Tender For Loose Furniture For Museum At Rashtra Prerna Sthal, Lucknow, U.P. - Making And Placing In Positio ... in India

Work Detail

Tender For Loose Furniture For Museum At Rashtra Prerna Sthal, Lucknow, U.P. - Making and Placing in position Solid Acrylic top counter as per design and approval of the architect made out of 19 mm thk. waterproof block board with drawers sides out of 12 mm thk.waterproof ply wood including making one storage unit, one drawer unit and one keyboard tray.The keyboard tray and drawer shall run on powder coated M.S. channels. All exposed horizontal/ vertical surfaces shall be cold pressed with 1.5 mm. thk. laminate (Basic rate of Rs 100 per sft) as per drawing. All internal surfaces shall be pressed with backing laminate. All exposed edges of the board shall have a wood frame (basic rate of Rs. 4000 per cft) of section size 25 x 25 mm with 6 mm wide grooves. The Visitor side top and front shall have 12 mm thk. Solid Acrylic (color, shade as per the approval) with full round moulding on both edges and fixed to the block board with adhesive. All complete as per the approval of the Architect/ Engineer-in-charge. 2 Supplying and placing Center Table with overall size of 1300 x 700 x 380 cm. Sturdy Shesham wood frame, solid wooden legs, and tempered glass top. Versatile glass top in a neutral colour and contrasting darker legs in walnut shade as approved by Architect.2 additional drawers that let you keep small accessories handy. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified.All complete as per the approval of the Architect/ Engineer-in-charge. 3 Supply and placing square side table 600mm x 600mm Height : 49.8cm Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Drawer bottom is made of .9 mm thick prelaminated particle board .Drawer front is made of 18 mm thick PU painted MDF . Legs : Rubber wood . Hardware : Hettich . Construction : Knock down .Finish :All 18 mm prelaminated particle board panels are Noce Versailles with walnut edge band. PU lamination is high gloss in Ecru shade approved by the Architect. Packets : 1 nos . Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Hardware : Hettich . Construction : Knock down .Finish : • All 18 mm prelaminated particle board panels are Noce Versailles with walnut edge band . PU lamination is high gloss in Ecru shade .Packets : 1 nos. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified.All complete as per the approval of the Architect/ Engineer-in-charge. 4 Supplying and placing TV Unit With Sturdy Sheesham wood frame and legs, along with a tempered glass top. Versatile glass top in a neutral colour and contrasting darker legs in walnut shade approved by the Architect. Comes equipped with three big drawers for additional storage. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified.All complete as per the approval of the Architect/ Engineer-in-charge. 5 Supplying and placing Rectangular centre table size 1200mm x 600mm with Top: Solid veneer MDF Table Top with 18mm and LEGS: Solid Rubber wood as approved by the Architect.Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. All complete as per the approval of the Architect/ Engineer-in-charge. 6 Supplying and placing corner table size 600mm x 600mm with Top: Solid veneer MDF Table Top with 18mm and LEGS: Solid Rubber woodManufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified.All complete as per the approval of the Architect/ Engineer-in-charge. 7 Supplying and placing in position Main Desk with ERU of size 1650 Width x 700 Depth x 743 Height (Main Desk) 1000 WidthX 450DepthX 743 Height (ERU).Top shall be of 18 mm thickness made of PLT board with 2 mm Edge banding. Wenge and savannah Maple PLT board as approved by the Architect shall be used. The Under structure shall be in pre-laminated panels made with PLT boards . 2- Drawer and 3 - Drawer storage units with different combinations to support tops made with 18 mm PLT boards of different colours approved by the Architect. Modesty and back panels made with 18 mm PLT boards. The pedestals / storages shall be fitted with necessary locks. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified.All complete as per the approval of the Architect/ Engineer-in-charge. 8 Supplying and placing in position Main desk of the following specifications. The Main table shall be of size 3600 Width mm x 1080 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU as per approval of the Architect. The Main desk should contain in Smart Case - space slides effortlessly in style. The mobile Pedestal shall be of size 480 Width mm x 640 Depth mm x 600 Height mm. Mobile pedestal shall be coated of MDF (medium density fiber ) with veneer coating and PU coating. The ERU Top shall be of MDF (medium density fiber) board duly finished with veneer and final PU coating. Size of ERU top 1900 Width mm x 480 Depth mm x 550. The main desk is provided with the wire management system also there is perfect storage side unitManufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified.All complete as per the approval of the Architect/ Engineer-in-charge. 9 Supplying and placing storage unit with side table with overall size of 600x600mm. The side table to include a removable panel and compartments for cable organization to keep a clutter-free workspace with all your cords neatly hidden while still easily accessible. Tabletop provides surface area to keep knick-knacks or décor items.Sleek and modern look with walnut finish complements as per approval of Architect. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified.All complete as per the approval of the Architect/ Engineer-in-charge. 10 Supplying and placing round circular dining table with 1800 mm dia. that is perfect for compact spaces, creating a cosy and comfortable ambience.With attractive options for tabletop patterns and finishes, the table would fit in easily with any interior style. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified.All complete as per the approval of the Architect/ Engineer-in-charge. 11 Supplying and placing round circular cafe table with top made of combination of 12mm and 6mm thk Corian (matt finish) of approved colour, and 18mm thk Marine ply(BWP Grade)(As per IS:710) with 0.6mm backing laminate on bottom side as per approval of Architect. The under-structure consists of an Inner Tube Assembly with Top Plate, for Worktop Mounting, & an Outer Tube Assembly with Round/Rectangle/Square Bottom Plate. The Top Plate is made of 5mm thk HOT ROLLED Steel Plates (HR) (As per 15:2062) & the bottom plate is made of 8mm thk HOT ROLLED Steel Plates (HR) (As per 1S:2062). The whole structure is EPOXY POLYESTER Powder Coated (DFT 40-60 microns). The product has a knock-down construction. It is assembled using alloy steel hardware (blackened & coated with rust preventive oil).Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified.All complete as per the approval of the Architect/ Engineer-in-charge. 12 Supplying and placing librarian table with overall size of 1500W X 870D X 740H made of 25mm Thick Pre-laminated twin board of E1 grade and approved shade as per Architect, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Power box made with 0.8 mm thick CRCA, with switch plate (8+3 Module cutout provision). This is fixed with worktop along the width atnAccess Flap position Made of 25mm Thick Pre-laminated twin board of E1 grade and approved shade as per Architect. Edge banded with matching 2 mm thick PVC lipping. Made of 18mm Thick Pre-laminated twin board of E1 grade and approved shade as per Architect. Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. Product Should be Greenguard UL Certified.All complete as per the approval of the Architect/ Engineer-in-charge. 13 Supplying and placing unitized meeting table with overall size of 3600x1500mm made of 25mm thick MDF­one side prelaminated board conforming to IS­14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade as per Architect conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. The table is equipped with Extron cables cubbies along with cable retractors as standard offering. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. Product Should be Greenguard UL Certified.All complete as per the approval of the Architect/ Engineer-in-charge. 14 Supplying and placing workstation with desk-based system with a platform under structure made up of a combination of MS. Tubes and plates. The terminating legs can be chosen from the different varieties of inhouse design and manufactured legs. These terminating leg structure shall be in M.S. CRCA sheet/ tubes/rods finished with epoxy power coating of the approved colour as per the project designer. The terminating legs can be provided with modesty panels optionally. These modesty panel shall be of Acrylic (8 mm thick Acrylic both side frosted) or of Metal 1.2 mm thick CRCA. Worktop shall be made of 25MM thick Pre-Laminated Board. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The worktop shall be complete with provisions for screen mounting as well as for wire management on the workstation. Provisions for fixing of the switches shall be on the wire tray/channel. Wire management shall be a part of the under structure and can be in the form of enclosed metal tray or 2 level enclosed channel to provide concealed wire management throughout the cluster formation. Provision for separation of Data and power cable shall be provided in the selected option. Wire riser leg or independent wire risers shall be provided as per the layout structure. All the wire management components shall be of MS sheet with varying thickness as required to support and form a sturdy under structure to carry wires. Screen shall be provided as per the requirement of the design and layout. The screen finishes can be selected from Fabric, laminated coloured glass, and DL marker board. Fabric screens shall be of 19 mm overall thick, Glass screens are of 8 MM thick as approved by Architect. The overall size of the worktop shall be 1200mm x 600mmD. The overall size of the workstation shall be 1200W1 x 600D x 1200mmH. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. Product Should be BIFMA LEVEL 2 and Greenguard UL Certified.All complete as per the approval of the Architect/ Engineer-in-charge. 15 Supplying and placing High Back Chair with seat made up of 1.2+/-0.1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric or synthetic leather and moulded polyurethane foam as per approval of Architect. The back shall be made up 1.2+/-0.1cm thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The moulded polyurethane foam shall be ofdensity 45+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 51.0cm(W) x 48.0cm(D) and of back shall be 48.0cm(W) x 76.0cm(H). The armrest top shall be made of moulded polyurethane and mounted on to a drop lift height adjustable type M.S tubular armrest support chrome plated. The armrest height shall be adjustable up to 6.5+/-0.5cm in 5 steps. Overall dimensions of Chair shall be, Width of Chair - 76.0cm, Depth of Chair - 76.0cm as measured from pedestal below. Heightfrom ground - min 101.5 to max 117.5cm. Seat height - min 46.9 to max 55.9cm. Dimensions tolerance / variations shall be within +/- 1 cm. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. Product Should be BIFMA LEVEL 2 and Greenguard UL Certified.All complete as per the approval of the Architect/ Engineer-in-charge. 16 Supplying and placing The midback chair shall feature a seat and back made of 1.2±0.1 cm thick hot-pressed plywood, upholstered with fabric or synthetic leather and moulded polyurethane foam (density 45±2 kg/m³, hardness 16±2 kgf per IS:7888). Seat dimensions: 51.0 cm (W) × 48.0 cm (D); back dimensions: 48.0 cm (W) × 64.5 cm (H). Armrests shall have a polyurethane top on height-adjustable (6.5±0.5 cm in 5 steps) chrome-plated MS tubular supports. The chair mechanism shall include 360° rotation, knee-tilt synchro, tilt tension adjustment, single-point control, 4-position locking with anti-shock, and a 1:2 seat/back tilt ratio, with seat depth adjustable (6.0±0.5 cm, 6 positions). The backrest shall have a sliding adjustment (7.5±0.5 cm, 4 positions) for lumbar support, and pneumatic height adjustment (9.0±0.3 cm stroke). The pedestal shall be 0.2±0.02 cm thick chrome-plated HR sheet with a PP hub cap, 66.0±0.5 cm PCD (76.0±1.0 cm with twin black nylon castors). Overall dimensions: 76.0 cm (W) × 76.0 cm (D); height: 89.0–105.0 cm; seat height: 46.9–55.9 cm (tolerances ±1 cm). Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. Product Should be BIFMA LEVEL 2 and Greenguard UL Certified. All complete as per the approval of the Architect/ Engineer-in-charge. 17 Supplying and installing The high-back revolving chair shall be upholstered in Napa leather (shade approved by the Architect) with a seat assembly comprising injection-moulded glass-filled polyamide inner and HR polyurethane foam (density 45±2 kg/m³, hardness 16±2 kgf per IS:7888), sized 45.5 cm (D) × 52.4 cm (W). The back assembly shall feature PU foam over a polypropylene inner, sized 50.5 cm (W) × 76.7 cm (H). Armrests shall have a high-density PU top over glass-filled polyamide, with four-way adjustments: height (8 positions, 10.5±0.5 cm range), swivel (2 positions, 12°±2°), width (2.0±0.5 cm per side), and fore-aft (4.0±0.5 cm). The mechanism shall include 360° rotation, forward tilt, upright tilt lock, tilt tension adjustment, and 3-position tilt limiter. Seat depth adjustment (5.0±0.5 cm) shall be integrated with a polypropylene seat cover, while the back height shall be adjustable (7.5±0.5 cm) via a buff-polished die-cast aluminium spine. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. Product Should be BIFMA LEVEL 2 and Greenguard UL Certified..All complete as per the approval of the Architect/ Engineer-in-charge. 18 Supplying and installing mid-back revolving chair shall be upholstered in Napa leather, featuring a seat assembly with an injection-moulded glass-filled polyamide inner and HR polyurethane foam (density 45±2 kg/m³, hardness 16±2 kgf per IS:7888), sized 45.5 cm (D) × 52.4 cm (W). The back assembly shall consist of PU foam over a polypropylene inner, sized 50.5 cm (W) × 61.8 cm (H). Armrests shall have a high-density PU top over glass-filled polyamide, with four-way adjustments: height (8 positions, 10.5±0.5 cm range), swivel (2 positions, 12°±2°), width (2.0±0.5 cm per side), and fore-aft (4.0±0.5 cm). The mechanism shall include 360° rotation, forward tilt, upright tilt lock, tilt tension adjustment, and 3-position tilt limiter. Seat depth adjustment (5.0±0.5 cm) shall be integrated with a polypropylene seat cover, while the back height shall be adjustable (7.5±0.5 cm) via a buff-polished die-cast aluminium spine. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. Product Should be BIFMA LEVEL 2 and Greenguard UL Certified.All complete as per the approval of the Architect/ Engineer-in-charge. 19 Supply & placing mid-back revolving chair shall have a seat assembly made of 1.5±0.1 cm thick hot-pressed plywood upholstered with fabric and moulded HR polyurethane foam (density 45±2 kg/m³, hardness 16±2 kgf per IS:7888), sized 51.8 cm (W) × 49.7 cm (D). The back assembly shall be injection-moulded glass-filled nylon upholstered with mesh fabric, featuring an adjustable polypropylene lumbar support (5.0±0.1 cm range), sized 47.9 cm (W) × 66.9 cm (H). Adjustable armrests shall have a polypropylene base with PU top, offering height (6.0±0.1 cm), swivel, and fore-aft adjustments. The active bio-synchro mechanism shall include 360° rotation, front-pivot tilt with continuous lumbar support, tilt tension adjustment, 5-position tilt limiter, and 1:2 seat/back tilting ratio, housed in black powder-coated HPDC aluminium (DFT 40-60 microns). Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. Product Should be BIFMA LEVEL 2 and Greenguard UL Certified. All complete as per the approval of the Architect/ Engineer-in-charge. 20 Supplying and placing dining chair (600x600x800mm overall) shall have an under structure of MS tubular frame (31.75x1.2mm) with 3mm MS plates and polypropylene leg caps. The upholstered seat shall consist of 12mm plywood with 50mm PU foam and Recron sheet wrapping, mounted on the frame via EBCO swivel mechanism. The back shell shall be 12mm plywood with 25mm PU foam and Recron wrapping, connected to the seat with 3mm MS brackets on three sides. All metal components shall be powder-coated Ink Black (50±10 microns DFT) in knock-down construction - with under structure and upholstered seat-back shell packed separately.All complete as per the approval of the Architect/ Engineer-in-charge. 21 Supplying and placing café chair (47.7×53.6×81.3cm overall) shall feature a single-piece seat-back shell made of injection-moulded, high-impact glass-filled polypropylene (color as per catalogue), sized 44.0×50.2×40.5cm. The under structure shall consist of welded MS bright bar (Ø1.2cm) with 0.16±0.008cm CRCA sheet attachment points, powder-coated (DFT 50±10 microns) and fitted with polypropylene shoes. Optional polypropylene ganging shoes may be provided for LP-SM6 models. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. Product Should be BIFMA LEVEL 2 and Greenguard UL Certified.All complete as per the approval of the Architect/ Engineer-in-charge. 22 Supplying and placing library chairs, compliant with IS 4833 and IS 3518, featuring moulded polypropylene (PP) seats, UV-stabilized finish, chrome-plated steel frames, stackable design, anti-skid footrests. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. Product Should be BIFMA LEVEL 2 and Greenguard UL Certified.All complete as per the approval of the Architect/ Engineer-in-charge. 23 Supply & Placing theater chairs shall feature an auto-tip-up seat assembly with a 1.9±0.02cm × 0.16±0.013cm MS tubular frame, upholstered with fabric over HR polyurethane foam (density 45±3 kg/m³), sized 45.5cm (W) × 46.5cm (D). The backrest (High Back: 45.5×82.4cm / Mid Back: 45.5×70.4cm) shall have a flexi-back mechanism with a similar MS frame and plastic cover. Side panels (0.12±0.02cm CR steel, fabric-clad) shall be floor-anchored (2 anchors/panel). Armrests shall be either PU foam (65±10 Shore A, wooden insert) or solid beech wood (lacquered), mounted via concealed hinges. The retractable desklet (27±0.1×32±0.1cm) shall use 1.8±0.05cm pre-laminated particleboard with PP edging, mounted on a die-cast aluminium arm. All steel components shall be epoxy-polyester powder-coated (DFT 40–60 microns). Installation shall comply with flooring prerequisites. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. Product Should be BIFMA LEVEL 2 and Greenguard UL Certified.All complete as per the approval of the Architect/ Engineer-in-charge. 24 Supplying and placing 32str sofa with Dimensions W x H x D (cm)- 127.5 x 83.5 x 80 Finish Color - As per selectionSeat Height (cm) - 46.5Upholstery Material - Synthetic LeatherWarranty - 1 Year WarrantyPrimary Material - LeatheretteAesthetically pleasing, mid-back designer backrest with tufts and clean stitching. • Rounded armrests with soft foam seating provide ergonomic comfort. • Easy-to-clean synthetic leather or fabric for the cool touch and feel. All complete as per the approval of the Architect/ Engineer-in-charge. 25 Supplying and placing 32str sofa with Dimensions Width-1638, Depth-876, Height- 787, Height-445, Seat Depth-559 Color - As per selectionSeat Height (cm) - 46.5Upholstery Material - Full Leather Euro NappasPrimary Material - LeatherAesthetically pleasing, mid-back designer backrest with tufts and clean stitching. • Rounded armrests with soft foam seating provide ergonomic comfort. • Easy-to-clean synthetic leather or fabric for the cool touch and feel. All complete as per the approval of the Architect/ Engineer-in-charge. 26 Supplying and placing 2str with overall size of 152x84x76cm. sofa top grains ofleather adds to its aesthetic appeal, with soft foam at armrest and backrest for added comfort. Seasoned solid wood frame and a plywood cross-section in the under structure ensures durability. Sturdy rubberwood rounded legs that can easily take heavy loads, giving you the freedom to sit on it as you like without fearing damage. All complete as per the approval of the Architect/ Engineer-in-charge. 27 Supplying and placing 2str with overall size of 205x84x76cm. sofa top grains of leather adds to its aesthetic appeal, with soft foam at armrest and backrest for added comfort. Seasoned solid wood frame and a plywood cross-section in the under structure ensures durability. Sturdy rubberwood rounded legs that can easily take heavy loads, giving you the freedom to sit on it as you like without fearing damage. All complete as per the approval of the Architect/ Engineer-in-charge. 28 Supplying and placing 2str with overall size of 106x84x76cm. sofa top grains of leather adds to its aesthetic appeal, with soft foam at armrest and backrest for added comfort. Seasoned solid wood frame and a plywood cross-section in the under structure ensures durability. Sturdy rubberwood rounded legs that can easily take heavy loads, giving you the freedom to sit on it as you like without fearing damage. All complete as per the approval of the Architect/ Engineer-in-charge. 29 Supplying and placing TV cabinet (120cm W × 56cm D × 192cm H, without bush) shall be constructed with 18mm prelaminated particle board (Noce Versailles finish, 1.5mm walnut edge banding) for carcass panels, with upper vertical sides in 18mm PU and bottom side doors in 18mm MDF (PU front). Bottom middle doors shall be 4mm black toughened glass with PU paint. All doors shall feature push-to-open fittings, and levellers shall be installed on rear vertical panels for wall alignment. Hardware (Hettich) shall be used, and the unit shall be supplied in a knock-down construction with high-gloss PU lamination (Ecru shade). Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. All complete as per the approval of the Architect/ Engineer-in-charge. 30 Supplying & placing low height storage with size Width : 90cm Depth : 38.2cm Height : 90cmMaterial :All carcass panel are made of 18 mm prelaminated particleboard with edge banding 1.5 mm thickness. Bottom drawer is made of .9 mm thick prelaminated particle board. Back panel is made of .9mm thick prelaminated particle board .Drawer front is made of 18 mm thick Pu painted MDF .Hardware : Hettich .Construction : Knock down Finish : All 18 mm prelaminated particle board panels are NoceVersaillies with walnut edge band. PU lamination is high gloss in Ecru shade Packets. Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. All complete as per the approval of the Architect/ Engineer-in-charge. 31 Supplying & placing Single-Sided Wood & Steel Book Rack (1200x300x2078mm):The book rack shall consist of 0.8mm CRCA (IS:513) side panels, frame, cross L-brackets, and 10-bend shelf panels, with 2 tie rods (4mm MS, X-shaped), 4 fixing brackets (2mm CRCA), and 2 turnbuckles for structural stability. Wooden panels (25mm E1-P2 PLT board per FF04/DSN/STD/101) shall have 2mm PVC-lipped edges (hot melt EVA glue). The knock-down assembly includes 6 loading levels (5 adjustable shelves per unit), each supporting 80kg UDL. Back stiffeners (0.8mm CRCA) act as separators, while aluminium label holders (296mm length, 300GSM matte paper insert) are fitted on the front. All MS/CRCA components shall be epoxy-polyester powder-coated (min. 45µm DFT).Manufacturing Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. All complete as per the approval of the Architect/ Engineer-in-charge. 32 Supplying & placing locker units constructed from high-quality metal powdered coated with dimensions of 37.5 cm in width, 195 cm in height, and 47 cm in depth. The lockers should be six-door configurations, providing ample space for personal belongings. The supply and installation should include delivery to the site, assembly, and positioning as per the layout. All complete as per the approval of the Architect/ Engineer-in-charge.

Contact Information