Tenders Are Invited For Miscellaneous Cleaning Machines - Buying A Multifunctional Metal Machine (New) For T ... in Bulgaria

Work Detail

Miscellaneous Cleaning Machines - Buying A Multifunctional Metal Machine (New) For The Needs Of Op Construction, Repair And Landscaping .. Buying A Multifunctional Metal Machine (New) For The Needs Of Op“ Construction, Repair And Landscaping ”. Technical Data Valid According To The Standard Din En 15429 Base Factory Novia Newly Produced After 01.01.2025. Basic Mark Base, Model Typical Approval According To The Eu For Registration Of A Base Machine Such As T2a (Lof) (Lof) 1. Biddle Maximum 1650 Mm 4. Machine Dimensions • Maximum Length 4550 Mm (Without Drawbar) • Maximum Width Of 1600 Mm (Without Side Mirrors) • Height Maximum 1980 Mm. (No Signal Lamp) 5. Engine • Diesel • Emissions Level - Minimum Corresponding To 2016/1628 Eg Stage V • Exhaust Gas Control - Via A Particulate Filter • Power Between -M 50 Kw - Max. 60 K W • Engine Volume - Min, 1900 - Max. 2000 Cm3 • Maximum Speed Of Movement At Movement - Min 40 Km/H • Maximum Operating Speed - Min. 24 Km/H • Maximum Speed Of Movement Back - Min. 12 Km/H 6. • Minimum Turning Angle Minimum -45 ° • Quicking Device For Attachments 9. Cabin • Single Safety Comfortable Cabin Corresponding To The Passive Safety Standard - Rops (Roll Over Protective Structures) • Two Doors, Glazed / Back / Steering - Central. Motor Hours • The Presence Of A Multifunction Display Showing The Operative Status Of The Machine With The Alert Minimum For: -The Statement Of The Battery, The Engine Temperature, The Engine Reciprocation, -Fuel Levels; 10. Hydraulic System • High -Assembly Two -Round Hydraulic System - Minimum 190Bar With Electrically Controlled Control Panel • Front Hydraulic Line - Minimum 50 L/Min; • Rear Hydraulic Line - Minimum 321/Min; 11. Electrical System • Voltage - 12 V • Battery - 12 V 85 Ah • Light Traffic Equipment On The Roads • Work Lights In Front • Warning Orange Light Type Jar 12. Air Conditioning • Air Conditioner 13. Front Lift • Capacity Of The Front Lift - Minimum Of 600 Kg. Shock Protected • Minimum - Two Brushes, Hydraulically Driven, Adjusting The Turning Rpm Of Brushes From The Cabin • Brushes Diameter - Minimum 900 Mm; 15. Suction Opening • Intake Suction Opening, Secured Against Shocks • Working Width - Minimum 550 Mm • Suction Channel - Minimum 180 Mm 16. Dust Control • Adjustable System With Water Tank For Brushes And In Suction Duct • Minimum Tank Capacity

Contact Information