Supply And Installation Of Spare Parts And Supply Of Raw Materials For Dejuri Bottling Plant Of Barjora Bloc ... in India

Work Detail

Supply And Installation Of Spare Parts And Supply Of Raw Materials For Dejuri Bottling Plant Of Barjora Block, Under Bankura Sadar Sub- Division Of Bankura Division, P.H.E. Dte.-1 Supply, delivery, installation and commissioning of 5000 Ltrs HDPE Water Tank. 2 Minilec SSP S1 VMR7 for chiller 3 Supply, delivery of Membrane element for RO unit, Capacity 2000 lit/hr. Suitable for installation in RO vessel diameter 8 " & length 40". as per following specification:- a)Permeate Flow: - Minimum 10000 gpd (3.75 m³ /d) b) salt Rejection :- (99.5% minimum) c) Configuration : - Spiral wound d) Membrane polymer:- Composite Polyamide e) Nominal membrane Area:- Minimum 365ft² (33.9m²) f) Maximum applied pressure:- above 450 psi g) Maximum operation temperature :- Not above 122°F (50°C) h) pH range, continuous (Cleaning) :- 2-11 (1-13)* i) Maximum Feed water Turbidity :- Upto 1.0 NTU j) Maximum Feed water SDI (15 mins) :- Upto 5.0 k) Maximum Feed Flow:- 75 GPM (17.0 m³ /h ) l) Minimum Ratio of Concentrate to permeate Flow any Element:- 5.1 m) Maximum pressure drop for Each Element:-10 psi (Make- Hydranautics /Dow/Toray/GE) 4 Installation and Commissioning of RO unit. Capacity 2000 lit/hr. suitable for RO vesel dameter 8" & length with through checking & testing complete. (Supplied by Departmentally) 5 UF unit for removing all undisclosed impurities including suspended solids, colidall impurities having Feed Pressure-5 Bar, Operating Tran membrane Pressure -2 psig, Maximum Backwash- 20 psig as per following specification:- a) Filtrate Flow- 12.1-29.5 gpm 2.7-6.7m³/hr) b) Filtrate Turbidity-≥00.7 NTU c)Virus removal-≥ 4 log d) Bacteria removal-≥ 4 log e) Configaration :- Capillary Ultrarafitration Module f) Membrane Polymar:- Hydrophilic Poly thersulfone g) Nominal Membrance Area :- 500 ft²(46m² ) or above h) Fiber Dimensions- ID 0.031" (0.8mm) OD 0.055" (1.4mm) i) Pore size:- 0.02 micron or less j) Typical Filtrate Flux Range:- 35-85 gfd (59-145l/m²/h) k) Maximum Applied Feed Pressure. 73 psig (5bar) l) Maximum Transmenibrane Pressure - 20psig (1.4 bar) m) Maximum backwash transtnembrance Pressure :-20 usig (1.4 bar) n) Instantaneous Chlorine Tolerance :- 100 ppm o) Instantaneous Hydrogen Peroxide Tolerance:- 200 ppm** p) maximum chlorine Expossure :-200.000ppm-hrs q) maximum instantaneous Feed Turbidity :- 100 NTU r) Maximum Operating Temperature:- 104° F s) pH operatin range:- 4.0-10.0 t) Clraning pH Range- 1.5-13.0 u) Operating Mode:-Inside to Outside Filtration Direct flow of Crossflow. 6 v) Backwash flux-100-150 gfd (170-255 l/m²/hr) w) Backwash Duration -30-60 seconds. x) Backwash Frequency-20-60 minutes. y) Chemical Enhanced Backwash Frequrncy-0-4 ties per day z) Chemical Enhanced Backwash Duration-1-30 minutes z1) Disinfection Chemicals -Na0CL, H₂o₂, CLO₂, or , NH₂CL z2) Cleani9ng Chemicals -NaOH, HCL, H₂SO₄, or Citric Acid (Make- Suez/Dow/Toray) 7 Installation and Commissioning of UF unit for removing all undissolved impurities including suspended solids, colidall impurities having Feed Prussure-5 Bar. . (Supplied by Departmentally) 8 Micron Cartridge Filter for RO Feed – 5 micon20” long (Jumbo Woundtype) (approved make) 9 Micron Cartridge Filter for after Ozone – 5 micon20” long (SlimWoundtype)( Approved make) 10 Micron Cartridge Filter after UV– 0. 1 micon20” long (Spun Cartridge) ( Approved make) 11 Micron Cartridge Filter– 0. 2 micon20” long (Pleated Cartridge) ( Approved make) 12 Supply and Delivery of Nylon Gripper 13 Supply and Delivery ofLevel Probe Sensor 14 Supply and Delivery ofPLC 15 Supply and Delivery ofPupdated HMI of Labeling Machine 16 Supply and Delivery ofSurvo Drive 17 Supply and Delivery ofSurvo Motor 18 Belt for lebelling machine 19 Supply and Delivery of Proximaty Sensor 20 Supply and Delivery of Main Motor Drive 21 Supply and Delivery ofpipe for chiller(500mm X 9mm) 22 Supply & delivery ofFesto solenoid valve MHF 5 1/4" with coil 23 Supply & delivery ofFesto solenoidMHF 3 1/8" with coil 24 Supply & delivery ofNorgren Make Spare Kit for P1 Valve 25 Supply & delivery ofNorgren Make Spare Kit for P2 Valve 26 Supply & delivery ofNorgren Make Spare Kit for Exhaust Valve 27 Supply & delivery of Pilot valve 3/2 NC 24 DC (for norgen) 28 Supply & delivery of Pilot valve 3/2 NO 24 DC (for norgen) 29 Supply and Delivery of festo Read Switch sensor 30 Supply and Delivery ofProximity Sensor PNP NO 31 Supply and Delivery of PU Pipe 6 mm 32 Supply and Delivery of PU Pipe 8 mm 33 Supply and Delivery of PU Pipe 10 mm 34 Supply and Delivery of PU Pipe 12 mm 35 Supply and Delivery of PU Pipe 16 mm 36 Polythylene Terephothalate (pet) Preform for 500 Ml Bottles (crystal Diamond finish) with 29/25 neck finish manufactured from Husky Injection moulding machine. 37 High density Polythylene Single Piece closure, slittled band remain on the bottle neck used for water application with 29mm three start neck finish of weight - 1.35 ± 0.10 Gms. 38 Natural LDPE multi-layer Shrink Film of 90 micron ± 10% thickness. Maximum weight of each roll will be 25 Kgs. 39 Ink cartridge for Batch code Machine 40 Make up for Batch Code Machine 41 Container of Cleaning Solution for Batch code Machine 42 100%BOPP Label gradefilm of thickness 38 microns ± 5% duly printed (design & colour as approved by PHED) for labeling 500 Ml pet bottles. 43 High quality transparent (Pressure sensitive ) hotmelt Adhesive for Labeling pet bottles (510 gms/packet) 44 Printing Roller for 500 Ml Bottle 45 NaOCL (100%) 46 SMBS (100%) 47 Antiscalant (100%) 48 (NaHCO3) (100%) 49 Biocide (Acurosil/Equivelnt) 50 Supply and delivery of21W 4ft, LED Tube Set (Make Phlips/ Havells/CG/other approved make) 51 Supply and delivery of Flood luminaries 50W, 220-240V, BVP 161 LED43/CW (Make Phlips/ Havells/CG/other approved make) 52 Supply, delivery, installation and commissioning of12" Exhaust Fan 53 Supply & delivery and Changed of PCB of Air Condition Machine. 54 Wet Service of 2 nos Air Condition Machine. 55 Gas Charging of 2 nos Air Condition Machine. 56 Inspection Charges of 2 nos Air Condition Machine

Contact Information