Tender For Installation Work Of 9 Meter Octagonal Pole Light From Chanda Turn To Canal In Nagar Panchayat Pa ... in India

Work Detail

Tender For Installation work of 9 meter octagonal pole light from Chanda turn to canal in Nagar Panchayat Patti - Supply and fixing 09 Mtr GI octagonal pole of approved make (Top dia 70 mm, bottom dia 155 mm and based plate 12 mm thik having 3 mm thickness with single arm bracket (1 mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and required T&P complete in all respect. As PWD S.R. 2018 Item No. 645 2 Supply and Fixing of LED street light fitting having dle cost aluminium body and diffuses with driver set suitable for 75 to 90 watt. Confirming to IPGG Protection complete in all respect CAT-AAA 16500 system lumens high power LED with lenses> 110 lm/w, PF>0.95 THD< 10%, at ful load, CRI>70, potted driver set (not circuitory) phase to phase protection at 440 volt and >300 volt autocut and restart feature with 5 year warrantee.PWD SOR NO.1423. 3 Supply and laying of 25 mm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the engineer-incharge, complete in all respect. The armouring of the cable shall be propery connected with the earth conductor by clamps etc. as PWD SR 2018 ITEM No. 501(J). 4 Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads insulting with tape and making connection etc. all complete As PED SR 2018 ITEM No. 504€ 5 Supply and wiriing of 3 number 4.5 sq. mm FRISH PVC insulated 1100 V grade multistrabd single core copper conductor cable in 25 mm dia heavy gauge rigid steel condult on surface with two number 14 SWG copper earth continulty wire etc complete in all respect. As PWD SR 2018 ITEM No. 231(b). 6 Supply and fixing of 65 AMP 415 volts metal clad TP rewirabble type switch fuse unit on Angle Iron bracket completed in all respects. CAT-B. As PWD schedule of rate for electrical works 2018 ITEM No. 316 cat-b. 7 Supply and laying of under ground power supply cable work through HDPE pipe including providing and laying of HDPE pipe, road cutting, end connections terminations etc. as required as per specification complete and making good off. 8 Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with Its top at least 3 meters below ground level complete with 20 mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire In 15 mm dia G.I. pipe up to switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30 cm square C.I. frame with hinged cover masonry housing alternate layers of chrcoal/coke and salt at least 150 mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing (this will apply for earthing of poles also). As PWD SR 2018 ITEM No. 702 9 Supply & Control pannel houssing comprising of suitable 31A TPΝ MCB in corner, Automatic timer controll circuit for automatic on/off at, Highmast type (PWD SL No. F111)

Contact Information