Tenders Are Invited For Request For Information: Purchasing Electric Mobile Shopper For Sortti Station As A ... in Finland

Work Detail

The Helsinki Region Environmental Services Municipal Association Charts Potential Providers In Connection With The Acquisition Of An Electric Crusher. This Is Not A Invitation To Tender, But A Request For Information. The Purpose Of This Request Is To Identify Market Players And Potential Providers. The Subscriber Is Acquiring One (1) New Or Little Used (May Be A Maximum Of One Year Old Device) Driven Electric Crusher As A Maintenance Leasing Service For One And A Half Years (1.5 Years). The Subscriber Then Has The Opportunity To Redeem That Device For Himself (Defined In More Detail In The Contract Phase). The New Electric Service Leasing Device Must Be Delivered In February 2026 Or If The Supplier Has A Little Used Electric Crusher As Defined In Specifications, This Delivery Is In August 2025. Finnterms 2001) The Maintenance Lease Must Cover All Periodic Maintenance And Fault Repairs To The Device For 1.5 Years. All Maintenance Is Done According To The Instructions Of The Equipment Manufacturer. Batteries Should Withstand At Least 8 Hours A Day At Least Spring, Summer And Autumn Conditions. Little Used Deployment Date And Serial Number) Driving Electric Mobile Crusher Service Laying For 1.5 Years The Device (Both New And Little Used) Must Meet All Minimum Lists Listed Below: -It Must Fit In A Height Of 6400 Cm Under The Canopy Device There Should Be Two Tires: Summer Tires +Winter Tires (Should Be Suitable For Difficult Winter Conditions) The Cabin Should Be Equipped With Heating. The Heating Must Be Sufficient To Heat The Cabin -25 Degrees Celsius To + 21 Degrees Celsius At Least -The Cab Must Have A 220V Plug And A At Least 1800W Inner Blower. Operation From The Same Connector From The Outside Of The Machine As Heating And Battery Charge. Connector Operating Location Ergonomic From The Earth -Class Battery Charger With Connector On The Outside Of The Machine. The Same Connector Also Occurs In Heating The Cab Cab, Etc., If The Windows Of The Technically Possible Cab Should Be Air -Suspension, With Electrical Height Adjustment Windows Must Have So -Called Cab Windows. Frosting. For Example, A Separate Webasto Cab Windshield Must Be Heated -The Cabin Space Of The Cab Must Be Air -Conditioned And The Cabin Temperature Should Be Below +22 Degrees Celsius. -In The Cab, There Must Be A Meter Panel, A Warning Light Or A Safety System, Which Shows, For Example, Possible Oil Leaks, Heat Rises, Etc. -The Glasses Must Be A Safety Glass And The Front Window Should Be Equipped With A Metal Safety Net With A Thickness Of At Least 2 Mm And At 30X30. -The Access Door Of The Cab Should Remain Open If Necessary. So Not Swinging During Use. -The Device Must Be Able To Crush Mixed Municipal Waste, Metal, Wood And Cardboard Roller -Above The Roller (50 Mm Above The Spikes, Beam Thickness 10 Mm) -The Device Must Have Automation In The Joints Where It Is Possible - So -Called. The Maintenance Hatch That, If Necessary, Can Be Checked Between The Bolts Tension Frame And The Cabin Must Have Sufficient Damping (Some Kind Of Airbag Solution) So That The Cabin Does Not Have A Small Heat Insulation, Eg Soundproofing. -The Electrical Motor Of The Device Must Be Intended For Heavy Use (2000 Hours/Year) -The Reversing Alarm Must Have An Orange Flap In Front, And At The Rear, In The Middle At About 0.5-1M. Road Transport Approval. Starts Automatically When The Machines Power Switches And Shuts Down When The Device Shuts Down. -The Device Must Have An Orange 360 ​​Degree Led Panel Lodge On The Roof. Road Transport Approval. Starts Automatically When The Machines Power Switches And Shuts Down When The Device Shuts Down. -The Device Must Have Led Driving And Front Roofing Lights. Min. Á 30W. -The Device Must Have Led Reversing Lights 2. Á 30W. Works Automatically With A Reversing Alarm. -The Device Must Have 2 Displays And A Heated Color Camera Surveillance System (2 Pieces Of At Least 7 Inch Displays). Installing The Front Camera High On The Mast So That The Crusher Roll Is About 100 Mm. The Rear Camera To Describe As Wide As Possible. It Starts Automatically When The Machines Power Switches And Shuts Down When The Device Shuts Down. Continuous Image When The Machine Is Running. -The Device Must Have A 6 Kg Powder Extinguisher In The Supporter Under The Steering Wheel, A Fixed, Two -Level Footrest, As Some Of The Jockeys Do Not Wear The Ground, But Have To Hang Them In The Air. Support Must Not Prevent Driving If The Driver Is Larger In Size And Shoes. Support Must Not Prevent Standing. User Lengths: 155-190Cm. -The Device Must Have A Ce Marking, Finnish-Language Manuals, And In The Cab In Finnish Using A Sustainable Text. For Example, Laser Engraved On Signs. -In Protection Rubber Around The Lifting Cylinder, The Color Of The Item Between The Cylinder Is Not The Color Of The Ral 5021 (Or The Bidder May Paint The Device With The Customers Color)

Contact Information