|
Total Prosthesis The Total Prosthesis (Denture) Is Intended For Rehabilitation, Ie Replacement Of All Arcade Teeth Involved (Upper And/Or Lower). It Must Be Made In Pink Acrylic, For Gum, And Colorless, To The Palate. It Must Have Prefabricated Acrylic Teeth, With Size, Shape And Color Indicated For The Patient To Be Rehabilitated. The Teeth Should Also Have A Good Union Based On The Prosthesis, Which Can Be Obtained By Drilling The Teeth And/Or The Use Of Appropriate Union Agents. The Prosthesis Should Also Have Adequate Gingival Sculpture, Finishing, Polishing And Thickness, Absence Of Roughness, Bumps, Bubbles, Tips And Other Inconveniences., Partial Removable Denture With Metal Frame The Removable Partial Prosthesis Is Intended For Rehabilitation, Partial Replacement Of The Arcade Teeth (Upper Or Lower). It Should Be Made On A Cobaltocrome Alloy Metal Structure (Cocr), With Good Adaptation To The Dental Arch And Adjacent, Bubbleless, Polished And Proper Flexibility Structures Of The Clips And Connectors. The Staples Should Have The Proper Design For The Tooth In Question, Have The Tip Of Your Retention Arm Located In The Retentive Area Of The Tooth (Below The Prosthetic Equator), While The Reciprocity Arm Must Be All Located Above The Prosthetic Equator. The Gums Should Be Made Of Thermosethable Pink Acrylic And The Teeth Should Be Prefabricated In Acrylic, Removable Partial Prosthesis To The Partial Removable Acrylic Prosthesis Is Intended For Rehabilitation, Partial Replacement Of The Arcade Teeth Involved (Upper Or Lower). It Should Be Made Of Thermopolymelimable Acrylic In Pink Colors, For The Palate. It Must Have Prefabricated Teeth In Acrylic, Tips And Other Inconveniences. Prostheses May Or May Not Have Retention Clips (Orthodontic Wire Clips), According To The Dental Surgeons Indication. The End Of The Staple Should Be Twisted In Order To Avoid Damage To Soft Tissues, And To Be Positioned In The Retentive Region Of The Tooth (Below The Prosthetic Equator), The Crown Crown The Crown In A Cheromer Is Intended For The Rehabilitation Of Anterior And/Or Inferior Pre-Molar Tooths. It Should Be Made In Ceromer On A Troquelized Model And Have Its Adjusted Adaptation On Non -Troquelized And Articulated Models. It Should Present Good Adaptation To The Work Model, Proper Polishing, Absence Of Bubbles, Blemishes And Porosities. It Must Present Proximal And Occlusion Points Of Contacts And Good Adaptation To The End Of The Preparation, Without Overcuting, Subcontractors Or Marginal Maladjustments. It Must Have Color, Shape, Contour, Thickness And Sculpture Appropriate To The Element To Be Rehabilitated. The Color Selection Will Be Referenced To The Vita Scale., Autopolimarizable Prosthesis Repair By Element, Addition Of Lost Teeth, Repair And Repair Of Fractures In Total Prosthesis (Pt) Or Removable Partial Prosthesis With Metallic Frame (Ppr) And Removable Partial Prosthesis Of Acrylic (Ppa), Repairs In Pp, Ppr And Ppa Acrylic Resin. This Item Refers To Prostheses Made By Other Laboratories And/Or Prostheses In Use To Over 12 Months., 18/03/2025
|
