kg/m; bottom rail @ 1.974 kg/m; lock rail @ 1.590 kg/m; door vertical @ 1.412 kg/m; glazing clip @ 0.167 kg/m. ) 50 Note : for estimate purpose construction wing may consider weight of Aluminium door @ 9.0 Kg per Sq.M] 51 Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 52 coloured, toughened glass conforming to IS: 2553-1992 (part-II) 53 12mm thick cleared toughened glass coforming to IS: 2553-1992 (Part-II) 54 Labour for Chipping of concrete surface before taking up Plastering work. 55 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. 56 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) 57 (A) 25 mm to 30 mm shuttering without staging in foundation 58 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. 59 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] 60 (i) with 1:6 cement mortar 61 (b) 20 mm thick plaster 62 (a) 15 mm thick plaster 63 (ii) with 1:4 cement mortar 64 (c) 10 mm thick plaster 65 ((b) Anti-termite treatment to the outside of foundationwith chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight, drilling 12mm. dia holes in concrete or masonry apron at an interval of 300mm. to a depth, of 300mm or more as close to the plinth wall as possible and the chemical emulsion pumped into those holes to soak the soil below at a rate of 2.25 litres per linear metre complete as per specification laid down in para 4.3.1.1 of Code I.S.-6313 (Part-III)-1981. 66 Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) 67 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc 68 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. (In Ground Floor)on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. (In Ground Floor) (b) Two Coats ii) Solvent based interior grade Acrylic Primer 69 Removing old scales, blisters etc. of interior surface of walls,ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge). 70 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) On steel or other metal surface :With super gloss (hi-gloss) -Two coats (with any shade except white) 71 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :(iv) Two coats (with any shade except white) 72 Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) 73 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. 74 Two Coat 75 Ground floor, Two coats upto 4mtr. from G.L. 76 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. 77 (Two Coat) 78 c) Super Protective 100% Acrylic Emulsion. 79 On old varnish surface including removing old varnish and exposingoriginal surface :(b) Two coats 80 Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria. 81 (ii) 66mm x 70mm 82 Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. In ground floor. 83 (ii) 25 mm thick 84 Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixingthe shutters in position but excluding the cost of hinges and other fittings in ground floor: 85 (a) 35mm thick shutters (single leaf) 86 Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor(iii) 9mm 87 Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1.5mm 88 Supplying, fitting and fixing Stainless Steel railing consist of 38mmdia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) 89 Supplying, fitting & fixing Surface mounted overhead Door Closer for 2 hour fire rated doors, of size EN-4 for leaf width upto 950/ 1100mm weighing maximum 60/ 80 kgs, CE certified, marked & conforming to EN 1154-2003 of approved quality of reputed brand, complete as per direction & satisfaction of Engineer-in-Charge.for leaf width upto 950mm 90 (b) Supplying Godrej mortice lock chromium plated with keys 6 levers including fitting & fixing complete. 91 Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: 92 Supplying, fitting, fixing UPVC pipes A type and fitting conforming to IS:13592-1992 with all necessary clamp, nails including making holes in walls, floor etc. cutting trenches in any soil through masonery concrete structures etc. if necessary and mending good damages including jointing with jointing materials (spun yarn, valamoid / bitument / M-seal etc.) complete. 93 A) UPVC pipes 94 i) 110mm dia. 95 B) UPVC fitting. 96 a) Plain Tee 97 i) 110mm dia. 98 b) Shoe 99 i) 110mm dia. 100 Sanitary & Plumbing works 101 Construction of Septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including 560mm dia R.C.C. man hole cover( heavy type) of approved make supplied, fitted and fixed in the 100mm thick R.C.C. (1:1.5:3) top slab with necessary fittings 20mm thick cement plaster (4: 1) with neat cement finish to the internal surface and 15mm thick cement plaster (4: 1) to the out side wall upto 200mm below G.L floorfinished with 25mm thick gray artificial stone over 100mm thick R.C.C. (1:1.5:3) bottom slab including supplying, fitting and fixing all necessaryspecials, fitting S.W. tees, C. I. foot rest etc. including Excavation earth in all sorts of soil, Shoring, bailing out and pumping out water as necessary, ramming and dressing the bed and bailing out and fefilling the sides of the tanks with earth, removing Spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5%(i) For 10 users1) With Pakur Variety (SAIL/TATA/RINL) 102 Construction of Circular Soak Well 2.5mtr. deep in alltype of Sandy Soils with dry brick work upto 1.6mtr. from the bottom having 150mm intermidiate cement brick work (1:4)band all around and cement brick work (1:4)upto 0.90mtr. from top with 20mm thick cement plaster (4:1) to inside face upto depth of cement brick work , 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6mm thick cement plaster (1:4) on top of R.C.C. cover slab including filling bottom 1.0m of inside of well with brick metal (50 to 63mm size) includijng R.C.C. cover slab of 100mm thick with cement conc.(1:1.5:3)with stonchips with necessary reinforcement and shuttering including one 560mm dia R.C.C. mahole cover (heavy type ) of approved make supplied, fitted and fixed in the cover slab with necessary fittijngs making necessary arrangements for pipe connection, excavationof well including shoring , dewatering and removing the excess earthfrom the premises as per direction complete in all respect with all costs of labour and materials.with 250mm thick dry brick workand 250mm thick cement brick work (1: 6) and 1.00m inside dia. For SAIL/TATA/RINL 103 Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) 104 i)100 mm 105 ii) 80 mm 106 iii)40 mm 107 iv) 32 mm 108 v) 25 mm 109 vi)20 mm 110 vii)15 mm 111 (Z) Compact Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings. 112 15 mm 113 25 mm 114 32 mm 115 50 mm 116 Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). 50mm 117 (i) Nipple (75 mm long) 118 Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer 119 (h) 5000 litre capacity 120 (d) 2000 litre capacity 121 (b) 1000 litre capacity 122 Wash Basin( 630x450) vitreous china of approved make (with out fitting) supplied, fitted and fixed in position on 75mmX 75mmX 75mm wood blocks and C.I. bracket including two coats of painting of C.I. brackets. 123 Supplying, fitting and fixing pedestal of approved make for wash basin (white) 124 Supplying, fitting and fixing White Vitreous China Sink in position on C.I. brackets including two coats of painting of brackets.(ii) 610 mm X 450 mm X 250 mm 125 Supplying, fitting & Fixing EWC (Size- 710x370x810 mm)in white glazed vitreous chinaware of approved make supplying, fitting and fixing in position complete with necessary nut and bolts. (Model Code No. S10221114-P Trap (CRUSE SET) of CERA or equivalent.). 126 Supplying, fitting and fixing 32 mm dia.P.V.C. Waste pipe Complete 1050mm long 127 Supplying, fitting and fixing piller cock of approved make. CP Piller cock-15mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR/ or Equivalent) 128 Supplying, fitting & fixing approved brand P.V.C. connector pipe white flexible, with both ends coupling with heavy brass C.P. nuts, 15mm dia. 600mm long all complete 129 Supplying, fitting & fixing Bib cock or stop cock (ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand) 130 Supplying, fitting & fixing Bib cock or stop cock(ii) Chromium plated Bib Cock with wall flange (Equivalent to Code No.5047 & Model - Florentine of Jaquar or similar brand). 131 (ii) Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand). 132 Supplying, fitting and fixing 10 litre white glazed vitreous chinaware of approve low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal fittings. (Model Code No. S1060106 of CERA or equivalent.) White 133 (b) Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentineof Jaquar or similar brand). 134 (d) Chromium plated Hand shower with Flexible Tube & fittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar).). 135 e) (i) CP Centre hole Basin mixture with regular spout without popup waste system with 450 mm long braided hoses. (Equivalent to Code No. 5167(B) & Model - FLORENTINE of JAQUAR or similar brand). 136 e) (ii) CP Wall Mixture without spout but with provision for connnection to Telephone Shower and exposed pipe for Overhead shower (Equivalent to Code No. 5215 & Model - FLORENTINE of JAQUAR or similar brand). 137 Supplying, fitting & fixingTowel Rail with two brackets (C.P. over brass- 25mm dia 600mm long) . 138 Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm 139 Supplying, fitting & fixing liquid soap container (PTMT- Prayag or equivalent) . 140 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 141 Supplying of Air conditon of 1.5 ton:suitable for room size up to 150 sq ft 5 star BEE rating 2019 foe energy saving up to 25%(Compare to Non inverter 1 satr) Auto Restart: No need to manually reset the setting post power cut. Copper energy efficient,best in class cooling with easy maintenance.Sleep mode:Auto adjust the temparature (including all taxes and installation charge)
|
