Tender For Rate Contract For The Work Of Building Repairing Under Phed City Circle Jodhpur - Pwd Bsr B-13.12 ... in India

Work Detail

Tender For Rate Contract For The Work Of Building Repairing Under Phed City Circle Jodhpur - PWD BSR B-13.12 Repair to stone masonary in cement sand mortar 1:6 with old and new stone. 2 PWD BSR B-13.17 Removal and refixing stone chhajja 50 to 75mm thick including finishing,complete in all respects 3 PWD BSR B-13.4.1 Renewing Float glass panes,with puty and nails wherever necessary:4 mm thick plain glass panes. 4 PWD BSR B-13.18 Replacing broken roofing slab in patches including lime terrace,ceiling plast eretc.including removal of broken slabs 5 PWD BSR B-13.23Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete 6 PWD BSRB-7.12 Providing and fixing1st quality standard white,grey,ivory,fumered brown,light green,light blue and other light shades glazed tiles confirming to IS:13753 & IS:15622 of size 200mm x 300mm in walls,floors,steps,pillars etc.laidon a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 7 PWD BSR B-7.13Providing and fixing 1st quality MAT finished ceremictile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc.laidon abed of neat cement slurryfinished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete(including the cost of cement mortar bed 8 PWD BSR B-12.1.1 Plaster on new surface on wall in cements and mortar1:3 including racking of joints etc. complete fine finish :25mm Thick 9 PWD BSR B-12.1.3 Plaster on new surface on wall in cements and mortar1:3 including racking of joints etc. complete fine finish :12mm Thick 10 PWD BSR 2022-12.35 Colour washing of all shades to give an even shade including all scaffolding 11 PWD BSR 12.35.1New work (two or more coats) with a base coat of white washing with lime 12 PWD BSR 12.35.3 Old work (one or more coats) with whiting with a base coat ofwhite washing including scrapping old surface 13 PWD BSR B-11.13.3 Precast terrazo tiles of approved make, 20mm thick with marble chips of size upto 6mm laid in floors, and landing, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing completeon20mm thick bed of cement sandmortar1: 4.Dark shade using ordinary cement. 14 PWD BSRB 6.1.4 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30CM thick wall in:Cement Mortar 1:4 ( 1-Cement : 4-Sand). 15 PWD BSR B-6.2.4 Random Rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in :Cement Mortar 1:4 ( 1-Cement : 4-Sand). 16 PWD BSR B-12.31.2 Pointing on stone masonry in cements and mortar 1:3 cement :3 sand):Raised and cut pointing. 17 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 18 PWD 2022/3.1.5 M10 grade Nominal Mix1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 40mm nominal size) 19 PWD 2022/14.55 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 20 PWD 2022/13.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) 21 PWD 2022/12.41 Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: 22 PWD BSR 12.41.2 Old work (One or more coats). 23 PWD 2022/12.23 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 24 PWD 2022/12.46 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade 25 12.46.1 Two or more coats on new work 26 12.46.2 One or more coats on old work. 27 PWD 2022/12.40 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: 28 12.40.2 One or more coats on old work. 29 PWD 2022/12.37 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: 30 12.37.2(a) Old work (one or more coats) including scrapping surface andnecessaryrepairs.Colour change 31 12.37.2(b) Old work (one or more coats) including scrapping surface andnecessaryrepairs.Same colour 32 PWD 2022/11.3.1 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete 40mmthickwith20mmthicknominalsizeaggregate. 33 PHED BSR 2023-24/1.15 Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding,lowering,laying,aligning,fixinginpositionatalllevel/ depths in trenches complete includingall taxes, material,labour, inside lining, outside coating, testingandcommissioning alongwithpipelineaspertechnicalspecifications anddirection of Engineer-in-charge. 34 1.15.1 MS pipespecialsup to600mmdia (withminimum5mmthickness sheet) 35 PWD 2022/9.26 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 36 PWDBSR 2022/9.29 180cm high fencing with angle iron post 55x55x6mm. placed at every 3Mtr. apart 45cm. in ground embedded in cement concrete 1:3:6 (30x30x60cm) corner and every tenth post to be strutted with 55x55x6mm. angle iron provided with 6 horizontal lines and two diagonals of black barbed wire between two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete. 37 pwd bsr B-3/ 2022/3.8 Providing&fixingprecastcementconcretecoping1:2:4mix50mmthickcompleteas per specification : 38 PWD bsr 2022/4.1 Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix 39 pwd bsr 2022/4.9 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 40 pwd bsr 2022/4.10 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for : 41 pwd bsr 2022/4.10.1 Walls (any thickness) including attached pilasters,buttressesplinthandstring course. 42 pwd bsr 2022/6.2 Random Rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in : 43 pwd bsr 2022/6.2.4 Cement Mortar 1:4 ( 1-Cement : 4-Sand). 44 pwd bsr 2022/17.50 Repair to damaged plaster with high performance curing free, quick setting cement mortar & confirming to ASTM C 1600 in ratio of 1:4 with following properties of cement : Compressive strength of 20 MPa within 4 Hours, Curing free, bond strength of 4 MPa within 24 Hours, Non shrink & Non toxic in following steps- 1.Chopping loose and cracked plaster to required depth, cleaning the exposed surface with wire brush, cleaning of plaster surface with water as necessary and getting dried. 2. Plastering the surface with above mentioned high performance cement sand mortar 1:4 upto depth of 25 mm complete with all scaffolding. 3. No curing has to be done as the high performance cement used should be curing free. (This item is to be used in only emergency situation after decided by Engineer in charge ) 45 pwd bsr 2022/12.60.1 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work . 46 pwd bsr 2022/16.4.1 Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 47 pwd bsr 2022/16.1.1.3 Providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and thedirections of Engineer- in – charge .(Glazing and paneling to be paid for separately).Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) 48 pwd bsr 2022/16.1.2.3 For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately).Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) 49 pwd bsr 2022/12.34.1 White washing with lime to give an even shade including all scaffolding:New work (three or more coats). 50 pwd bsr 2022/12.35.1 Colour washing of all shades to give an even shade including all scaffolding :New work (two or more coats) with a base coat of white washing with lime. 51 pwd bsr 2022/9.12.1 Providing and fixing 1mm thick M.S. sheet garrage door shutters with frame of 40 x 40 x 6mm. angle iron 3mm M.S. gusset plates at the junction and corners including all fittings and applying a coat of approved steel primer : (Excluding cost of frames)Using M.S. angles 40 x 40 x 6mm for diagonal braces. 52 pwd bsr 2022/9.39 Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge 53 pwd bsr 2022/14.25 Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. 54 pwd bsr 2022/11.18.1 Kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand)For area of each slab from 901 to 2000 Sq.Cm : 55 PWD bsr B/2022/3.1.6 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 56 pwd bsr B 2022/1.2 Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonne roller, or stone or steel rammers and rolling every 3rd and top- most layer with power roller of minimum 8-10 tonne capacity and dressing up in embankment for roads, flood banks marginal banks and guide banks or filling up ground depressions, lead up to 50 Mtr. and lift up to 1.5 Mtr.:All kinds of soil 57 RUIDP BSR 2023 38.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately For the purpose of measurement the entire treated surface will be measured. 58 RUIDP BSR 2023 32.41 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer"s specifications including appropriate priming coat, preparation of surface, etc. complete. 59 RUIDP BSR 2023 32.41.1 On steel work 60 RUIDP BSR 2023 32.2 Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 15 mm cement plaster on the rough side of single or half brick wall of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar 61 RUIDP BSR 2023 32.2.1 1:4 (1 cement : 4 fine/ coarse sand) 62 RUIDP 3.1 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 63 3.1.1 In cement mortar 64 RUIDP 3.3 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 65 3.3.2 Of area beyond 3 sq. metres 66 RUIDP 3.6 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 67 RUIDP 3.34 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 68 Brick work with modular bricks of class designation 75 in foundation and plinth in: 69 RUIDP 24.3.2 Cement Mortar 1:6 (1 cement : 6 coarse sand). 70 RUIDP 30.10 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : 71 30.10.6 Ordinary cement without any pigment. 72 RUIDP 29.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 73 29.5.1 Using M.S. angels 40x40x6 mm for diagonal braces. 74 RUIDP 29.14 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 75 RUIDP 33.67 Finishing walls with water proofing cement paint of required shade : 76 33.67.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. 77 RUIDP 33.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : 78 33.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) 79 RUIDP 32.1 Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 80 32.1.2 1:6 (1 cement : 6 fine/ coarse sand) 81 RUIDP 27.25 P & F 1st quality Heavy Duty Vitrified glazed MAT tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absorption less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grouting the joints with white cement and matching pigment etc complete. 82 27.25.1 size 600 mm X 600 mm 83 PWD 6.1 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: 84 PWD 6.1.3 Cement Mortar 1:3 ( 1-Cement : 3-Sand). 85 PWD 6.1.6 Cement Mortar 1:6 ( 1-Cement : 6-Sand). 86 PWD 16.1 Providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and thedirections of Engineer- in – charge .(Glazing and paneling to be paid for separately). 87 16.1.1 For fixed portion 88 16.1.1.2 Powder coating aluminum( minimum thickness of powder coating 50 micron) 89 PWD 9.8 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 90 PWD 6.2 Random Rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in : 91 PWD 6.2.3 Cement Mortar 1:3 ( 1-Cement : 3-Sand). 92 PHED BSR 8.3 Providing and fixing steel, gate, grating and grills made of angles, tees, square bars, flats or black pipe with hold fast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide and two coat of enamel paints. 93 PWD Electric BSR 2022/1.1 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it"sISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thickHot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws,making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure "A" attached with this BSR 94 1.1.1 Short point (up to 3 mtr.) 95 1.1.2 Medium point (up to 6 mtr.) 96 1.1.3 Long point(up to 10 mtr.) 97 PWD Electric BSR 2022/5.1 P & F 1.2 mm thickG. I. / M .S. Sheet boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) in recessed/surface as required.For additional technical parameters of product / work refer Annexure "A" attached with this BSR 98 5.1.1 1.2 mm thickM. S. Sheet boxes 99 5.1.1.1 75mm x 75mm x 60mm 100 5.1.1.3 150mm x 75mm x 60mm 101 PWD Electric BSR 2022/15.4 Providing & Fixing of1200 mm sweepBLDC technologypower savingceilingfanwhich can withstand on votage fluctuationsfrom 140 volts to 240 volts ,power factor not less then 0.9 , service value (CMM/W) minimun 6.85 , air delivery minimun 220 CMM, speed minimum 330 RPM ( tolerance as per IS:374 2019 ) THD less then 10%and complete with down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steelpipe up to 80 cm, cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 102 15.4.1 Without Remote 103 PWD Electric BSR 2022/7.29.1 Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printedmade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating ,includingall as per pre approved by Engineer in charge,making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure "A" attached with this BSR 5 step fan regulator 2 Module 360 dgree rotating 104 PWD Electric BSR 2022/15.9 Providing & Fixing ofof M.S. J- hook of standard design made out of 16 mm dia. M.S. round bar and fixed withcement concrete mortar with required support as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 105 PWD Electric BSR 2022/17.2 Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housingSMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture.system lumen efficacy ≥ 100 lm/Watt output, internal surge protection of 2.5 KV ,THD <20% ,p.f.≥0.95,CRI >80 , life time of minimum 35000 Burning Hours with , 70% of intialLumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As perANSI Bin) , maximum power consumption should not more than the specified rating andFixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures WordMark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own inhouse NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80)certificate /Report from OEM shall be submitted. All as per pre approved by Engineer in charge. Foradditional technical parameters of products/ work , refer Annexure "A" attached with thisBSR . 106 17.2.2 1200mm , Min. Lumens output 2000 lm LED Tube rod with Polycarbonate Housing 107 PWD Electric BSR 2022/4.1 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure "A" attached with this BSR 108 4.1.2 2 x 1.5 sq.mm 109 4.1.6 2 x 2.5 sq.mm 110 PWD Electric BSR 2022/6.1 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure "A" attached with this BSR 111 6.1.1 Single pole MCB (With B/C curve tripping Characteristics) 112 6.1.1.26 A to 32 A rating 113 6.1.2 Double pole MCB(With B/C curve tripping Characteristics) 114 6.1.2.2 6 A to 32 A rating 115 PWD Electric BSR 2022/7.9 Providing & Fixing ofISI markednon modular 6A hanging bell push/one way switch made out from industrial grade Polycarbonate or fire resistant ABS materialincluding making connection testing etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 116 PWD Electric BSR 2022/7.10 Providing & Fixing ofof 3/5 pin 6 amp. flush typenon modular socketmade out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal with Porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 117 PWD Electric BSR 2022/7.11 Providing & Fixing of3/6 pin 16 amp flush type non modular socketmade out from Industrial grade Polycarbonate or fire resistant ABS material, brass terminal with Porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR 118 PWD Electric BSR 2022/7.1 P & F ISI marked (IS:3854) 6 amp. flush type non modular switchwith CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR 119 PWD Electric BSR 2022/7.2 P & F ISI marked (IS :3854) 16 amp. flush type non modular switch CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 120 PWD Electric BSR 2022/7.6 Providing & Fixing ofISI marked (IS :3854) twin controlnon modular 6A switch surface type as per PWD specification for electrical Works, made out fromindustrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screws includingmaking connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 121 RUIDP 67.11 Providing & Fixing of IK08 IP-66 protected high power LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each . Integrated potted driver as a unique BIS R number having efficiency more than 85 % and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy >=125 lm/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10% , driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector , Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K ±355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 122 RUIDP 67.11.2 High Power LED Flood Light Minimum lumen output 6200 lm 123 PWDElectrical 5.1 P&F 1.2 mm thicik GI /MS sheet boxes duly finished with two coats of red oxide and with earthing terminal of following size(nominal size) in recessed/surface as required. For additional technical parameters of product/ work refer annexure "A" atteched with this BSR 124 PWD Electrical 5.1.1 1.2mm thick MS sheet boxes 125 PWD Electrical 5.1.1.4 175mm*100mm*60mm 126 PWD Electrical 7.28 P&F of modular type lockable feature socket duly made out of unbreakble and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating, incluing all as per pre approved by Emgineer in Charge, marking connections, testing etc. as required . For additional technical parameters of product/work refer Annexure "A" attached with this BSR. 127 PWD Electrical 7.28.1 6A 3/5 pin shuttered socket 128 S1/1.44.1 P&F Beveled edge mirror of special glass of appd make (Atul/ equivalent) complet with 6mm thick asbestos cemetn sheet ground fixed to wooden scrwes & washers.Size 600 x 450mm x 4mm thick 129 S1/1.49.1 P&F liquid soap contained with brackets complete of approved make : C.P. Brass 130 S2/2.1.1 P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) &M.S. clamps including cutting and making good the walls and floors : Exposed on wall 15 mm dia nominal bore. Class A 131 S2/2.6.1 P & F Pillar Cocks (IS:8934 Mark) of superior quality and approved make : C.P. Pillar cock fancy type, 15 mm nominal bore. 132 S2/2.11.1 P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball complete : Brass wt. Not less than 300 gm,15mm 133 S2/2.12.1 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.C.P. Inlet connection 15 mm Brass (IS:8931 marked) 134 S2/2.13.1 P & F 15 mm. Dia Connection pipe of approved quality/ make: PVC pipe with C.P. Brass nuts up to length 300 mm. 135 S2/2.15.1 P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 15 mm nominal bore. 136 S2/2.26.3 P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design.500 litres capacity 137 PWD/BSR/2022/S-1/1.36.5 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :Size 610 mm x 510 mm 138 PWD BSR/s-1/1.36 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : 139 1.36.1 Size 450 mm x 300 mm 140 1.36.4 Size 580 mm x 450 mm 141 S1/1.68 Providing & Fixing Premium Quality white glazed vitreous china Sanitary Wares (IS:2556 Mark) of approved make as per direction of Engineer-in-charge including cutting and making good the wall and floor. 142 S1/1.68/1.68.4 Double Syphonic European W.C. with mounted W.V.C. flushing cistern of 10 litre capacity complete with all necessary internal fittings with Hydraulic seat cover. 143 S1/1.69/1.69.2 Providing & Fixing premium qulaity WVC Urinal with PVC waste pipe, dome couplings, concealed iron brackets or screws etc. complete.Flat Back (large) or half stall size 590x375x390 mm. 144 S1/1.66 P & F C.P. brass Urinal Spreader for Large Urinal of heavy duty of approved make as per direction of Enginner-in-Charge

Contact Information