|
tender for Talbehat Reorganization Water Supply Scheme Under Amrut 2.0 Survey Soil Investigation Design Supply Of All Materials Labour Tandp Etc Required For Construction Erection Completion Testing And Commissioning Of Water Supply Works Such As Intake Well, Bpt Wtp Rcc Oht Zps Cwr Cum Pumping Station Rising, 1 INTAKE WELL 8 M DIA WITH FOOT BRIDGE (9.0 MLD) 2 Survey, Soil investigation, Design, Supply of all materials, labour, T&P etc. required for construction,of Intake- well - cum - pump house of 8.0 m. internal dia. The intake well upto floor level shallbe firmly based on suitable foundation made with open technologyand Annular raft foundation, including construction of 1.0 m. wide R.C.C. balcony at plinth level, construction of Pump House made of brick masonry, duly embraced within R.C.C. column, and fitting of doors and windows, making opening arrangement at floor level of pump house (8.00 m. dia and 4 m. height) including steel cage hinged with locking arrangement, duly supported on IS MB 300. plateform for transformer ,meter room and HT pannel room,LT pannelVentilator arrangement along with fixing of 250 mm. dia. DID/F pipesand Sluice Valves etc. as per site requirement or as per the design. The work also includes 20 mm. dia. G.I.Pipe (medium) railing in three rows on both sides of stair and balcony and fixing of 0.5m. wide S.S. ladder made of 50 x 50x 6mm. angle S.S. ladder from floor of pump house to floor of intake well, duly supported on R.C.C.landing at suitable interval. The ladder shall run spirally inside the intake well and each landing shall be supported on R.C.C. M.S. channelpost, spaced not more than 1.5 m. interval including Construction of R.C.C. foundation block as required. The floor of pump house & balcony shall be of Kota Stone & on foot bridge floor shall be plain chequered tiles etc. complete. Frames for doors shall be made of 50x50x6 mm. M.S. angle iron and ionized and shall be partly panelled and glazed, made of suitable steel sections, conforming to relevant BIS. The work also includes painting of all concrete surfaces with three coats of approved cement paint and painting of pipes, doors, windows with anticorrosive paints including design of intake well, foot bridge, pump house etc. considering seismic and other forces as per relevant BIS requirements.erection, completion, testing & commissioning of Intake well. 3 Survey, Soil investigation, Design, Supply of all materials, labour, T&P etc. required for construction, 4.0 mts. wide R.C.C Foot bridge from Intake well to bank of river for length of 225 mts. 4 Provision for suitable provision for dismantling and reinstatement of pitching, roads and boundary wall of Matatila Dam etc. 5 CONSTRUCTION OF 9.0 MLD CAPACITY WATER TREATMENT PLANT 6 Survey, Soil investigation,(including topographical survey, geotechnical investigation and other Surveys as required) for Design and Drawing, Supply of all materials, labour, T&P etc. required for construction,of specified capacity (9.0MLD) of WTP based on 22 Hrs. operation (9 MLD + 25%) extra over loading capacity includinginlet chamber, aeration fountain / cascade, inlet channels including mechanical/manual fine/coarse screens, flash mixer, mixing channel with Parshall flume and flow measuring arrangement, clariflocculator with conventional, filter house and filter plant including back wash tank and back wash pumps with 100% standby, chemical house, coagulant feed tank with feed mechanism, poly aluminium chloride (PAC) or other coagulant tank of specified capacity and nos. with mixing and dosing arrangement complete, vacuum feed gas chlorinator with 100% standby, sludge handling unit and recycling of collected water from sludge etc. complete,All WTP scada Opratedexternal and internal electrification, laboratory building with all specified lab equipment, admin building, Quarter (One no.), sanitary block with necessary water supply and drainage arrangement, campus roads, landscaping and other campus development works, rain water harvesting, etc. all required works complete as per the direction of Engineer-in-Charge.The WTP shall be fully automatic based on PLC/SCADA with real time remote monitoring system and online contineuous effluent monitoring system. 7 RCC CWR;Detailed Survey, Design and Drawing, supply of all material, labour, T&P etc. required for construction of Ractangular, R.C.C Clear Water Reservoir cum pump house including various works like 1 m wide stair case with stainless steel hand railing to go inside reservoir, sump below the pump house area, stainless steel railing over the R.C.C slab of reservoir, Granular texture finish on exterior surface of pump house, gantry beam, food grade epoxy coating of FOSROC / Ciba-Geigy or reputated brand on inside surface area of water container after testing for water tightness, kota ston floring,bypass arangment ,and soil testing for Bearing capacity of capacity mentioned as under:Note : The bid prices of Clear Water Reservoir / Pumping Stations are to be submitted considering the depth of excavation may extend up to 6 m BGL. Design and Drawing approved by competent authority and Design vetted by Reputed Govt. Engineering College. 8 Clear Water Reservoir 750 KLCapecity(in Two part With septration wall) at WTP Campus 9 Zonal CWR, CoveredZone- I & Zone- II. Capacity550 kl at Mata Tila Zonal Campus 10 Survey, Soil investigation,(including topographical survey, geotechnical investigation and other Surveys as required) for , Design,Drawing includingSupply of all materials, labour, T&P etc. required for construction,ofScada Room (RCC Frame Structure) at Intake Point(4m x 4m x 4 m) 11 Survey, Soil investigation,(including topographical survey, geotechnical investigation and other Surveys as required) for , Design,Drawing includingSupply of all materials, labour, T&P etc. required for construction, Construction ofLT Panel Room (RCC Frame Structure) as per type design (5m x 5m x 4 m) 12 Survey, Soil investigation,(including topographical survey, geotechnical investigation and other Surveys as required) for , Design,Drawing includingSupply of all materials, labour, T&P etc. required for construction, Construction ofMeterRoom (RCC Frame Structure) as per type design (4m x 4m x 4 m) 13 Survey, Soil investigation,(including topographical survey, geotechnical investigation and other Surveys as required) for , Design,Drawing includingSupply of all materials, labour, T&P etc. required for construction,ofScada Room (RCC Frame Structure) at Intake Point(10m x 4m x 4 m) 14 Survey, Soil investigation,(including topographical survey, geotechnical investigation and other Surveys as required) for , Design,Drawing includingSupply of all materials, labour, T&P etc. required for construction,ofChlorination Room (RCC Frame Structure) at Intake Point(6m x 4m x 4 m) 15 Construction of Over Head Tank: Detailed Survey, Design and Drawing,Soil Testing and Construction of RCC Overhead Tank ( RCC mix grade as per latest IS Specification.) on Raft and pile cum raft foundation (Keeping the minimum foundation depth to be 2.5 m below natural ground level) at the site of work as per site condition of different of capacitymentionedand staging capacity including Excavation of foundation in all type of soil or rockas required with continuous bailing out of water, including cutting of rock with special T&P, making temporary approach road ,Ventilator at top dome,and Water level indicator, Lightening conductor, D.I. D/F Verticle pipes (Inlet Pipe, Outlet Pipe, Overflow Pipe & Washout Pipe), duck foot bend, puddle collers and bell mouths,Reputed makeSluice valve scada compitable on inlet, outlet & washout pipe and Valve Chamber, Bye-pass arrangement of OHT, Flooring, Apran & Drain (100 mm thick PCC of 1:2:4 & 100 mm thick RCC of 1:1.5:3), Floor shall be 30 cm above the finished ground level of Campus, Two coat apex painting over one coat primer of approved colour after finishing of RCC surface with grinder, repair of pin holes, unevenness., Railings-Mild Steelrailing 90 cm hight minimum weight65 Kg per Meter consist of minimum 6 mm thick flat and 12mm square bar top of C channel around stair case (both sides), balcony & top dome periphery, S.S ladder from opening of top dome to bottom dome inside tank, Stair case (Seperate two column basedRCC staircase and 1 m wide balcony with arrangement of M.S Gate with cage), Food grade epoxy coating of FOSROC / Cika-Geigy or reputated brand on inside surface area of water container after testing for water tightness and site development ( PLANTATION AND Placing The GRASS up to 100 SQM) all complete as per direction of Engineer in charge. Design and Drawing approved by competent authority and Design vetted by Reputed Govt. Engineering College. 16 Proposed OHT Zone-II 850 kl 23 m staging 17 Break Pressure Tank50 KL/13.5M (MJP SOR 2023-24, Page No.275) RCC OHT;Detailed Survey, Design and Drawing,Soil Testing and Construction of RCC Overhead Tank ( RCC mix grade as per latest IS Specification.) on Raft and pile cum raft foundation (Keeping the minimum foundation depth to be 2.5 m below natural ground level) at the site of work as per site condition of different of capacitymentionedand staging capacity including Excavation of foundation in all type of soil or rockas required with continuous bailing out of water, including cutting of rock with special T&P, making temporary approach road ,Ventilator at top dome,and Water level indicator, Lightening conductor, D.I. D/F Verticle pipes (Inlet Pipe, Outlet Pipe, Overflow Pipe & Washout Pipe), duck foot bend, puddle collers and bell mouths,Reputed makeSluice valve scada compitable on inlet, outlet & washout pipe and Valve Chamber, Bye-pass arrangement of OHT, Flooring, Apran & Drain (100 mm thick PCC of 1:2:4 & 100 mm thick RCC of 1:1.5:3), Floor shall be 30 cm above the finished ground level of Campus, Two coat apex painting over one coat primer of approved colour after finishing of RCC surface with grinder, repair of pin holes, unevenness., Railings-Mild Steelrailing 90 cm hight minimum weight65 Kg per Meter consist of minimum 6 mm thick flat and 12mm square bar top of C channel around stair case (both sides), balcony & top dome periphery, S.S ladder from opening of top dome to bottom dome inside tank, Stair case (Seperate two column basedRCC staircase and 1 m wide balcony with arrangement of M.S Gate with cage), Food grade epoxy coating of FOSROC / Cika-Geigy or reputated brand on inside surface area of water container after testing for water tightness and site development ( PLANTATION AND Placing The GRASS up to 100 SQM) all complete as per direction of Engineer in charge. Design and Drawing approved by competent authority and Design vetted by Reputed Govt. Engineering College. 18 Rehabilitation of Existing OHT Zone-I 600 kl 19 (A) Epoxy Injection : Drilling and fixing NRV Nozzle at 30 cm c/c in RCC including drilling hole. Drilling 14mm dia T/2 mm deep holes in structure membrane at the interval of T/2 mm C/C in stagerred manner as per method statement. Cleaning hole by air blower pride to fixing of nozzle after grouting of epoxy based products cut the nozzle by cut of wheel and repair the same with epoxy mortar and sealing of cracks/porous Concrete with epoxy grout Don Grout M compressive strength more than 100 MPa, Tensile Strength more than 100 MPa, flexible strength 100 MPa rate including material nozzle , drilling injecting machine , Labor etc,Fixing NRV Nozzle at 30 cm c/c each Nozzle approximate epoxy inject 0.25 kg.Chipping of unsound/weak concrete material 50mm average thickness from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all Providing and laying in position reinforced cement concrete (mix 1:1.5:3)including MS Steel bars and labour, T&P required Providing, mixing and applying bonding coat of approved epoxy bonding adhesive having coverage 2.20 sqm/kg on chipped portion of RCC as per specifications 20 (B) Providing and applying epoxy paint of approved make (Shalimar, Ciba or Mahindra & Mahindra) to concrete surface for RCC ESR or GSR or any other structure including cleaning the surface by scrapping and air blowers to the satisfaction of Engineer-in-charge, necessary scaffolding, etc. complete with all leads and lifts and giving satisfactory hydraulic test for water tightness as per I.S. codes.Supply and Delivery and fixing of outside MS Ladder of 45cm clear wide made out of 50 mm x 50mm x 6mm MS angle for sides and steps in 16 mm MS plain rods fixed at 30cm C/C welded jointed etc ., providing with suitable side supports, clamps and locking arrangements provided with two coats of approved enamel paint over one coat of redoxide paint , for providing access to roof top of OHT of suitable inclined length , including bottom anchorage and transportation The rate includes concrete bed block in CC 1:2:4 using 20mm HBGS at top and bottom of suitable size with necessry anchor boltsProviding and fixing water level indicator upto 5 M height including M.S. enamelled gauge plate 300 mm wide and 3 mm thick, copper float, providing and fixing required accessories such as pointer, pulleys, nylon thread including cost of all material, labour, etc. complete.50mm thick 1:1.5:3 P.C.C. floor with cement, coarse sand and 20mm gauge stone ballast with base concrete (75mm thick) 1:4:8 cement,coarse sand & Stone ballast 40mm gauge.Construction of PCC drain 150 x 150 mm & PCC 1:2:4 over PCC 1:4:8foundation including supply of all material, labour, T&P etc. required for proper completion of the work. (A+B) 21 Excavation for pipe line trenches in soil mix / all type of rocks with moorum/shingles/kanker requiring use of special T&P ie. pick axe, sabbals etc. lift upto 1.50 m lead upto 50 m. stacking and spreading as directed, normal dewatering,preparing the bed,Filling watering ramming of excavated earth into pipe line trenches and disposal of surplus earth upto a distance of 10 KM from the centre of the pipe line trenches. 22 Soil Mixed with moorum/ Shingle Kankar (0.00-1.50M BGL) 23 Excavation for pipe line trenches in soil mix / all type of rocks with moorum/shingles/kanker requiring use of special T&P ie. pick axe, sabbals etc. lift upto 1.50 m lead upto 50 m. stacking and spreading as directed, normal dewatering,preparing the bed,Filling watering ramming of excavated earth into pipe line trenches and disposal of surplus earth upto a distance of 10 KM from the centre of the pipe line trenches. 24 Same as above item but inAll type of rock. (0.00-1.50M BGL) 25 Supply of ISI mark DI K-9 and K-7 S&S pipes (push on joints) of following class and diameters inclusive of jointing material (Rubber gasket of EPDM Quality IS 12820 / 1989) andand Supply of specialsconforming to IS 8329/2000 for its latest ammendment F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection chacking and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. with jointing Materials including all taxes, freight, loading, unloading, insurance, duties etc., all complete. and supply of all DI DF/DI DS specialslike Tees, all type bend ( For Distribution, Feedermain And Rising main Purpose ) 26 80 mm (DI-k7) 27 100 mm (DI-k7) 28 125 mm (DI-k7) 29 150 mm (DI-k7) 30 200 mm (DI-k7) 31 250 mm (DI-k7) 32 300 mm DI K-7 ( BPT to Zonal CWR ) 33 Supply of ISI mark DI K-9 S&S pipes (push on joints) of following class and diameters inclusive of jointing material (Rubber gasket of EPDM Quality IS 12820 / 1989) and Supply of specials conforming to IS 8329/2000 for its latest ammendment F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection chacking and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. complete. with jointing Materials including all taxes, freight, loading, unloading, insurance, duties etc., all complete. and supply of all DI DF/DI DS specialslike Tees, all type bend ( For Distribution, Feedermain And Rising main Purpose ) 34 100 mm DI K-9 CWR to Kashiram and Lohoya Awas Yojna - OHT 35 150 mm DI K-9 Common line and CWR to Zone -1 OHT 36 200 mm DI K-9CWR to Zone -2 OHT 37 250 mm DI K-9 Common line and ( WTP to BPT ) 38 300 mm DI K-9 ( WTP CWR to MES CWR ) 39 400 mm DI K-9 Raw Water Raising Main ( Matatila dam to WTP ) 40 Lowering, laying and jointing with SBR ruber gasketsD.I. K-7/ D.I. K-9 of various classes with DI / MS specials of following diameter in proper position, grade and alignment including conveyance of material to site of work. It also includes cost of jointing materials and rubber rings labour,hydraulic testing etc. complete.Carting of following sizes (Dia. in mm.) of pipes and specials including jointing mateirals from store to site of work lowering the same into excavated pipe line trenches true to alignment and gradient and jointing the same including testing of pipe line including supply of all materials labour T&P etc complete and as per direction of Engineer Incharge. 41 80 mm (DI-k7) 42 100 mm (DI-k7) 43 125 mm (DI-k7) 44 150 mm (DI-k7) 45 200 mm (DI-k7) 46 250 mm (DI-k7) 47 300 mm DI K-9 and k-7( WTP CWR to MES CWR ,BPT to Zonal CWR ) 48 400 mm DI K-9 Raw Water Raising Main ( Matatila dam to WTP ) 49 Supply of following type of valves as per specifications F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges, including DI tail pieces with EPDM fully covered wedge and epoxy coating, internal and externalunloading & stacking the same etc. complete. Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 50 80 mm 51 100 mm 52 125 mm 53 150 mm 54 200 mm 55 250 mm 56 300 mm 57 400 mm 58 100mm dia for Scour valve 59 Air valves as per IS 14845 : 2000 60 50 mm 61 80 mm 62 100 mm 63 Fire Hydrant as per IS Code 908 : 1975 64 80 mm 65 Carting, lowering, laying, aligning, fixing in position and installation of following valves in pipe line including all material, labour, testing and commissioning as per direction of Engineer-in- charge.Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 66 80 mm 67 100 mm CWR to Kashiram Lohiya Awas Yojna - OHT 68 125 mm 69 150 mmCWR to Zone-1 OHT 70 200 mm 71 250 mm 72 300 mm 73 400 mm 74 100mm dia for Scour valve 75 Air valves as per IS 14845 : 2000 76 50 mm 77 80 mm 78 100 mm 79 Fire Hydrant as per IS Code 908 : 1975 80 80 mm 81 Supply of all materials, labour, T&P etc. required for construction of following masonry type chambers as per type design.Sluice valve Chamber 82 80mm to 250 mm 83 Air Valve Chamber 84 50 mm dia to 80 mm dia 85 Scour Valve Chamber 86 Fire Hydrant Chamber 87 Supply of all materials, labour, T&P etc. required for construction of following masonry type chambers as per type design.Sluice valve Chamber 88 up to 100 mm 89 250mm 90 300mm to 400 mm 91 400mm 92 Air Valve Chamber 100 mm 93 Air Valve Chamber 80 mm dia 94 Designing, supplying, installing, commissioning & testing of pilot operated hydraulically controlled Pressure Reducing Valve (PRV) for distribution network to maintain a constatnt downstream pressure regardless of fluctuation in inlet pressure or flow with fixed set points inclusive of all the accessories like pressure gauge etc. as per given specifications. 95 100 mm 96 125 mm 97 150 mm 98 200 mm 99 250 mm 100 Providing new water supply house connection to the consumersfrom new distribution pipe line of following diametersincluding making ferrule connection, cost of ferrule, 15 mm dia HDPE and GI pipe, saddle piece, ball valve, specials, excavation, refilling of pit etc. complete. It also includes supply of all materials, labour, T&P etc. required for proper completion of the work. As per attached drawing. 101 For 80mm -110 mm dia 102 For 125mm-150 mm dia 103 For 200mm-250 mm dia 104 Dismantling (cutting by sharp eage machine tools) of following type of road surfaces for laying of pipe line and house connection work including sorting out of serviceable materials and disposal of unserviceable materials. 105 Bituminious Road 106 Cement Concrete Road (PCC) 107 Interlocking Tiles Road 108 Brick on edge Road (BOE) 109 Re-instatement of following type of road surfaces after laying of pipe line and house connection work including supply of all materials, T&P etc. requuired for proper completion of the work as per direction of engineer-in-charge. The quantity of re-instatement has been increased by thirty percent in the view of additional damaged of dismantled road due to traffic / vehicle movement. 110 Bituminious Road (Sub-Base + Base + BM + PC + Tack coat) 111 Bitumen Road (SDBC+ Tack coat) 112 Cement Concrete Road (PCC) 113 Interlocking Tiles Road 114 Brick on edge Road (BOE) 115 Construction of thurst block in RCC 1:2:4 at bends & Tee in feeder main to DMAsincluding supply of all labour, material, T&P etc. complete as per the details given below :-No. of DMAs - 4Total no. of bends & Tee - 12 (considering 3 no. bends & Tee in each DMA)Qty. of concrete - 12 x 0.5 cum = 6 cum. (considering 0.5 cum concrete at each bend) 116 Providing nominal reinforcement @ 0.15% of item no. 13 including cutting bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete (including cost of binding wire and MS Bar) 117 Repairing of drain/ public ramp/other miscellaneous structures which are coming in alignment of pipe line and damaged during the laying of pipe line including supply of all materials, labour, T&P etc. required for proper completion of the work. 118 Brick masonry in cement mortar 1:4 119 12mm thick plaster in cement mortar 1:4 120 Stone masonry in cement mortar 1:6 121 RCC M-20 (including MS work) 122 Provision for crossing of Nalas (0.5mto 2.0 m width) for laying of pipe line including necessary specials, T&P and arrangement of diversion of water, baricatings etc required, with dismantelling of drains and reconstruction of same as per type design of the existing drain. 123 0.3 - 0.5 m 124 0.5 - 1.0 m 125 1.0 - 1.5 m 126 1.5 - 2.0 m 127 Provision for crossing of Nalas for laying of pipe line using HDPE casing pipe of suitable dia. and length 0.60 m more than the outer width of nala, labour, T&P, necessary arrangement for diversion & pumping of water if required, barricading etc required for proper completion of work as per directions of engineer-in-charge. 128 0.3 - 0.5 m (Clear span) 129 0.5 - 1.0 m (Clear span) 130 1.0 - 1.5 m (Clear span) 131 1.5 - 2.0 m (Clear span) 132 Repairing / Shifting of existing water supply house connection due to falling in alignment of pipe line including supply of all materials, labour, T&P etc. required for proper completion of the work. 133 Inter connectio Withexesting risigingmain under Railway Crossing and NH crossing 134 Inter connection with exesting risigingmain 135 CWR to Kashiram Awas Yojna - OHT 136 CWR to LohiyaAwas Yojna - OHT 137 CWR to Zone I - OHT 138 Disposal of surplus earth /unserviceable material, by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. 139 300mm 140 BOUNDARY WALL Construction of Boundry wall around campus as per unit estimate with RCC Columns @ 3.0m c/c distance with plinth beam and brick work including supply of all Materials, Labour, Tools and Plants etc. complete., as per departmental type drawing.Construction of2.0 meter high compound wall from formation level of campus,comprising of 230mmx230mm RCC Columns @ 3.0 m c/c distance with 230 mm thick beam at plinth and top, brick work of 230 mm thick in 1:4 and 12 MM THICK 1:4 cement plaster over all surface of wall , two coat of Exterior emulsion paint of approved reputed make over one coat of primer and even surface preparation by applying 2-3 layer of approved reputed make Puttyas perdesign approved by engineer in Charge, including supply of all material, labour, T& P etc complete. 141 OHT / CWR Campus 142 M.S. GATE Supply and fixing M S iron gate 4.5M wide with a wicket gate including primer and painting etc all complete OHT / CWR Campus and wtp campus 143 Construction of pcc drain Construction of PCC drain 250 x 250 mm & PCC 1:2:4 over PCC 1:4:8foundation including supply of all material, labour, T&P etc. required for proper completion of the work. 144 Road Construction of following types of Road/ flooring for development of CWR / OHT campus required as per site condition 145 C.C. interlocking tile Road 146 Staff quarter General Residential Quarters for staff 147 1 set = 4 nos. of staff quarters (2 G.F. + 2 F.F.) including common stair case and other miscellaneous works. The plinth area of each staff quarter is 57.706 sqm.Detailed Survey, Design& Drawing, Construction of Residential Building based Office Building on R.C.C frame structure at different location finished with all respect, flooring made up with vitrified Tile/ Kota stone , Flush door shutter , glazed window cum ventilation including mosquito proof shutter, waterproofing at roof , anti-skid tile at toilet / bathroom / kitchen , water supply and sanitary work & electrification with all fixture, painting with 3 coat apex at exterior surface and emulsion at interiorsurface including2 coat Birla white puttyofbuilding, apron around building, appropriate size of septic tank and soak pit, including supply of all material, labour, T&P complete as per the direction of the engineer in charge 148 Electrical and Mechanical Items 149 INTAKE WELL AT MATATEELA DAM FOR 9.0 MLD WTP 150 PUMPING PLANTS: 151 Supply, installation, testing and commissioning of Vertical Turbine Oil lubricated Raw water pump to lift 3600 LPM discharge at 22 m head complete with 20 m column assembly , 30 HP VSS squirrel cage induction motor B class insulation with reversible ratchet, chuck nutsuitable to operate on 415 volt (±10%) , 3 Phase 50 HZ AC supply. (Synchronous Speed 1450 RPM) 152 3600 LPM, 30 HP, 22 m Head, 1450 RPM 153 A) MAIN PIPING-Supply of CIDF 250 mm Main piping required for delivery side, 300 mm common Header upto 1 m outside with 3 Nos 300x300x250 mm size Tee and 1 Nos 300x300x250 mm size Tee forbye pass arrangement ofthe pump housealong withall necessarydismantaling joints in delivery and common header, enlarger , reducer nuts, bolts, rubber packing ,tools etc. complete in all respect as per site conditions .L.S. 154 B) VALVES- 155 a) Supply of following size motor operated actuaters with DI sluice valves 156 i) 250 mm size 157 ii) 300 mm size 158 b) Supply of following size DI Non Return Valves 159 i) 250 mm size 160 ii) 300 mm size 161 Sypply of CE/UL Certified Electromagnetic flow meter 162 (i) Electromagnetic flow meter of size 300 mm 163 ELECTRICAL ITEMS: 164 Supply of 3.5 core 120 Sq.mm. Armoured Aluminum Conductor Cable From LTControl Panelto MCC panel with lugs etc.including laying wiyh cable tray and required 165 Auto Phase reversal unit / Automatic switch with inbuilt the delay & enclosure (Confirms to IEC: 60947-1 & IEC: 60947-6-1) of followint rating: 166 (i) 160 Amp. 167 Supply of dust and vermin proof MotorControl panel consisting of one no. incoming of 320 Amp MCCB and 4 Nos. (3+1)100 Ampand 2 Nos 63 amp outgoing MCCB Mirco processor based completesuitable to operate on 415±6 %volt , 3 phase , 50 Hz, AC supply with CTS, PT, AVF meter, PF meter, Relays and protective devicecomplete in all respect. individual motors 168 Supply of 3 core 35 Sq.mm. Armoured Copper Conductor Cable from MCC panel to respective motors with lugs etc. 169 Supply of 30 HP (22 KW) digital Soft Starter with RS485 port - 400 V class. 170 CE/UL Certified Pressure Transmitter for each pump and common header 171 CE/UL Certified Radar type Level Transmiter for Intake well. 172 CE/UL Certified Surge protector for control panel 173 Double Plate Earthing of complete Pumping Station (as per IER/IS) including civil works and all material, separate double earthing for each equipment shall be carried out. 174 HOT of 3 Ton capacity, 10 mtr span , 12 mtr lift with traveling trolly 175 Spare of Pumping Plant as impeller, bowl bearings, wear rings etc 176 Tools 177 10 mm Thickness Electrical resistance sheet 178 Cable trench Chequerred plate 6 mm thickness, angle and C Chanel etc. 179 Fire fighting equipments such as four nos. fire extinguishers CO2/ ABC type. 180 Internal & External electrification and lighting of pumping station. 181 Painting Works 182 Installation, Testing and Commissioning of all equipments and pumping plants etc complete in all respect. 183 Main CWR Pumping Plant. 184 FOR MES 185 PUMPING PLANTS: 186 Supply of Vertical Turbine water lubricated Clear Water Pump with 4.5 mt column assembly along with VHS / VSS squirrel cageinduction motor complete with ratchet arragment chucknut and top shaft locking arragment with following specifications. 187 2500 LPM, 15 HP, 10 m Head, 1450 RPM 188 A) MAIN PIPING- Supply of 200 mm CIDF Main piping required for delivery side, 250 mm common Header upto 1 m outside with 3 Nos 250x250x200 mm size Tee and 1 Nos 250x250x200 mm size Tee forbye pass arrangement ofthe pump house along withall necessary enlarger , dismantaling joints ,reducer nuts, bolts, rubber packing, tools etc. complete in all respect as per site conditions .L.S. 189 B) VALVES- 190 a) Supply of following size motor operated actuaters with sluice valves 191 i) 200 mm size 192 ii) 250 mm size 193 b) Supply of following size Non Return Valves 194 i) 200 mm size 195 ii) 250 mm size 196 CE/UL Certified Electromagnetic flow meter 197 (i) Electromagnetic flow meter of size 250 mm for CWR outlet 198 Chlorine Analyser with MODBUS RTU having Following specification - (a) FRC senser range 0-5 ppm (b) Analyser with RS 485 O/P suitable toMES distribution line and compatible with SCADA system too. 199 ELECTRICAL ITEMS: 200 Supply of 3.5 core 50 Sq.mm. Armoured Aluminum Conductor Cable from LT Panelto MCC Panel with lugs etc. 201 Auto Phase reversal unit / Automatic switch with inbuilt the delay & enclosure (Confirms to IEC: 60947-1 & IEC: 60947-6-1) of followint rating: 202 (i) 100 Amp. 203 Supply of dust and vermin proofMCC Panel consisting of 1Noincoming Mirco processor based MCCB of 160 Amp and 4 Nos. (3+1) outgoing MCCB of 63 Amp , 2 No 63 Amp MCCB Mirco processor based for Lighting /Sparecompletesuitable to operate on 415±6 %volt , 3 phase , 50 Hz, AC supply with CTS, PT, AVF meter, PF meter, Relays and protective devicecomplete in all respect. individual motors. 204 Supply of 3 core 25 Sq.mm. Armoured Copper Conductor Cable from MCC panel to respective motors with lugs etc. 205 Supply of 15HP (11 KW) digital Soft Starter with RS485 port - 400 V class. 206 CE/UL Certified Pressure Transmitter for each pump and common header 207 CE/UL Certified Radar type Level Transmiter for CWR 208 CE/UL Certified Surge protector for control panel 209 Double Plate Earthing of complete Pumping Station (as per IER/IS) including civil works and all material, separate double earthing for each equipment shall be carried out. 210 3Ton capacity hand operated overhead travelling (HOT) crane suitable for span up to 6 mtrs and travelling length upto 10 mtrs with clear lift up to 6 mtrs including gear type chain pulley block and geared travelling trolley complete with all accessories including girder. 211 Spare of Pumping Plant as impeller, bowl bearings, wear rings etc 212 Tools 213 10 mm Thickness Electrical resistance sheet 214 Cable trench Chequerred plate 6 mm thickness, angle and C Chanel , angle etc. 215 Fire fighting equipments such as four nos. fire extinguishers CO2 type. 216 Internal & External electrification and lighting of pumping station. 217 Painting Works 218 Installation, Testing and Commissioning of all above equipments and pumping plants etc complete in all respect. 219 FOR C.P. TANK 220 PUMPING PLANTS: 221 Supply of Vertical Turbine water lubricated Clear Water Pump with 4.5 mt column assembly along with VHS / VSS squirrel cageinduction motor complete with ratchet arragment chucknut and top shaft locking arragment with following specifications. 222 2000 LPM, 40 HP, 51 m Head, 1450 RPM 223 A) MAIN PIPING- Supply of 200 mm CIDF Main piping required for delivery side, 250 mm common Header upto 1 m outside with 3 Nos 250x250x200 mm size Tee and 1 Nos 250x250x200 mm size Tee forbye pass arrangement ofthe pump house along withall necessary enlarger , dismantaling joints ,reducer nuts, bolts, rubber packing etc. complete in all respect as per site conditions .L.S. 224 B) VALVES- 225 a) Supply of following size motor operated actuaters with sluice valves 226 i) 200 mm size 227 ii) 250 mm size 228 iii) 300 mm Size for CP tank outlet 229 b) Supply of following size Non Return Valves 230 i) 200 mm size 231 ii) 250 mm size 232 CE/UL Certified Electromagnetic flow meter 233 (i) Electromagnetic flow meter of size 250 mm for CWR outlet 234 ELECTRICAL ITEMS: 235 Supply of 3.5 core 95 Sq.mm. Armoured Aluminum Conductor Cable from LT Panelto MCC Panel with lugs etc. 236 Auto Phase reversal unit / Automatic switch with inbuilt the delay & enclosure (Confirms to IEC: 60947-1 & IEC: 60947-6-1) of followint rating: 237 (i) 160 Amp. 238 Supply of dust and vermin proofMCC Panel consisting of 1Noincoming Mirco processor based MCCB of 500 Amp and 4 Nos. (3+1) outgoing MCCB of 125 Amp , 2 No 63 Amp MCCB Mirco processor based for Lighting /Sparecompletesuitable to operate on 415±6 %volt , 3 phase , 50 Hz, AC supply with CTS, PT, AVF meter, PF meter, Relays and protective devicecomplete in all respect. individual motors . 239 Supply of 3 core 35 Sq.mm. Armoured Copper Conductor Cable from MCC panel to respective motors with lugs etc. 240 Supply of 40HP (30 KW) digital Soft Starter with RS485 port - 400 V class. 241 CE/UL Certified Pressure Transmitter for each pump and common header 242 CE/UL Certified Radar type Level Transmiter for CWR 243 CE/UL Certified Surge protector for control panel 244 Double Plate Earthing of complete Pumping Station (as per IER/IS) including civil works and all material, separate double earthing for each equipment shall be carried out. 245 3Ton capacity hand operated overhead travelling (HOT) crane suitable for span up to 6 mtrs and travelling length upto 10 mtrs with clear lift up to 6 mtrs including gear type chain pulley block and geared travelling trolley complete with all accessories including girder. 246 Spare of Pumping Plant as impeller, bowl bearings, wear rings etc 247 Tools 248 10 mm Thickness Electrical resistance sheet 249 Cable trench Chequerred plate 6 mm thickness, angle and C Chanel , angle etc. 250 Fire fighting equipments such as four nos. fire extinguishers CO2 type. 251 Internal & External electrification and lighting of pumping station. 252 Painting Works 253 Installation, Testing and Commissioning of all above equipments and pumping plants etc complete in all respect. 254 ZONAL CWR 255 ZONE -1 +KANSIRAM YOJNA + LOHIYA AAWAS YOJNA 256 PUMPING PLANTS: 257 Supply of Vertical Turbine water lubricated Clear Water Pump with 4.5 mt column assembly along with VHS / VSS squirrel cageinduction motor complete with ratchet arragment chucknut and top shaft locking arragment with following specifications. 258 900 LPM, 15 HP, 40 m Head, 1450 RPM 259 A) MAIN PIPING- Supply of 100 mm CIDF Main piping required for delivery side, 150 mm common Header upto 1 m outside with 3 Nos 150x150x100 mm size Tee and 1 Nos 150x150x150 mm size Tee for branch ofKansiram Yojna OHT + Lohiya Aawas yojna OHTand also 1 Nos 150x150x150 mm size Tee for bye pass arrangement ofthe pump house along withall necessary enlarger , dismantaling joints ,reducer nuts, bolts, rubber packing, tools etc. complete in all respect as per site conditions .L.S. 260 B) VALVES- 261 a) Supply of following size motor operated actuaters with sluice valves 262 i) 100 mm size 263 ii) 150 mm size 264 iii) 300 mm size at OHT Zone-1 Outlet 265 iv) 100 mm size at OHT Kansiram Yojna and Lohiya Aawas Yojna outlet 266 b) Supply of following size Non Return Valves 267 i) 100 mm size 268 ii) 150 mm size 269 CE/UL Certified Electromagnetic flow meter 270 (i) Electromagnetic flow meter of size 150 mm for CWR outlet 271 (ii) Electromagnetic flow meter of size 300 mm for OHT Zone-1 outlet 272 (iii) Electromagnetic flow meter of size 100 mm for OHT outlet of Kansiram Yojna and Lohiya Aawas Yojna 273 Chlorine Analyser with MODBUS RTU having Following specification - (a) FRC senser range 0-5 ppm (b) Analyser with RS 485 O/P suitable to OHT distribution line and compatible with SCADA system too. 274 ELECTRICAL ITEMS: 275 Supply of 3.5 core 50 Sq.mm. Armoured Aluminum Conductor Cable from LT Panelto MCC Panel with lugs etc. 276 Auto Phase reversal unit / Automatic switch with inbuilt the delay & enclosure (Confirms to IEC: 60947-1 & IEC: 60947-6-1) of followint rating: 277 (i) 100 Amp. 278 Supply of dust and vermin proofMCC Panel consisting of 1Noincoming Mirco processor based MCCB of 500 Amp and 4 Nos. (3+1) outgoing MCCB of 100 Amp , 2 No 63 Amp MCCB Mirco processor based for Lighting /Sparecompletesuitable to operate on 415±6 %volt , 3 phase , 50 Hz, AC supply with CTS, PT, AVF meter, PF meter, Relays and protective devicecomplete in all respect. individual motors . 279 Supply of 3 core 25 Sq.mm. Armoured Copper Conductor Cable from MCC panel to respective motors with lugs etc. 280 Supply of 15 HP (11 KW) digital Soft Starter with RS485 port - 400 V class. 281 CE/UL Certified Pressure Transmitter for each pump and common header 282 CE/UL Certified Radar type Level Transmiter for CWR for all zone. 283 CE/UL Certified level transmitter for all above OHT 284 CE/UL Certified Surge protector for control panel 285 Double Plate Earthing of complete Pumping Station (as per IER/IS) including civil works and all material, separate double earthing for each equipment shall be carried out. 286 3Ton capacity hand operated overhead travelling (HOT) crane suitable for span up to 6 mtrs and travelling length upto 10 mtrs with clear lift up to 6 mtrs including gear type chain pulley block and geared travelling trolley complete with all accessories including girder. 287 Spare of Pumping Plant as impeller, bowl bearings, wear rings etc 288 Tools 289 10 mm Thickness Electrical resistance sheet 290 Cable trench Chequerred plate 6 mm thickness, angle and C Chanel , angle etc. 291 Fire fighting equipments such as four nos. fire extinguishers CO2/ ABC type. 292 Internal & External electrification and lighting of pumping station. 293 Painting Works 294 Installation, Testing and Commissioning of all above equipments and pumping plants etc complete in all respect. 295 ZONE -II 296 PUMPING PLANTS: 297 Supply of Vertical Turbine water lubricated Clear Water Pump with 4.5 mt column assembly along with VHS / VSS squirrel cage induction motor complete with ratchet arragment chucknut and top shaft locking arragment with following specifications. 298 1100 LPM, 25 HP, 55 m Head, 1450 RPM 299 A) MAIN PIPINGSupply of 150 mm CIDF Main piping required for delivery side, 200 mm common Header upto 1 m outside with 3 Nos 200x200x150 mm size Tee and 1 Nos 200x200x150 mm size Tee forbye pass arrangement ofthe pump house along withall necessary enlarger , dismantaling joints ,reducer nuts, bolts, rubber packing etc. complete in all respect as per site conditions .L.S. 300 B) VALVES- 301 a) Supply of following size motor operated actuaters with sluice valves 302 i) 150 mm size 303 ii) 200 mm size 304 iii) 300 mm size at OHT Outlet 305 b) Supply of following size Non Return Valves 306 i) 150 mm size 307 ii) 200 mm size 308 CE/UL Certified Electromagnetic flow meter 309 (i) Electromagnetic flow meter of size 200 mm for CWR outlet 310 (ii) Electromagnetic flow meter of size 300 mm for OHT outlet 311 Chlorine Analyser with MODBUS RTU having Following specification - (a) FRC senser range 0-5 ppm (b) Analyser with RS 485 O/P suitable to OHT distribution line and compatible with SCADA system too. 312 ELECTRICAL ITEMS: 313 Supply of 3.5 core 70 Sq.mm. Armoured Aluminum Conductor Cable from LT Panelto MCC Panel with lugs etc. 314 Auto Phase reversal unit / Automatic switch with inbuilt the delay & enclosure (Confirms to IEC: 60947-1 & IEC: 60947-6-1) of followint rating: 315 (i) 160 Amp. 316 Supply of dust and vermin proofMCC Panel consisting of 1Noincoming Mirco processor based MCCB of 250 Amp and 4 Nos. (3+1) outgoing MCCB of 125 Amp , 2 No 63 Amp MCCB Mirco processor based for Lighting /Sparecomplete with power wiring, Ampire meter, Voltmeter etc. 317 Supply of 3 core 35 Sq.mm. Armoured Copper Conductor Cable from MCC panel to respective motors with lugs etc. 318 Supply of 25 HP (18.5 KW) digital Soft Starter with RS485 port - 400 V class. 319 CE/UL Certified Pressure Transmitter for each pump and common header 320 CE/UL Certified level transmitter for OHT 321 CE/UL Certified Surge protector for control panel 322 Double Plate Earthing of complete Pumping Station (as per IER/IS) including civil works and all material, separate double earthing for each equipment shall be carried out. 323 3Ton capacity hand operated overhead travelling (HOT) crane suitable for span up to 6 mtrs and travelling length upto 10 mtrs with clear lift up to 6 mtrs including gear type chain pulley block and geared travelling trolley complete with all accessories including girder. 324 Spare of Pumping Plant as impeller, bowl bearings, wear rings etc 325 Tools 326 10 mm Thickness Electrical resistance sheet 327 Cable trench Chequerred plate 6 mm thickness, angle and C Chanel , angle etc. 328 Fire fighting equipments such as four nos. fire extinguishers CO2/ABC type. 329 Internal & External electrification and lighting of pumping station. 330 Painting Works 331 Installation, Testing and Commissioning of all above equipments and pumping plants etc complete in all respect. 332 INTAKE WELL SUB STATION (100 KVA) 333 Supply of 2mm thick MS Sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control panel comprising of 1 No. incoming V.C.B.(630 Amp) and 2 Nos. outgoing V.C.B. panel with all accessories and protective devices suitable for 100 KVA 2 Nos.11/0.4 KVtransformers. 334 Supply of70 Sq.mm size XLPE cable from 11 K.V.UPPCL metering panel to 11 KV incoming H.T. switch gear panel and panel to transformer. 335 Supply InstallationTesting and Commissioning of 100 KVA 11/0.433 KV 50 Hz Copper woundoil cooled Transformer withoff load tap changer from +7.5% to -15% LV side @ 2.5 % step vectore group Dy11 as per IS 1180, 2014 Part 1 Level 1 effecient with neccessory saefty devices . 336 Supply of 14 SWG CRCA MS sheet fabricated factory wired, floor mounting type L.T. panel comprising of following.L.T. panel comprising of 3 Nos. incomer 320 Amp Microprocessor based MCCB draw out type and 1Nos. outgoing Microprocessor based MCCB of 320 Amp and1 no. outgoing 63Amp MCCB or suitable capacity for auxiliary lighting / spare suitable to operate on 415±6 %volt , 3 phase , 50 Hz, AC supply with CTS, PT, AVF meter, PF meter, Relays and protective devicecomplete in all respect. 337 Supply of 50 kvar APFC panel suitable for above LT panel with all necessary metering and protective devices complete in all respect. 338 Supply and laying of 1100 volt grade 95 sq mm 3½ core PVC Armored Aluminum cable from transformer to L.Tpanel (2x3½x70 sq mm) 339 Making earth pit for Earthing system shall executed as per IS: 3043 and I.E. rules. 340 Installationtesting and commissioning of 11 KV/0.4 KV substations including Transformers, HT Panels and L.T. main control panel including all labor T&P complete in all respect. 341 Supply and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugsof 70 sq mm size 3 core XLPE aluminium conductor cable of 11 kv grade. 342 Supply and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugsof 70 sq mm size 3 core XLPE aluminium conductor cable of 11 kv grade. 343 Provision for routine testing of equipments such as transformer, HT Panels and Main LT Panel at manufacturer’s works. 344 19 mm Thickness Electrical resistance sheet 345 Cable trench Chequerred plate 6 mm thickness, angle and C Chanel etc. 346 Fire fighting equipments such as four nos. fire extinguishers CO2 type and fire bucket with stand 347 Internal & External electrification of sub station 348 NOC from Electrical safety department for all field installations such as pumping plants, substation etc. 349 SITC of 1 No DG set of Capacity100 KVA , 415 ± 10% V with AMF Control Panel, cabling, earthingetc. Complete in all respect. 350 SUB STATION OF WTP + MAIN CWR (400 KVA) 351 Supply of 2mm thick MS Sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control panel comprising of 1 No. incoming V.C.B.(630 Amp) and 2 Nos. outgoing V.C.B. panel with all accessories and protective devices suitable for 400 KVA 2 Nos.11/0.4 KVtransformers. 352 Supply of120 Sq.mm size XLPE cable from 11 K.V.UPPCL metering panel to 11 KV incoming H.T. switch gear panel and panel to transformer. 353 Supply InstallationTesting and Commissioning of 400 KVA 11/0.433 KV 50 Hz Copper woundoil cooled Transformer withoff load tap changer from +7.5% to -15% LV side @ 2.5 % step vectore group Dy11 as per IS 1180, 2014 Part 1 Level 1 effecient with neccessory saefty devices . 354 Supply of 14 SWG CRCA MS sheet fabricated factory wired, floor mounting type L.T. panel comprising of following.L.T. panel comprising of 3 Nos. incomer 800 Amp Microprocessor based ACB draw out type and 1Nos. outgoing Microprocessor based ACB of 800 Amp and1 no. outgoing 63Amp MCCB or suitable capacity for auxiliary lighting / spare suitable to operate on 415±6 %volt , 3 phase , 50 Hz, AC supply with CTS, PT, AVF meter, PF meter, Relays and protective devicecomplete in all respect. 355 Supply of 175 kvar APFC panel suitable for above LT panel with all necessary metering and protective devices complete in all respect. 356 Supply and laying of 1100 volt grade 300 sq mm 3½ core PVC Armored Aluminum cable from transformer to L.Tpanel (2x3½x300 sq mm) 357 Making earth pit for Earthing system shall executed as per IS: 3043 and I.E. rules. 358 Installationtesting and commissioning of 11 KV/0.4 KV substations including Transformers, HT Panels and L.T. main control panel including all labor T&P complete in all respect. 359 Supply and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugsof 70 sq mm size 3 core XLPE aluminium conductor cable of 11 kv grade. 360 Supply and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugsof 120 sq mm size 3 core XLPE aluminium conductor cable of 11 kv grade. 361 Provision for routine testing of equipments such as transformer, HT Panels and Main LT Panel at manufacturer’s works. 362 19 mm Thickness Electrical resistance sheet 363 Cable trench Chequerred plate 6 mm thickness, angle and C Chanel etc. 364 Fire fighting equipments such as four nos. fire extinguishers CO2 type and fire bucket with stand 365 Internal & External electrification of sub station 366 NOC from Electrical safety department for all field installations such as pumping plants, substation etc. 367 SITC of 1 No DG set of Capacity320 KVA , 415 ± 10% V with AMF Control Panel, cabling, earthingetc. Complete in all respect. 368 SUB STATIONOF ZONAL CWR (160 KVA) 369 Supply of 2mm thick MS Sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control panel comprising of 1 No. incoming V.C.B.(630 Amp) and 2 Nos. outgoing V.C.B. panel with all accessories and protective devices suitable for 160 KVA 2 Nos.11/0.4 KVtransformers. 370 Supply of70 Sq.mm size XLPE cable from 11 K.V.UPPCL metering panel to 11 KV incoming H.T. switch gear panel and panel to transformer. 371 Supply InstallationTesting and Commissioning of 160 KVA 11/0.433 KV 50 Hz Copper woundoil cooled Transformer withoff load tap changer from +7.5% to -15% LV side @ 2.5 % step vectore group Dy11 as per IS 1180, 2014 Part 1 Level 1 effecient with neccessory saefty devices . 372 Supply of 14 SWG CRCA MS sheet fabricated factory wired, floor mounting type L.T. panel comprising of following.L.T. panel comprising of 2 Nos. incomer 400 Amp Microprocessor based MCCB draw out type and 1Nos. outgoing Microprocessor based MCCB of 400 Amp and2 no. outgoing 63Amp MCCB or suitable capacity for auxiliary lighting / spare suitable to operate on 415±6 %volt , 3 phase , 50 Hz, AC supply with CTS, PT, AVF meter, PF meter, Relays and protective devicecomplete in all respect. 373 Supply of 75 kvar APFC panel suitable for above LT panel with all necessary metering and protective devices complete in all respect. 374 Supply and laying of 1100 volt grade 95 sq mm 3½ core PVC Armored Aluminum cable from transformer to L.Tpanel (2x3½x70 sq mm) 375 Making earth pit for Earthing system shall executed as per IS: 3043 and I.E. rules. 376 Installationtesting and commissioning of 11 KV/0.4 KV substations including Transformers, HT Panels and L.T. main control panel including all labor T&P complete in all respect. 377 Supply and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugsof 70 sq mm size 3 core XLPE aluminium conductor cable of 11 kv grade. 378 Supply and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugsof 70 sq mm size 3 core XLPE aluminium conductor cable of 11 kv grade. 379 Provision for routine testing of equipments such as transformer, HT Panels and Main LT Panel at manufacturer’s works. 380 19 mm Thickness Electrical resistance sheet 381 Cable trench Chequerred plate 6 mm thickness, angle and C Chanel etc. 382 Fire fighting equipments such as four nos. fire extinguishers CO2 type and fire bucket with stand 383 Internal & External electrification of sub station 384 NOC from Electrical safety department for all field installations such as pumping plants, substation etc. 385 Automation of Intake Well 386 ForIntake Well 387 CE & UL Certified PLC/RTUwith redundantCPU & Powersupplyin IP 54 enclose suitable to Communicate with GSM based modem unit withredundant CPU & Powersupply with annlog & digital parameter & featuers as specified, for each Intakewell to store and transmit dataon GSM backbone, RTU/PLC desgined with logic to transfer data at multiple stations with control panel as specified intender technical specifications. 388 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories include with signal enhancer antenna made for pumping plant internetcharges as specified in tender technical specification . 389 Intelligent energy meters 390 Control Panel with IP 54 Protection, Industrial Grade for all equipment. (Separate for control (24 V) and power equipments.) upto 3 pumps. 391 CE/ UL Certified 7 HMI touch screen suitable to communication with PLC/RTU for local display & control of process parameters. 392 Cabling 393 Complete Cabling for Intake well including all power & control cable of all equipments at ZPS and OHT. 394 Security Survelliance IP Camera with recorder 395 Automation of Main CWR 396 ForMain CWR 397 CE & UL Certified PLC/RTUwith redundantCPU & Powersupplyin IP 54 enclose suitable to Communicate with GSM based moden unit withredudant CPU & Powersupply with annlog & digital parameter & featuers as specified, for each ZPS/OHT to store and transmit dataon GSM backbone, RTU/PLC desgined with logic to transfer data at multiple stations with control panel as specified intender technical specifications. 398 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories include with signal enhancer antenna made for pumping plant internetcharges as specified in tender technical specification . 399 Intelligent energy meters 400 Control Panel with IP 54 Protection, Industrial Grade for all equipment. (Separate for control (24 V) and power equipments.) upto 3 pumps. 401 CE/ UL Certified 7 HMI touch screen suitable to communication with PLC/RTU for local display & control of process parameters. 402 Cabling 403 Complete Cabling for Pumping Plant including all power & control cable of all equipments at ZPS and OHT. 404 Security Survelliance IP Camera with recorder 405 Automation of ZONAL CWR 406 ForZONAL CWR 407 CE & UL Certified PLC/RTUwith redundantCPU & Powersupplyin IP 54 enclose suitable to Communicate with GSM based moden unit withredudant CPU & Powersupply with annlog & digital parameter & featuers as specified, for each ZPS/OHT to store and transmit dataon GSM backbone, RTU/PLC desgined with logic to transfer data at multiple stations with control panel as specified intender technical specifications. 408 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories include with signal enhancer antenna made for pumping plant internetcharges as specified in tender technical specification . 409 Intelligent energy meters 410 Control Panel with IP 54 Protection, Industrial Grade for all equipment. (Separate for control (24 V) and power equipments.) 411 CE/ UL Certified 7 HMI touch screen suitable to communication with PLC/RTU for local display & control of process parameters. 412 Cabling 413 Complete Cabling for pumping plantincluding all power & control cable of all equipments at ZPS and OHT. 414 Security Survelliance IP Camera with recorder 415 Master Control Station (MCS) 416 SCADA DISPLAY 417 CE/UL & BIS Certified industrial grade LED MONITOR with latest configrutation as per specification 418 (i)65 419 Desktop/PC with i5/i7 processor for as per specification mentioned in technicalbid documents. 420 CE/UL Certified 5KVA UPS with batteries as per specification mentioned in technical bid document. 421 CE/UL Certified master control room PLC with redundant CPU & power supply at MCS in IP54 - enclouser as spec mentioned in technical bid documents. 422 CE/UL Certified Field gateway agent for transfering data from MCS to Central control room. 423 GSM based wireless /Broadband/Equipment communication system for PLC capable to transfer & received data & gather dat from remote sites to control station,All accessories included signal enhancer antenna along with running expenses till DLP. 424 CE/UL Certified Firewall for network protection. 425 SURGE PROTECTOR FOR ETHERNET Communication protection. 426 CE/UL certified industrial grade Ethernet Switch. 427 Mobile App Facility system architecture(Industries internet based & viewed through mobile apps for increased local & Remote Visibility). 428 Canon/HP or equivalent Laser Printer 1018 or equivement. 429 Security Surveillance IP camera with recorder (optional) 430 Installation, Commissioning & testing including required furniture A/c etc. 431 Trial run for 3 month period 432 TRAIL & RUN 433 Operation Charges for 03 Months Trial & Run for above TWS & CWRS
|
