Tender For Regarding Inviting The Rates Of Various Items For Small Repair Works To Be Done Within The Munici ... in India

Work Detail

Tender For Regarding Inviting The Rates Of Various Items For Small Repair Works To Be Done Within The Municipal Corporation Mathura Vrindavan Limits. - Demolishing cement concrete manually including disposal of material withing 50 metres lead ( Ch.17 Page No.50 SI.No.1 DSR Specification No.15.2,15.2.1 PWD SOR 2023-24) 2 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable matrial within 50 metres lead as per direction of engineer - in - charge.( Ch.17 Page No.50 SI.No.2 DSR Specification No.15.3 PWD SOR 2023-24) 3 Demolishing Brick work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable matrial within 50 metres lead as per direction of engineer - in - charge.( Ch.17 Page No.50 SI.No.6 DSR Specification No.15.7.4 PWD SOR 2023-24) 4 Dismantlling lnterlocking tiles tiles work in floors/Roads lald in dry sand including stacking with 50 metre lead for thicknessof tile 60mm to 80mm ( Ch.17 Page No.51 SI.No.22 PWD SOR 2023-24) 5 E/W in Excavation in foundation in ordinary soil (loam, clay or sand) including lift up to 1.50 mtr and lead up to 30 mtr and including filling watering and ramming of excavated earth in to the trenches or in to the space b/w the building and the side of foundation trenches or in to the and removal and disposal of surplus earth as directed by the engineer incharge up to a distance of 30 mtr from the foundation trenches.(CH. NO. 4, PAGE NO. 17 SI NO. 1, 251,PWD SOR 2023-24) 6 E/W in filling or in cutting in ordinary soil with 8 km cartage including supply of all materials, labour and T & P etc. required for propper completion of the work.(RATE ANALYSIS) 7 Sand filling in plinth including supply of necessary quantity of local sand from a distance not exceeding 8 Kms from the site of work and including watering dressing etc. required for proper completion of work. (CH. NO. 4, PAGE NO. 17 SI NO. 6 PWD SOR 2023-24) 8 Cleaning Jungles including uprooting of trunk vegetation grass, bushes, wood trees and sapling of girth upto 30cm measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50 meters out side the periphery of areacleared. (CH. NO. 4, PAGE NO. 17 SI NO. 7 PWD SOR 2023-24) 9 P/L C.C. in 1:5:10 (1 cement: 5 corse sand: 10 graded stone aggregated 40 mm nominal size) and curing complete, including cost of form work. In foundation and floors.(CH. NO. 5, PAGE NO. 18 SI NO. 1 (4.1) 4.1.10, PWD SOR 2023-24) 10 Providing and Laying spreading & compacting of granular sub-base (GSB)by providing coarse graded (Gr-1) materials form approved quarry. Spreading................etc including all complete.as directed by Engineer incharge. (RATE ANALYSIS) 11 Class M-150 (Non Modular) B/W in 1:4 cement and fine sand motar in foundation and plinth including supply of all materials, labour and T & P etc. required for propper completion of the work.(CH. NO. 6, PAGE NO. 20 SI NO. 3, 6.1 , 6.1.1 A, PWD SOR 2023-24) 12 Class M-150 (Non Modular) B/W in 1:4 cement and fine sand motar in Super structure above plinth level upto floor five level including supply of all materials, labour and T & P etc. required for propper completion of the work.(CH. NO. 6, PAGE NO. 20 SI NO. (3+5), (6.1.1 A+6.8 A), PWD SOR 2023-24) 13 6mm Celling plaster 1:3 (1 cement : 3 fine sand) cement & fine sand in F.lvl. not less than 1.25, 1:3 including chiping of RCC surface before ceiling plaster. The cost ofincluding all material, labour T&P and scafolding etc.(CH. NO. 13, PAGE NO. 42 SI NO. 13, PWD SOR 2023-24) 14 12 mm Cement Plaster with cement motar in proportion of 1:4 cement & fine sand (not less than in 1.25 FM) of single coat for interior plastering up to floor to level including internal rounded angles chamfers, and rounded angles not exceeding 80 mm. In girth and finished even and smooth.(CH. NO. 13, PAGE NO. 41 SI NO. 3, 13.1, 13.1.1, PWD SOR 2023-24) 15 P/L C.C. in 1:2:4 (1 Cement: 2 coarse sand : 4 graded stone aggregrate 20 mm nominal size) and curing complete, including cost of formwork in foundation and floor.(CH. NO. 5, PAGE NO. 18 SI NO. 6 (4.1), 4.1.3, PWD SOR 2023-24) 16 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying and including the cost of centering, shuttering, finishing but excluding reinforcement, including admixtures in recommended proporlions as per lS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge.( Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable / recoverable separately). Allwork up to Plinth level. (CH. NO. 5, PAGE NO. 19SI NO. 16 PWD SOR 2023-24) 17 All works above plinth level upto floor V level. 18 Reinforced cement concrete work Providing and laying in position spacified grade of reinforcement cement concrete, slab including the cost centering, shuttering, finishing and excluding reinforcement- All work upto plinth level: 1:1.5:3 (1 Cement: 1.5 Corse sand : 3 Stone grits with 20 mm nominal size) (CH. NO. 5, PAGE NO. 18 SI NO. 9, 5.1, 5.1.2, PWD SOR 2023-24) 19 RCC work Providing and laying in position specified grade of reinforced cement concrete,Slab including the cost of centering, shutterang, finishing and excluding reinforcement - Above plinth level upto fifth floor lable : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone. (CH. NO. 5, PAGE NO. 19 SI NO. 10, PWD SOR 2023-24) 20 Steel reinforcement of R.C.C work including straightening, cutting, bending, placing in position and binding all complete.(RATE ANALYSIS) 21 Supply & laying of I shped (Zigzag) precast interlocking tiles of thickness 60 to 100 mm (Compressive strength not less then 30 Mpa and weight 4.5kg) including 25mm thick local sand base leveling and dressing of surfase to required level and slope ,filling joints with local sand all complete work.(CH. NO. 20, PAGE NO. 56 SI NO. 17, PWD SOR 2023-24)60 mm (Rubber molded Grey) 22 60 mm (Rubber molded coloured) 23 80 mm (Rubber molded Grey) 24 80 mm (Rubber moldedcoloured) 25 100 mm (Rubber molded Grey) 26 100 mm (Rubber moldedcoloured) 27 Relaying of I shaped(Zigzag) precast interlocking tiles……..etc including all complete work. 28 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steels etc. as required. 29 Class M-150 (Non Modular) B/W in 1:6 cement and coarse sand motar in foundation and plinth including supply of all materials, labour and T & P etc. required for propper completion of the work.(CH. NO. 6, PAGE NO. 20 SI NO. 1, 6.1 , 6.1.2 , PWD SOR 2023-24) 30 Class M-150 (Non Modular) B/W in 1:6 cement and coarse sand motar in Super structure above plinth level upto floor five level including supply of all materials, labour and T & P etc. required for propper completion of the work.(CH. NO. 6, PAGE NO. 20 SI NO. (1+5), (6.1+6.8) , (6.1.2+6.8 A) , PWD SOR 2023-24) 31 Repairing of Plaster of thickness 12mm to 20mm in patches of area 2.5 Sq.m and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all completion of work.(Ch.13 Page No.42 SI.No.20 DSR Specification No.14.1,14.1.1 PWD SOR 2023-24) with cement mortar 1:4 (1 cement : 4 fine sand). 32 Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 Ltr/10sqm over and including priming coat of exteriar primer applied @ 2.20kg/10sqm supply of all material, labour, T&P, etc. required for proper completion of work for two coat. (Ch.15 Page No.46 SI.No.4 DSR Specification No.13.45,13.45.1 PWD SOR 2023-24) 33 Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. Including curing the cost of all material, labour, T&P etc. complete.(Ch.15 Page No.46 SI.No.1 DSR Specification No.13.26,13.26 PWD SOR 2023-24) 34 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work including cost of all materials, supply of all material, labour, T&P, etc.(Ch.15 Page No.47 SI.No.14 DSR Specification No.13.61,13.61.1 PWD SOR 2023-24) 35 Providing Artistic painting with single colour or multicolour on tera kota painted surface including all materials. 36 Finishing wall with water proofing cement paint Required shade : New work ( two or more coats applied @ 3.84kg/10Sqm), supply of all material, labour, T&P, etc.(Ch.15 Page No.46 SI.No.3 DSR Specification No.13.44,13.44.1 PWD SOR 2023-24) 37 Painting two coat over priming coat apex all complete work. 38 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/l0 sqm over an under coat of primer applled @ O.B0 ltr/10 sqm of approved brand and manufacture. supply of all labour material and T&P required for proper completion of work.(Ch.15 Page No.46 SI.No.6 PWD SOR 2023-24) 39 Removing dry or oil bound dislemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (Ch.15 Page No.48 SI.No.28 PWD SOR 2023-24) 40 Artistic painting on walls with multicolour enamel paint etc all complete work. 41 12 mm thick plaster in 1:6 cement and coarse sand mortar including supply of all materials, labaour, t&p, etc. required for proper completion of the work (P.W.D. SI. No. 582(11)) 42 20 mm thick cement plaster in two coats backing cost 17 mm and finishing col 3mm thick of neat cement complete (P.W.D. SI. NO. 590(1) ) 43 White washing 3 coats including supply of all material, labaour, t&p, etc. complete. (Ch.16 Page No.49 SI.No.2 DSR Specification No.13.37, PWD SOR 2023-24) 44 Distempering 2 coat of oil bound distemper including a priming coat of primer complete (Ch.15 Page No.46 SI.No.2 DSR Specification No.13.41.1, PWD SOR 2023-24) 45 B.O.E. payment with M150 class bricks laid on edge and dry joint filled with local sand complete.(Ch.14 Page No.43 SI.No.1 DSR Specification No.11.1.1, PWD SOR 2023-24) 46 Dismentling of flexible pavement and disposal of dismantle material upto a lead of 50 meters, stacking serviceable and unserviceable materials separately.(Ch.17 Page No.51 SI.No.22 DSR Specification No.New, PWD SOR 2023-24) 47 Dismentling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-In-Charge within a distance of 50 meters (200 feet) (Ch.17 Page No.50 SI.No.6 DSR Specification No.15.7.4, PWD SOR 2023-24) 48 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (Ch.17 Page No.50 SI.No.2 PWD SOR 2023-24) 49 Dismantling existing plaster including disposal of refuse as directed by Engineer-In-Charge within a distance of 50 meters.(Ch.17 Page No.51 SI.No.21 DSR Specification No.15.56, PWD SOR 2023-24) 50 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessory repairs to scratches etc. complete.(Ch.16 Page No.49 SI.No.6 DSR Specification No.13.88, PWD SOR 2023-24) 51 Deduct cost of serviceable bricks available at sites (due to used old bricks available at site) (Ch.1 Page No.7 SI.No.1 DSR Specification No.1.1.1, PWD SOR 2023-24) 52 Deduct cost of brick bats O.B.B./150B.B. (Ch.1 Page No.7 SI.No.2 DSR Specification No.1.2, PWD SOR 2023-24) 53 Supply and Laying of 600 mm dia R.C.C. hume pipe NP-4 with collar etc. including cartage of pipers, collars etc. complete. (Ch.20 Page No.55 SI.No.11 DSR Specification New, PWD SOR 2023-24) 54 Supply and Laying of 350 mm dia R.C.C. hume pipe NP-4 with collar etc. including cartage of pipers, collars etc. complete. (Ch.20 Page No.55 SI.No.11 DSR Specification New, PWD SOR 2023-24) 55 Supply and fixing of flush doors 30mm Thick, commercial quality conferming of I.S. 2202 part-1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplied departmentally. (Ch.9 Page No.25 SI.No.1 DSR Specification No.9.21.2, PWD SOR 2023-24) 56 Providing & Fixing 1.00mm thick decorative high pressure laminated sheet of plain/wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type s, including cost of adhesive of approved quality. (Ch.9 Page No.26 SI.No.6 DSR Specification No.9.127,9.127.2, PWD SOR 2023-24) 57 Providing corrugated G.S. sheet 1.00 mm thick including verical/curved surface fixed with polymer coated J of L books, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers of with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.(Ch.11 Page No.34 SI.No.3 DSR Specification No.12.1,12.1.1, PWD SOR 2023-24) 58 Supply of fixing 6mm (1/4"") thick china white glazed tile in flooring or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement jointed and polishing complete including supply of all materials, labaour for proper completion of the work. (Ch.14 Page No.44 SI.No.19 DSR Specification No.11.37A, PWD SOR 2023-24) 59 Providing and laying Vitrified tiles in floor with water absorption less than 0.8% and conforming to IS. 15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high plymer modified quick set tile adhesive (water based) condorming to I.S. : 15477, including grouting of joints.(500mmX500mm) (Ch.14 Page No.44 SI.No.20 DSR Specification No.11.41.1, PWD SOR 2023-24) 60 Chequrred precast cement concrete tiles 22mm thick in footpath & courtyard, joined with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 22mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). (Ch.14 Page No.43 SI.No.8 DSR Specification No.11.20.1A, PWD SOR 2023-24) 61 Supply and hoisting of sintex or equlvalent high density polyethlene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent,(Ch.19 Page No.53 SI.No.2 DSR Specification No.18.48, PWD SOR 2023-24) 62 Red sand stone work for wall lining etc. (veneer work) 30mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) including camping jointing in white cement mortar 1:2 ( 1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade.(Ch.18 Page No.52 SI.No.7 DSR Specification No.8.14,8.14.1.5, PWD SOR 2023-24) 63 Providing and fixing water closet formatting pan (odisha type w.c. pan) with 100mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern, including flush pipe, manually controlled device (handle level) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : white Virteous China Orissa pattern W.C. pan of size 580x440 mm with integgral type foot rests.(Ch.24 Page No.70 SI.No.1 DSR Specification No.17.1,17.1.1, PWD SOR 2023-24) 64 Providing and fixing white vitreous china pedestal type water closet (European type w.c. pan) with seat and lid 10 litre low level white P.V.C. flushing cistern, inbluding flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with ISI marked white solid plastic seat and lid. (Ch.24 Page No.70 SI.No.2 DSR Specification No.17.2.1 PWD SOR 2023-24) 65 White Vitreous China Washbasin size 630x450 mm with a single 15mm C.P. brass pillar tap. (Ch.22 Page No.64 SI.No.65 DSR Specification No.17.25.1 PWD SOR 2023-24) 66 Providing and fixing white vitreous china flat back or wall corner type ripped front urinal basin of 430x260x350 mm or 340x410x265 mm size respectively. (Ch.24 Page No.70 SI.No.3 DSR Specification No.17.4,17.4.1 PWD SOR 2023-24) 67 Providing and fixing white vitreous china squatting plate urinal with integal rimlongitudinal flush pipe (Ch.24 Page No.70 SI.No.4 DSR Specification No.17.6,17.6.1 PWD SOR 2023-24) 68 Providing and fixing G.I. 15 mm dia nominal bore pipes complete with G.I. fittings including making good the walls etc. concealed pipe complete. (Ch.23 Page No.67 SI.No.15A DSR Specification No.18.46.1 PWD SOR 2023-24) 69 Providing and fixing G.I. 20mm dia nominal bore pipe complete with G.I. fittings including making good the walls etc. concealed pipe complete.(Ch.22 Page No.64 SI.No.15B DSR Specification No.18.46.2 PWD SOR 2023-24) 70 Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931. (Ch.23 Page No.68 SI.No.19 DSR Specification No.18.49.1 PWD SOR 2023-24) 71 Providing and fixing PVC 75mm diameter pipe conforming to IS make working pressure 6 kg/sq Cm including testing labour T&P and all complete fittings. (Ch.23 Page No.69 SI.No.30A PWD SOR 2023-24) 72 providing and fixing PVC 90mm diameter pipe conforming to IS make working pressure 6 kg/sqCm including testing labour T&P and all complete fittings.(Ch.23 Page No.69 SI.No.30B PWD SOR 2023-24) 73 Providing and fixing PVC 110mm diameter pipe conforming to IS make working pressure 6 kg/sqCm including testing labour T&P and all complete fittings (Ch.23 Page No.69 SI.No.30C PWD SOR 2023-24) 74 Providing and fixing 140mm diameter pipe conforming to Is make working pressure 6kg/sqCm including testing labour T&P and all complete fittings (Ch.23 Page No.69 SI.No.30D PWD SOR 2023-24) 75 Providing of fixing chlorihated polyvinyl chloride (CPVC) pipe 15 mm nominal outer dia pipes including jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting and making good the same. etc all complete work. (Ch.23 Page No.65 SI.No.A DSR Specification No.18.8.1 PWD SOR 2023-24) 76 Providing of fixing chlorihated polyvinyl chloride (CPVC) pipe 20 mm nominal outer dia pipes including jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting and making good the same. etc all complete work. (Ch.23 Page No.65 SI.No.B DSR Specification No.18.8.2 PWD SOR 2023-24) 77 Providing of fixing chlorihated polyvinyl chloride (CPVC) pipe 25 mm nominal outer dia pipesincluding jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting and making good the same. etc all complete work.(Ch.23 Page No.65 SI.No.C DSR Specification No.18.8.3 PWD SOR 2023-24) 78 Providing of fixing chlorihated polyvinyl chloride (CPVC) pipe 32 mm nominal outer dia pipes including jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting and making good the same. etc all complete work. (Ch.23 Page No.65 SI.No.D DSR Specification No.18.8.4 PWD SOR 2023-24) 79 P/L Dam proof course 40mm thick with cement concrete 1:2:4. (Ch.7 Page No.22 SI.No.4.10 DSR Specification No.4.10(808) PWD SOR 2023-24) 80 P/L Dam proof course 25mm thick with cement concrete 1:2:4. (Ch.7 Page No.22 SI.No.4.10 DSR Specification No.4.10 A (808) PWD SOR 2023-24) 81 Antitermite treatment of along extarnal wall is not provided using camical emulsion @ 7.5 litre.(Ch.8 Page No.23 SI.No.6 DSR Specification No.2.35.1.1 (808) PWD SOR 2023-24) 82 Providing and fixing in position collapsible steel shutters with vertical channels 20X10X2 mm and braced with flate iron diagonals 20X5 mm size, with top and bottom rail of T-iron 40X40X6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangment, including all complete work.(Ch.10 Page No.30 SI.No.4 DSR Specification No.10.3PWD SOR 2023-24) 83 Providing and Fixing 1.2 metres high GI barbed wire fencing with 1.8 m Angle iron posts 40 mm X 40 mm X 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, .6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only and provided with 9 horizontal lines and 2 with GI staples, turn buckles etc. complete as per clause 817 as per direction .(Ch.26 Page No.77 SI.No.8.17 DSR Specification No.8.17 (808) PWD SOR 2023-24) 84 S/L of 22.4-53 mm size stone ballast including all completion of work.(Ch.1 Page No.7 SI.No.3(D) DSR Specification No.3(D) B PWD SOR 2023-24) 85 Painting letters upto 2.5cm size completeincluding supply of all items, labour andmaterials and T&P etc. (Ch.26 Page No.76 SI.No.1 PWD SOR 2023-24) 86 Above 2.5cm upto 8cm 87 Above 8cm upto 15cm 88 Cast-ln-Situ Cement Concreto M 20 KerbConstruction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-"10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete tad manually, alt complete as per Clause 408. (Ch.28 Page No.83 SI.No.17 PWD SOR 2023-24) 89 Road Marking with Hot Applied Thermoplastic Compound with Reflectorislng Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick lncluding reflectorising glass beads 0? 250 grns per sqm area, thickness of 2.5 mm is excluslve of surface applied glass beads as per lRCi35-20"15 The finished surface to be level. un form and free from slreaks and holes. (Ch.28 Page No.79 SI.No.2 PWD SOR 2023-24) 90 Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply and flxing of raised pavement marker with Made of Plastic body of RPIMi Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrile) or HIPS (High-lmpact Polystyrene) or Acryloniilrile Butadien Styrene (ABS) or Any other suitable malerial approved by the Engineer. RPM (with out shank)(Ch.28 Page No.80 SI.No.5 PWD SOR 2023-24) 91 providing and fixing baricating of different place mathura city of including ballies with GI Seat and nail etc all comp 92 Rising of manhole including of all compound 93 Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrandsingle core copper conductor cable in heavy guage rigid steel conduit pipe on surface, complete with 14 SWG copper earthcontinuitywire,GP Box ,pianotype switchand ceiling rose/angle/ batten holder on3mm. thickphenolic laminated backelite sheet etc. complete in all respect, as directed .SI.NO.(121B) SOR 2018 94 Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5sq.mm.FRLSH PVC insulated multistrand single core copperconductor cableinheavyguagerigidsteel conduit pipe on surface complete with 14SWGcopper earth continuity wire,piano type switch & ceiling rose on 3 mm. thickphenolic laminated backelite sheet etc, complete in all respect. SI.NO.(123B) SOR 2018 95 Wiring Point for plug with 1.5 sq. mm.FRLSH PVCinsulated multistrand single core copper conductorcablein heavyguagerigid steelconduitpipe on surface,complete with 14 SWG copperearth continuitywire , GP Boxandpianotypeswitch and socket etc. complete in all respect. SI.NO.(124B) SOR 2018 96 Wiring point for exhaustfan with 1.5 sq. mm.FRLSH PVC insulatedmultistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface complete with14 SWG copper earth continuity wire,15 A piano type switch & ceiling rose on 3 mm.thick phenolic laminated backelite sheet etc, complete in all respect. SI.NO.(127B) SOR 2018 97 S&F of 0.5 Amp to 5 Amp. SP MCB (10KA) C Curve CAT B item 1001 98 Supply and fixing of fan hook fabricated from M.S. rod for ceiling fan each.item 1123 99 Supply and fixing of cross clamp of required size fabricated from 50mm x 12mm M.S. flat complete with fan hook including painting etc. complete in all respect.item 1124 100 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,. i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (Ch.10 Page No.33 SI.No.19 PWD SOR 2023-24) 101 Mistri/Mason first class 102 Welder 103 Beldar/chaukidar 104 Mazdoor/coolie 105 Two donkey with driver 106 Tractor trolly with driver including P.O.L 107 Tractor with water tanker with driver including fuel and cost of water 108 J.C.B machine with driver including P.O.L 109 Class M-150 110 Brick ballast 40mm Gauge 111 FIy ash Brick (Specification/Strength should not be less than bricks - M-50) 230mmx110mmx75mm 112 Grey 80 mm thick 113 Rubber mould Grey 80 mm thick 114 Coloured Rubber moulded 80 mm thick 115 Rubber mould Grey 100 mm thick 116 Coloured Rubber moulded 100 mm thick 117 Size 12"x12" x6" Rubber Moulded Cement concrete Kerb stone M-20 118 Size 12"x 18" x6" Rubber Moulded Cement concrete Kerb stone M-20 119 For Agra & Mathura District COARSE SAND (Excluding Actual Bulkage) 120 Local Sand COARSE SAND (Excluding Actual Bulkage) 121 Portland Cement (J.P., A.C.C., Birla, J.K.) O.P.C. 122 White Cement (J.K. or Birla Brand) 123 MS ANGLE, CHANNEL, TEE, SHEET, PIPE, FLAY, RS. JOINTS ETC. 124 Cost of earth 125 5mm thickPLAIN GLASS (Best Quality, Cut to Size) 126 4mm thickPLAIN GLASS (Best Quality, Cut to Size) 127 25mm wide 4mm thickGLASS STRIPS 128 40mm wide, 4mm thickGLASS STRIPS 129 From Maihyer LIME 130 Katni LIME 131 300mm x 450mm size - White GLAZED TILES (1"t Quality l.S.l. Marked or equivalent) Thickness 6mm 132 300mm x 450mm size- Coloured GLAZED TILES (1"t Quality l.S.l. Marked or equivalent) Thickness 6mm 133 Marble white Alebeta 18mm thick, (60cm x 60cm Size) 134 Marble white Dhungri 18mm thick, (60cm x 60cm Size) 135 Marble white Adanga 18mm thick, (60cm x 60cm Size) 136 Black Granite (Polished) in big slab 18mm thick 137 Kotastone of ASl (K) 16 to 24mm thick 138 Kota stone of ASI (K) 25 to 40mm thick 139 Baroda green 20mm thick, (60cm x 60cm Size) 140 For Floor size 300 x 300mm- White BELL/KAJARIA TILES/ROMANO SOMANY, ORIENT, ASIAN TILES/ JHONSON (White Cloudy - ordinary colours) 141 For Wall-size 200 x 300mm - Coloured BELL/KAJARIA TILES/ROMANO SOMANY, ORIENT, ASIAN TILES/ JHONSON (White Cloudy - ordinary colours) 142 Vitrified Tiles 600 x 600mm 10mm thickBELL/KAJARIA TILES/ROMANO SOMANY, ORIENT, ASIAN TILES/ JHONSON (White Cloudy - ordinary colours) 143 For Floor size 300 x 300mm- White (Anti Skid Tiles) BELL/KAJARIA TILES/ROMANO SOMANY, ORIENT, ASIAN TILES/ JHONSON (White Cloudy - ordinary colours) 144 Vitrified Tiles 600 x 600mm (Anti Skid Tiles) 10mm thick BELL/KAJARIA TILES/ROMANO SOMANY, ORIENT, ASIAN TILES/ JHONSON (White Cloudy - ordinary colours) 145 (I) 10mm dia 80mm longI.S.I. Marked Aluminum Tower Bolt (with fixers) 146 (II) 10mm dia 100mm longI.S.I. Marked Aluminum Tower Bolt (with fixers) 147 (III) 10mm dia 150mm longI.S.I. Marked Aluminum Tower Bolt (with fixers) 148 (IV) 10mm dia 200mm longI.S.I. Marked Aluminum Tower Bolt (with fixers) 149 (V) 10mm dia 300mm longI.S.I. Marked Aluminum Tower Bolt (with fixers) 150 (I) Bolt 16mm dia 20mm long I.S.I. Marked Aluminum Sliding Bolt with nuts & bolts. 151 (II) Bolt 16mm dia 250mm long I.S.I. Marked Aluminum Sliding Bolt with nuts & bolts. 152 (III) Bolt 16mm dia 300mm long I.S.I. Marked Aluminum Sliding Bolt with nuts & bolts. 153 (I) 100 mm long I.S.I. Marked Aluminum door Handle 154 (II) 125mm long I.S.I. Marked Aluminum door Handle 155 Aluminum Door Stoppers 156 (a) Steel Tower Bolt with 10mm dia rod & screw 100mm long. Steel 304 (Gauge Fitting ISI marked only) 157 (b) Steel door handles with screw 125mm long. Steel 304 (Gauge Fitting ISI marked only) 158 (a) I.S.I. Marked Iron Hinges 50mm long MISC. FITTINGS 159 (b) I.S.I. Marked Iron Hinges 63mm long MISC. FITTINGS 160 (c ) I.S.I. Marked Iron Hinges 75mm long MISC. FITTINGS 161 (d) I.S.I. Marked Iron Hinges 100mm long MISC. FITTINGS 162 (e) I.S.I. Marked Iron Hinges 125mm long MISC. FITTINGS 163 (f) I.S.I. Marked Iron Hinges 150mm long MISC. FITTINGS 164 (a) white Oil Bound Distemper (Oil paste of best quality viz, Asian, Burger, J&N 165 (b) coloured Oil Bound Distemper (Oil paste of best quality viz, Asian, Burger, J&N 166 Lead White (Safeda) 167 Paints Synthethic Enamel (Superior Quality viz Asian, Burger, equivalent) 168 Primer (for Wood) 169 Primer (RedOxide) (for Metal) 170 Exterior Emulsion Pant(Apex) 171 Water Proof Cement Paint 172 MS binding wire 20 gaugeIRON SHEETS 173 (i) Welded mesh 1" x 2" size of 10 gauge wire MESHES 174 (ii) Welded mesh 1" x 3" size of 10 gauge Wire MESHES 175 (iii) Welded mesh 2" x 2" size of 10 gauge Wire MESHES 176 (iv) Murga Jali 1/2" x 24 gauge MESHES 177 (v) Mosquito/Fly Proof Stainless Steel grade 304 wire mesh gauge with 0.50 mm dia wire and 1.40mm wide aperture. MESHES 178 (1) Plywood 10mm thick 179 (2) Flush Door 35mm thick (I.S.I. Marked) 180 (3) G.I. Barbed wire (Hot Dip) 181 (4) J. Hooks 182 Ballies (100mm average dia) WOODEN 183 A.C. sheet 6mm Corrugated 184 SAND paper 185 Anti termite treatment oil 186 Bleaching powder 187 P.V.C. pipe 110mm dia I.S.I. Make(working presure 6kg/sqcm) 188 P.V.C. pipe 90mm dia I.S.I. Make(working presure 6kg/sqcm) 189 P.V.C. pipe 75mm dia I.S.I. Make(working presure 6kg/sqcm) 190 P.V.C. Bend 100mm dia 191 P.V.C. Bend 75mm dia 192 P.V.C. Bend 50mm dia 193 P.V.C. Socket 100mm dia 194 P.V.C. Socket 75mm dia 195 P.V.C. Socket 50mm dia 196 P.V.C. pipe"s jointing solution (Tube) 197 350mmPipeSupply of RCC hume pipe NP-3 & Socket Hume pipe 198 450mmPipe Supply of RCC hume pipe NP-3 & Socket Hume pipe 199 600mmPipe Supply of RCC hume pipe NP-3 & Socket Hume pipe 200 900mm Pipe Supply of RCC hume pipe NP-3 & Socket Hume pipe 201 1000mm Pipe Supply of RCC hume pipe NP-3 & Socket Hume pipe 202 1200mm Pipe Supply of RCC hume pipe NP-3 & Socket Hume pipe 203 G.I. Pipe Class-B 15mm dia 204 G.I. Pipe Class-B 20mm dia 205 G.I. Pipe Class-B 25mm dia 206 G.I. Pipe Class-B 32mm dia 207 G.I. Pipe Class-B 40m dia 208 G.I. Pipe Class-B 50mm dia 209 G.I. Tee 15mm dia 210 G.I. Tee 20mm dia 211 G.I. Tee 25mm dia 212 G.I. Tee 32mm dia 213 G.I. Jamnut 15mm dia 214 G.I. Jamnut 20mm dia 215 G.I. Jamnut 25mm dia 216 G.I. Jamnut 40mm dia 217 G.I. Jamnut 50mm dia 218 G.I. Elbow 15mm dia 219 G.I. Elbow 20mm dia 220 G.I. Elbow 25mm dia 221 G.I. Elbow 40mm dia 222 G.I. Elbow 50mm dia 223 G.I. Socket 15mm dia 224 G.I. Socket 20mm dia 225 G.I. Socket 25mm dia 226 G.I. Socket 40mm dia 227 G.I. Socket 50mm dia 228 G.I. Reducing Socket 25mm to 15mm dia 229 G.I. Reducing Socket 25mm to 20mm dia 230 G.I. Reducing Socket 40mm to 25mm dia 231 G.I. Cross Tee 15mm dia 232 G.I. Cross Tee 20mm dia 233 G.I. Cross Tee 25mm dia 234 G.I. Reducing Tee 25x25x15mm dia 235 G.I. Reducing Tee 20x20x15mm dia 236 G.I. Reducing Tee 32x32x15mm dia 237 G.I. Reducing Tee Class B 40x40x15mm dia 238 PVC ball float valve 150mm dia (ball only) 239 PVC ball float valve 200mm dia (ball only) 240 PVC ball float valve 250mm dia (ball only) 241 Brass Ferrule (25mm) 242 Brass Ferrule (20mm) 243 Brass Ferrule (15mm) 244 Fullway Gate Valve (25mm) 245 Fullway Gate Valve (20mm) 246 Fullway Gate Valve (15mm) 247 C.P. brass shower heavy quality (Gem Mikado/ Excess"s Williams or eqv.) (CH-21 Item No. 50 SOR 2020-21) 248 G.I. Long Screw 15mm dia 249 G.I. Long Screw 20mm dia 250 G.I. Long Screw 25mm dia 251 G.I. Long Screw 32mm dia 252 G.I. Long Screw 40mm dia 253 G.I. Long Screw 50 mm dia 254 (a) G.I. Nipple 50mm Long (15mm dia) 255 (b) G.I. Nipple 50mm Long (20mm dia) 256 (a) G.I. Nipple 75mm Long (15mm dia) 257 (b) G.I. Nipple 75mm Long (20mm dia) 258 (a) G.I. Nipple 100mm Long (15mm dia) 259 (b) G.I. Nipple 100mm Long (20mm dia) 260 Brass Ball cock complete with Ball and Brass rod (15mm dia) 261 Brass Ball cock complete with Ball and Brass rod (20mm dia) 262 Brass Ball cock complete with Ball and Brass rod (25mm dia) 263 (a) C.I. Bib cock with Brass rod heavy quality 200gms. (15mm dia) 264 (b) C.I. Bib cock with Brass rod heavy quality 200gms. (20mm dia) 265 (a) C.I. Bib cock with Brass rod heavy quality (15mm dia) 266 (b) C.I. Bib cock with Brass rod heavy quality (20mm dia) 267 (c) C.I. Bib cock with Brass rod heavy quality (25mm dia) 268 C.I. Nozzle C.I. Stop cock heavy quality 200 gm. (15mm dia) 269 (a) C.I. Jali (100X100 mm) 270 (b) C.I. Jali (125X125 mm) 271 (c) C.I. Jali (150X150 mm) 272 (a) C.I. Jali Round 100mm dia 273 (b) C.I. Jali Round 125mm dia 274 (c) C.I. Jali Round 150mm dia 275 C.P. brass stop cock with Brass rod 400 gm 15mm dia 276 C.P. Pillar cock with Brass spindle. 15mm dia 277 (a) C.P. Brass waste jali for Sink 40 mm dia 278 (b) C.P. Brass waste jali for Wash Basin 32mm dia 279 P.V.C. waste pipe for W.H.B./Sink 280 P.V.C. connection 450mm long with two brass units 15mm dia 281 P.V.C. Pipe 600mm dia long with two brass units 15mm dia 282 (5 Litre) P.V.C Flushing cistern complete 283 (10 Litre) P.V.C Flushing cistern complete 284 Mirror of Atul make Indian polish of 600x450mm dia Size bevelled edge. 285 Raod roller with driver including P.O.L .

Contact Information