|
Tender For Interior And Renovation Works Of Entrance Hall Dome At Vidhan Sabha, Lucknow - Cost of shifting, Malba disposal and dumping at appropriate site 3 Punning/Putty Lime punning with lime putty mixed with Gur,Bilgri,Urd and other ingredients followed by grinding to fine paste for smooth finish 4 Removing Cracked & bulged lime concrete Very Carefully using specialised tools by the means of manual labour Without use any mechanical means Including Stacking Of Dead Material & Throwing Malba Beyond Monument upto 150 mm including disposal of Malba within 50 m lead. Based on DSR 15.1 . 5 Waterproofing Providingandapplyingfibrereinforcedelastomericliquidwater proofingmembranewithresilientacrylicpolymershavingSun ReflectivityIndex(SRI)of105ontopofconcreteroofinthree coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of3:1)andtwocoatsofundilutedelastomericwaterproofing liquid (dry film thickness of complete application/system not less than 500microns). The operation shall be carried outafter scrappingandproperlycleaningthesurfacetoremoveloose particleswithwirebrushes,completeinallrespectasperthe direction of Engineer- in-Charge. 6 White Wash Providing and applying three coats of white wash using fresh slaked lime mixed with natural gum and indigo (neel) over surfaces prepared with well-matured lime putty (Class C fat lime, slaked and soaked min. 7 days). Includes surface cleaning, filling of minor cracks/undulations, and uniform brush application over moist surface with proper drying between coats. Final finish to be smooth, even, and streak-free. 7 Stucco textured Paint Providing and Finishing wall with Smooth textured Stucco Marble/Sea shell/mettalics crinkle paint high sheen and smooth finish(oyster grey) shade to be aproved by Architect in charge (asian or equivalent) 8 Dune paint on ceiling Providing and applying Dune texture paint on ceiling including surface preparation, application of suitable primer, and finishing with Dune texture using manufacturer-recommended tools and techniques. The surface shall be cleaned, leveled, and made free from dust, grease, and loose particles. Texture shall be applied in a uniform pattern as per approved sample, followed by necessary top coat/paint finish as per manufacturer"s specifications. Rate to include cost of all materials, labor, scaffolding, tools, and equipment required for proper completion of work. 9 Ornamental Cornicing Providing , supplying and fixing of Classical ornamental Coffered POP Cornice with all the engraving, ornamentation and extrusions on the edge of false celing including the cost of necessary fittings and fixtures as required as per drawing from Arhcitect in Charge 10 Ornamented artwork Finishing Artwork Through Handwork includes the manual enhancement of pre-prepared artwork by skilled artisans using approved techniques such as hand-painting, polishing, inlay, or texturing. All materials—paints, varnishes, foils, etc.—shall be of approved make, conforming to IS standards, non-toxic, and weather-resistant if used outdoors. Surfaces must be clean and properly prepared before application. Only hand tools are permitted unless otherwise approved. The finish must be neat, uniform, and match the approved sample. Rates shall include all materials, labour, tools, scaffolding, and site cleaning. Measurement will be made per square foot or per piece of completed and accepted work. 11 Providing and fixing customized bamboo scaffolding system on the inner side of the building upto height 15m, constructed using 50-75 mm diameter bamboo members placed at 1.5 metre intervals or as required both horizontally and vertically. The scaffolding shall be securely tied and braced with horizontal runners, diagonal bracings, and adequate connections to the building structure to ensure rigidity, stability, and safety during execution of work.The scaffolding shall be maintained in a safe and serviceable condition for the entire duration of its requirement and shall be dismantled and removed thereafter without causing damage to the building or adjacent works. The system shall include all necessary safety features for workmen and provisions to allow inspection and execution of work at all required locations, all as per the directions and approval of the Architect-in-Charge. 12 Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100 gram / sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) 13 Furniture/Wall Covering Providing and fixing protective covering over existing furniture and fixtures using polyethylene sheets/plastic rolls to safeguard against dust, paint, and damage during dome painting work. Includes proper wrapping, securing, and removal after completion of work, ensuring no damage to furniture. Work to be executed as per the direction of Architect-in-Charge. 14 Mirror Polishing Mirror polishing surfaces to achieve a high-gloss (mirror) or matte finish as required, using mechanical grinding and polishing machines. The process shall include multi-stage grinding with graded abrasive stones (from coarse grit #60 to fine grit #3000 or higher), filling of pinholes, hairline cracks, and surface imperfections with color-matched epoxy or stone filler, and final buffing using polishing powders or approved chemicals to obtain a smooth and uniform reflective surface. Polishing shall be executed with precision to maintain even surface level, protect joints and edges, and ensure a consistent finish throughout.The rate includes the cost of all labour, materials, tools, consumables, polishing compounds, and machinery required to complete the work as per specifications and site conditions. 15 POP Work on Dome Providing & applying Water Resistant and Quick Drying, Non Curable Type of average 10-20 mm thick plaster of Paris and wire mesh at joints of diff materials to the walls and columns in square plumb line and level including scraping and removing the existing neeru finish, hacking the surface of walls/columns. After levelling, the surfaces to be finished to receive paint etc. Rate to include providing for Al channels and grooves and wire mesh at all surfaces, junctions and corners. The POP punning to be carried out 100mm more than the finished ceiling level and not for the area above. (Sq.M) 16 Window Repairing Work Repairing and retrofitting of existing windows by providing and fixing wire mesh on the back surface of the window frame, including necessary cleaning, surface preparation, and securing the mesh with suitable fasteners to ensure stability and alignment. The mesh shall be of approved gauge and pattern as directed by the Engineer-in-Charge. After installation, the mesh and visible window components shall be painted with a high-quality gold finish paint to achieve a uniform decorative appearance. The rate shall include all materials, labour, tools, scaffolding, and equipment required for completing the work in all respects. Measurement shall be taken in square meters of the treated window surface. 17 Interior designing charges 18 Electrification Work : 19 The Flexi Grazer 2842-24V-48° Washer is a high performance linear LED fixture designed for indoor wall grazing applications. It operates at 24V DC, consumes 24W per meter, and delivers 1800K/2200K/2700K warm white light with a CRI of 97+ for exceptional color accuracy. Housed in a 20mm x 24mm aluminium profile with an integrated 48° lens diffuser, it offers focused beam control and a sleek finish. The system is flicker-free, dimmable (PWM, 0–10V, DALI, DMX), and outputs up to 2640 lumens/m with a lifespan over 50,000 hours. Rated IP20, it’s suitable for dry indoor environments and compliant with CE and RoHS standards.Makes: iGuzzini,Focus, BEGA, ERCO,Aldabra, Unilamp, Lighting Technologies, Lamp S.A.U, Griven, LEDFLEX, Flix, Disano, Simes, acdc Lighting. 20 Automation Casambi Keypad Xpress is a wireless user interface that can be configured via the Casambi app. The four target buttons can control a scene or an animation of the user"s choise or simply one luminaire, one luminaire group or all lamps together if sodesired (BLACK) 21 Automation Casambi Controller CBU-DCS is a Bluetooth controllable, Casambi enabled Sixty four channel CBU-DCS dimmer for constant voltage LED loads, such as LED strips and constant voltage LED modules. It is connected between a 12-24 VDC power supply and the constant voltage LED load.CBU-DCS64 can control up to Sixty four channels making it an ideal partner for RGBW and tunable white (TW) applications. The maximum combined output current is 250mA which can be freely divided between 1 - 64 channels. CBU-DCS64 is protected against overvoltage, overcurrent and short circuit situations. 22 Wall Lights Supply and installation of decorative wall lights with electroplated gold finish and high-quality optical-grade crystal elements, complete with high-efficiency LED lamp (8W–20W, 2700K–3000K warm white, CRI ≥ 80, PF > 0.9). Fixture shall be made of corrosion-resistant metal with integrated, flicker-free driver and suitable for wall mounting with concealed wiring. Includes all accessories, hardware, and installation up to the junction box. Approved makes:Tisva, Philips, Siemens, Ligman or equivalent, as approved by the Architect-in-Charge. Rate includes supply, transport, installation, testing, and commissioning. Measurement in numbers (each). 23 Chandelier SITC of customized chandelier model 015/60L with overall dimensions of 1480mm diameter and 2080mm height, constructed using high-grade aluminum frame, premium glass components, and K9 grade optical crystal elements in BAB (Black Antique Brass) finish. The chandelier shall be factory-finished with integrated 60 decorative light points (E14 or equivalent), compatible with LED retrofits or supplied with high-efficiency LED lamps. Fixture shall include all structural support accessories, hanging system, concealed wiring, and shall be suitable for secure suspension from RCC slab or ceiling frame as per site conditions. All materials used shall conform to relevant IS/IEC safety and electrical standards. Rate to include complete supply, transport, handling, installation, testing, and commissioning. Make and finish to be approved by the Architect-in-Charge. 24 Track Light Supply and installation of 10W Surface Mounted LED Revolving COB Downlight (Model: DL02-10128) with white aluminum body and gold reflector, suitable for indoor applications. The fixture shall have a wattage of 10W, delivering 100–110 lumens/W with an efficacy ≥85%. It shall emit warm white light (CCT: 3000K) with a beam angle of 24°, CRI >80, power factor ≥0.98, and THD <20%. The downlight shall have IP20 protection and feature a 360° revolving COB module using Evercore/CREE LEDs. Dimensions: 91mm (Dia) x 114mm (H); light element: 86mm (Dia) x 86mm (H). Weight: approx. 0.5 kg. Complete with mounting accessories, BIS/CE compliance (as applicable), and minimum 2-year warranty.
|
