|
tender for Material Supply For Nrega And Other Schemes Works In Gp Thekda , 1 Ghadla/Kankar/Jhajhra 2 Mortar-soil/mud masala 3 Lime from Kali kiln for masonry work 4 Cement 5 P.P.C. 6 White Cement 7 Fine Aggregate 8 Sand/ Gravel 9 Gravel - Local 10 Fly Ash 11 Surkhi 12 Stone Dust (In Masonry Work) 13 Ballast of Stone/Brick (For Other than Road work) 14 40mm measured stone (Grit broken by hand) (Cut voids 1/11) 15 40mm stone (Broken by crusher) (Cut voids 1/11) 16 20mm stone (Broken by crusher) 17 12/10/6mm stone (Broken by crusher) 18 Brick ballast 19 Material for Road Work (Including 5 Km. Lead) 20 63-40mm stone broken by crusher (Cut voids 1/11) 21 63-40 mm Hand broken stone aggregate (cut voids 1/11) 22 90-45 mm. Hand broken stone aggregate(Cut voids 1/11) 23 Quarry rubbish(Cut voids 1/6) 24 Gravel(Cut voids 1/6) 25 Kankar(Cut voids 1/6) 26 Binding material (PI 4-6)(Cut voids 1/6) 27 Brick (22.5 X 11 X 7.50 cm) 28 I st class 29 II class 30 Soling/ Kharanja/ Masonry stone 31 Masonry Beradda (RR) 32 Masonry Radda (CR) 33 Kharanja soling (for flooring work upto 15cm height) 34 Kharanja soling (for road/ Kharanja work upto 23cm height) 35 Jodhpuri type stone strips/arches/cuts (length 2-3", width 10-12",Thickness 2.5-3.5") 36 Stone Chips (Flaky Material)(3-4" Thick & Length and Width 1-2") 37 Sandstone(DPC,Sill,Coping,Lintel,Tand,Almirha etc) 38 Upto 25mm Thickness 39 Upto 25-40mm Thickness 40 Upto 40-50mm Thickness 41 Upto 50-75mm Thickness 42 Upto 75-100mm Thickness 43 Upto 100-150mm Thickness 44 Flooring / Patti Pattan Katla Stone 45 Flooring Katla upto 35mm Thick, min. 3 sqft or more Area 46 Patti Pattan Katla 60-75mm Thickness, min. 3 sqft or more Area 47 Unpolished Rough Kota Stone 48 900 sq. cm 49 Upto 901 to 2300 sq. cm. 50 Above 2300 sq. cm. 51 Polished Kota Stone(One Side Polished) 52 Upto 900 sq. cm. 53 Upto 901 to 2300 sq. cm. 54 Above 2300 sq. cm. 55 Marble Stone(Makrana Adanga 20mm Thick) 56 Upto 900 sq. cm. 57 Upto 901 to 2300 sq. cm. 58 Above 2300 sq. cm. 59 Marble Chips 60 Marble Powder 61 Marble Stone(Rajnagar II Quality/Local 20mm Thick) 62 Upto 900 sq. cm. 63 Upto 901 to 2300 sq. cm. 64 Above 2300 sq. cm. 65 Stone Frame 66 Single Paitaam Size 100 X 75 mm. 67 Double Pattam Size 125 X 75 mm. 68 stone tablets 69 Up to 1.5 m Length, Minimum 40mm thick 70 1.5 m to 2.40 m Length, Minimum 50mm thick 71 2.4 m to 3.0 m Length, Minimum 65mm thick 72 Above 3.0 m Length, Minimum 75mm thick 73 Precast Tiles / Blocks 74 Glazed Size-30X45 cm 75 Mosaic Size-40mm Thick 76 Vitrified Size-60X60 cm 77 Interlock Tiles/Brick/Block for Road Work 78 Cement Interlocking Block M-30grade, 60mm Thick 79 Cement Interlocking Block M-30grade, 80mm Thick 80 Cement Interlocking Block M-30grade, 100mm Thick 81 FR PVC Insulated Copper Conductor Single Core Cable ISI Marked 82 1.50 sq.mm. 83 2.50 sq.mm. 84 0.50 sq.mm. 85 1.00 sq.mm. 86 4.00 sq.mm. 87 6.00 sq.mm. 88 Local wood with fittings (for doors, windows and furniture) 89 Mango 90 Acacia 91 Others 92 Factory made doors (30mm thick, solid core single leaf) 93 Structural steel 94 Iron (Tor steel Fe 415/500 for reinforcement) 95 Winding wire 18 gauge 96 Iron girders 97 Conia Iron/Square Bar/Patti/Angle Iron 98 Barbed Iron Wire(Size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage 99 Mesh 100 Iron Mesh (24 Gauge, 14 Mesh) 101 Cement Concrete Mesh Akash Patal 40 mm Thick 102 Glass 103 3 mm Thick Glass 104 Colour-Paint 105 Enamel Paint 106 Distemper (Water Bound) 107 Lime - for Painting (Aras / Kali) 108 Primer (For Iron / Wood) 109 Petroleum Products 110 Diesel HSD 111 Movil Oil 112 Bitumen Shalitex Board (25 mm Thick) 113 Plain Sheet 114 G.I. Sheet 22 Gauge (0.80 mm) 115 G.I. Sheet 24 Gauge(0.63 mm) 116 M.S. Sheet 22 Gauge (0.80 mm) 117 M.S. Sheet 24 Gauge (0.63 mm) 118 Corrugated Sheet 119 G.I. Sheet 1 mm thick 120 G.I. Sheet 22 Gauge(0.80 M.M.) 121 Asbestos Cement Sheet 6mm(2.5/2.75X1m) 122 Other Sheets 123 PVC Sheet 1mm thick (coloured/plain) 124 Green Yellow Literof Expo Sheet(183X90) 125 Pipes 126 GI 15mm dia(B Class) 127 GI 20mm dia(B Class) 128 GI 25mm dia(B Class) 129 AC 75mm dia 130 AC 100mm dia 131 PVC 90mm dia(with ring) 132 PVC 110mm Diameter(with ring) 133 P.V.C. 140 mm. Diameter(with ring) 134 P.V.C. 110 mm.(2.5kg/sq.cm) with coupler 135 Sanitary 136 Indian W.C. 137 Orrisa W.C. 138 European W.C. 139 Foot Rest 140 Porcelain Urinal 430*350*300 mm with coupler, bracket and P.V.C. waste pipe 141 Wash-Basin 450*300 mm with coupler, bracket and P.V.C. waste pipe 142 Stone furnace (S.W.) pipe 100 M.M. diameter, 0.6 m long 143 CP Pillar Cock (dia 15 mm) (IS Mark) 144 CP Bib Cock (dia 15 mm)(IS Mark) 145 CP Grating of 125 mm dia 146 RCC NP3 Hume Pipe with Collar 147 1200mm dia 148 1000mm dia 149 750mm dia 150 600mm dia 151 450mm dia 152 300mm dia 153 Steel Conduit ISI Marked 154 20 mm dia 155 25 mm dia 156 Charcoal 157 PVC Water Tank with Cover (Conforming to IS:12701-1989) 158 13/0.20 mm Twin core PVC sheathed, flat flexible copper cable 159 Steel fasteners 6 mm x 75 mm 160 PVC Conduit ISI Marked 161 25 mm Diameter 162 20 mm Diameter 163 Junction Box 164 20 mm Two way 165 20 mm, One way 166 25 mm Two way 167 20 mm One way (PVC) 168 Module GI Box 169 For 3 Modules 170 For 2 Modules 171 Module Base & Cover Plate 172 For 2 Modules 173 3 for Module 174 Modular Switch One Way, ISI Marked 175 SP 15/16 Ampere 176 SP 5/6 Ampere 177 Modular Socket Outlet, ISI Marked 178 3 Pin 5/6 Ampere 179 6 Pin 15/16 Ampere 180 MCB DB 181 2+2 Way, SPN, Single Door 182 2+4 Way, SPN, Single Door 183 2+6 Way, SPN, Single Door 184 GI Pipe (Medium Grade) 185 15.00 mm Diameter 186 40.00 mm Diameter 187 Copper Wire 8 SWG (4.00 mm Diameter) (0.117 Kg/m) 188 CI/MS Cover Plate, Frame with Locking Arrangement Attached to 189 Equipment (with POL and driver) 190 Diesel Road Roller 8 to 10 ton 191 Sheep Foot Roller 192 Truck 9 ton 193 Tractor (25-40 HP) 194 Tractor Trolley 195 Tractor Water Tanker Capacity 4000 Liter Water 196 Cement Concrete Mixer 5-7 Cubic Feet 197 Pumping Set 15 HP 198 Niddle/Plate Vibrator with Operator 199 Camel Cart/Bullock Cart with Driver 200 Grinding Machine with Operator (Large, Motor Driven) 201 Compressor 202 Hydraulic Excavater/JCB (Bucket Capacity 0.4cum) 203 Dumper 204 Scraper 205 Shuttering of wooden planks, with beams and others Material including TP, to be installed at site, removed after the stipulated period 206 Shuttering ply, pole and other material including TP, to be installed at site, removed after the stipulated period 207 Shuttering iron plate, pole and other material including TP, to be installed at site, removed after the stipulated period 208 Water and pumping expenses (filling) 209 Grinding machine with operator (small, hand operated) 210 Iron form for well (diameter 3m, height 75cm) along with TP, to be installed at site, removed after the stipulated period 211 Cultivator
|
