|
Pipe Du32mm Pipe Gas Pipeline D 32Mm Wall Thickness 3 Mm, Crane Du25 Kran Ball Diameter 25Mm. Inner-Worship Thread. The Shutter Is A Lever-Butterfly., The Coupling Is The Internal Steel Du 20Mm. Direct Steel Couplings With Cylindrical Threads Are Used To Connect Water And Gas Pipes, Using The Sealant, In Heating Systems, Water Supply, Gas Pipeline And Other Systems Operating In Conditions Of Non -Aggressive Media (Water, Saturated Water Vapor, Combustible Gas, Etc.) At The Temperature Of The Conduct Of Not Higher Than 175 ° C And Pressure P = 1.6 Mpa. Type Of Thread 3/4, The T20mm Plug Plug With An External Thread 3/4 ”Ctm Is Made Of Hot -Propressed Brass And Has An Octagonal Head. It Is Used To Close The Pipe In Water Supply And Heating Systems, Air Ducts And Gas Pipelines. The Octagonal Shape Of The Plug Is Suitable For Any Keys, Which Facilitates Its Installation. Material: Brass With A Nickelled Coating Thread: External, Rethagaykad 20Mm Cast -Iron Counter -Yoke Of Black 3/4 Inch Prevents Spontaneous Promotion Of Pipeline Sections During Vibration, Temperature Differences. Fitting With A Reverse Threaded Connection Significantly Increases The Tightness Of The Pipes, Knu Du 20Mm3/4 Flood Ball Diameter 3/4 Or 20Mm. Inner-Worship Thread. The Shutter Is A Black Butter., The Plug On The Riser Du25mm Plug With Outdoor Threads Of The 25Mm Ctm Diameter Is Made Of Hot -Propressed Brass And Has An Octagonal Head. It Is Used To Close The Pipe In Water Supply And Heating Systems, Air Ducts And Gas Pipelines. The Octagonal Shape Of The Plug Is Suitable For Any Keys, Which Facilitates Its Installation. Material: Brass With A Nickelled Coating Thread: External, Maevsky Crane. A Device For The Release Of Air From The Radiators Of Central Water Heating, Opened Using A Special Key Or Screwdriver., Manometer Manometer Radial Mt-100 0.6 Mpa (Pipe Thread), The Tee With The Internal Thread Du20mm Tee 3/4 ”G/G/Ctm With Internal Threads - Three -Way Threaded Fitting. Designed For Connecting Parts Of The Pipeline. The Tee Is Made Of High -Quality Hot -Propressed Brass., The 80 Mm Flange Flange Serves For A Durable And Sealed Connection Of Pipes, Pipeline Reinforcement, Etc. It Has Uniform And Control Openings For Bolts Or Studs. Material: Steel., Drive Du15mm Pogon - A Piece Of Pipe With A Thread On Both Sides. It Is Used To Connect Two Fixed Sections Of The Pipeline. On The One Hand, The Thread Is Longer Than On The Other Side. This Connecting Part Is Most Often Used In Laying Water Pipelines. Type Of Thread 1/2, Ball Valve (Valve) Du80 Mm, Ru 1.6 Mpa, Flange, Pipe Du 20Mm Pipe Gas Pipeline D 3/4 Wall Thickness 3 Mm, Steel Du25mm Coupling Steel Straight Lines With Cylindrical Threads Are Used To Connect Water And Gas Pipes, Using A Seal, In Heating Systems, Water Supply, Gas Pipeline And Other Systems Of Non -Aggressive Media (Water, Saturated Water Vapor, Combustible Gas, Etc.) At A Temperature Of The Conduct Of Not Higher Than 175 ° C And Pressure P = 1.6 Mpa. Du -25 Mm, Lena Plumbing Linen Plumbing Is An Environmentally Friendly Material, Which Is Used To Compact Threaded Connections In Heating And Water Supply Systems., 3/4 Steel Threads Is A Non -Waste Part Of The Pipeline. On The One Hand, It Joins The Pipe Using Welding, On The Other Hand It Has A Short Thread Diam 3/4, 1/2 Steel Thread Thread Is A Non -Waste Part Of The Pipeline. On The One Hand, It Joins The Pipe Using Welding, On The Other Hand It Has A Short Thread Diam 1/2, Pipe Du76mm Pipe Gas Pipeline D 76Mm Wall Thickness 3.5Mm, Poping3/4 Log - A Segment Of Pipe With A Thread On Both Sides. It Is Used To Connect Two Fixed Sections Of The Pipeline. On The One Hand, The Thread Is Longer Than On The Other Side. This Connecting Part Is Most Often Used In Laying Water Pipelines. Type Of Thread 3/4
|
