Tender For Running Contract For Full Deposit Work In The Area Of Edsd Chuttmalpur Under Edd Behat - Work To ... in India

Work Detail

Tender For Running Contract For Full Deposit Work In The Area Of Edsd Chuttmalpur Under Edd Behat - Work To Be Done Under The Complete Deposit Scheme In The Jurisdiction Of Subdivision Chhutmalpur Under Electricity Distribution Section- Behat - Safe cartage of ST/ PCC poles up to 8.5/9/11/13 Mtr. from ESC, SRE/JE store to site of work at various sites including loading & unloading at both ends.(Dist.Up to 40 Km.) 3 Safely cartage of other complete line material / 11 KV XLPE cable / ABC cable(Except PCC /ST Poles) from ESC, SRE/ JE store to site of work at various sitesincluding loading, unloading at both ends.( Dist.App. 0 to 40 Km.) 4 Safe cartage of 10/25/63/ 100 KVA T/F from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 40 km.) 5 Safe cartage of 250 KVA T/F from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 40 km.) 6 Safe cartage of CT/PT Unit from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 40 km.) 7 Safe cartage ofMetering cubicalfrom ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 40 km.) 8 Erection of single support on ST/ PCC poles up to 8.5/9/11/13 Mtr MtrLong with complete fitting of all accessories of11 KV/LT line. complete. 9 Erection of double Pole on ST/ PCC poles up to 8.5/9/11/13 Mtr Mtr Longwith complete fitting with all accessories complete. 10 Fixing of 11 KV stay rods by digging of pits in block of 600X600X300 mm. &withnozzling of stay wire 7/10 SWG and fitting the same on the pole 11 Concreting of stay rod inratio 1:4:8 with Ist class brick ballast with cement, sand 12 Providing and Fixing of Stone Ped 300x300x75 13 Earthing of poles by earthing rod 14 Providing ofAll type MS Clamp for ST/ PCC poles with nuts bolts made of new MS flat iron 50x6 mm. 15 Providing of LT shekel insulator of size 100x115mm 16 Providing ofnuts & bolts of various sizes. 17 Providing ofSuspention clamp with I- Hook 18 Providing ofDead end clamp with I- Hook 19 Providing of Piercing connector Diff. size. 20 Providingof11 KV/LT cable terminationskit out door & indoor of size 3X35/3x70/ 3X120/3x185/3x300 sq mm. 21 Providing of Danger Board 22 Providing of G.I. Pipe 100mm 4"" dia Class B 23 Providing of Red Oxide Paint 24 Providing of Aluminum Paint 25 Painting ofST poles 11 Mtr, SP-55with 2 coats of synthetic enamel paint after one coat of ready mix primer as well as rubbing/cleaning of surface as required for proper completion of work. and remaining by Aluminium paint including all channels/clamps etc. 26 Removal of oldweasel/ Rabbit conductorfrom the Existing 11KV/ LT lines with making roll of conductor and shifting the same to ESC, SRE/J.E store including loading and unloading at both ends. 27 Laying, lifting, Stringing, sagging jumpring & binding ofACSR Weasel Conductor for 11KV/LT Lineincluding complete. 28 Laying, lifting, Stringing, sagging jumpring & binding ofACSR Rabbit Conductor for 11KV/LT Line including complete. 29 Laying, lifting, Stringing, sagging jumpring & binding ofACSR Dog Conductor for 11KV/LT Line including complete. 30 Removal of 10/25/63 KVA T/F from the existing D/P after opening HT & LT connection and with shifting the T/F from the site to ESC, SRE/JE store with loading & unloading at both ends. 31 Safe installation of 10/25/63/100 KVA T/F on the double pole with complete fittings including making connections and commissioning. 32 Construction of plinth for installation of 250KVA T/Fof size 1.5x1.5x1.5 Mtr. made of 9" thick wall in all the four sides with 6" thick RCC top duly filled with sand & plastered 12 mm. thick in ratio 1:4 with cement & sand on outer surface of brick wall . 33 Safe installation of 250KVA T/F on the Plinth with complete fittings including making HT connections and commissioning. 34 ProvidingofAluminum Bolted Type lug of size 240 sq mm. 35 Laying and making connections of LT XLPE cable 3.5x240sq.mm. from T/F to double pole (approx to 30 Mtr). 36 Providing and fixing of wire mesh fencing size 2.5x2.5x2.5 mt. grouting making frame of MS angal 35x35x5 mm and fixing four no. MS strip size 25x6 mmat equal distance in between the frame and fixing square mesh 50 mm square in each frame the fencing should cover all side of T/F with providing 1 No. door size 6’x3’ with sitakni & Dandala. 37 Safe installation ofCT/PT Unit on the double pole with complete fittings including making connections and commissioning. 38 Safe installation ofMetering cubical in the room with complete fittings including making connections and commissioning. 39 Chemical Earthing of Metering cubical/ CT/PT Unit/250 KVA T/Fand connecting with G.I. Strip of size 35X4 mmto the Metering cubical/ CT/PT Unit Complete Properly. 40 Laying, lifting, Stringing, proper sagging ABC cable of size 3x50+1x35+1x16/ 3x95+1x70+1x16/ 3x120+1x95+1x16 sq.mm. including fixing ofall accessories. 41 Laying, lifting, stringing proper sagging of 11 KV XLPE cable 3X35/3x70/ 3X120/3x185/3x300 sq mm of includingcomplete etc 42 Making of11 KV cable terminationskit out door & indoor of size 3X35/3x70/ 3X120/3x185/3x300 sq mm. 43 Laying and making connections of LT PVC/XLPE cable 4x16/4x25/4x35/3.5x50/3.5x70/ 3.5x150/ sq.mm. from T/F to double pole (approx to 20 Mtr). 44 Fabrication charges of Angle & Channal 45 Fixing of G.I. pipe 100mm 4"" dia 3.5 mtr. long at the both side of double pole. 46 Concreting of ST poles SP-55, 11/13 Mtr.long with cement concreting in bolck of 600X600X1500 MM. in ratio 1:4:8 with cement, sand and brick ballast size 1""x1.5"" with plinth. 47 Dismantling of existingPCC/ST poleafter opening of complete accessories. 48 Off shooting of tree branches touching the 11 KV/LT line.

Contact Information