|
Flexible Floor: Flexible Flexible Sports Sports External Measurements Between 250 Mm To 304Mm Wide X 250 Mm At 304 Mm Length X 11 Mm To 16 Mm Thick, Injected Into Interchangeable High-Impact Modular Plates With Antioxidant Additives (Ao) And Ultraviolet (Uv) And Tpe Rubber, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments, Pigments Colorful With High Solar Incides, Protecting Against Color Loss (Fading); Non -Slip Technology, Aids Traction; With Tpe Thermoplastic Rubber Cylindrical Pins, At Least 352 Pins And A Maximum Of 512 Cylindrical Pins In Thermoplastic Rubber Tpe Per Square Meter For Damping, With High Impact Absorption, Protecting The Lesion Joints; Male And Female Fitting Technology, With Dilation Joint, Which Maintains The Integrity Of Leveling At Any Climate. Anti -First Plates System By Hidden Screws, With At Least 2 (Two) And Maximum 4 (Four) Per Plate, Avoiding Removal Of Plates In Public Areas. Structural Base Comtechnology For Water Flow And Air Circulation, Reducing Water Ticking And Moisture Retention On The Floor, Rampaespecification: Lateral Ramp- Lateral Finish, For External And Internal Sports Modular Floor, The Ramp Should Be Made Of High-Impact Polypropylene With Antioxidant Additives (Ao) And Ultraviolet (Uv), With Pine Cushion System Of Tpe Rubber, Containing At Least 8 (Eight) Damping Pins Properly Coupled In The Structure, With A Minimum Width Of 30Mm At Most 50Mm, The Length Should Be Compatible With The Floor Technology For Hidden Screws, With At Least 1 (One) Hidden Screw And Maximum 2 (Two) Per Ramp In Public Areas. 90º Sneebon, Made Of High-Impact Polypropylene With Ntioxidant (Ao) And Ultraviolet (Uv) Additives, Tpe Rubber System, Containing At Least 02 (Two) Damping Pins. Should Be Made Of High Impact Polypropylene With Antioxidant (Ao) And Ultraviolet (Uv) Additives; Overlapping The Module, Its Function Will Be To Cover The Span Between The Module And The Wall, Allowing The Natural Movement Of Dilation And Module Contraction, For A Better Visual Result And To Avoid Access To The Side Ends Of The Modules, Protecting From Inadequate Disassembly; Measurements Between 250 Mm To 304 Mm In Length X 40 Mm To 60 Mm Wide X 9 Mm To 20 Mm Thick, With Hidden Screw Fixation System, Fastened With Buses, At Least 02 (Two) And A Maximum Of 03 (Three), With Male And Female Fit Between The Parts, Providing Stability In The Fitting. 05/19/2025
|
