|
Tall Cabinet With Key, Bp Coating, Minimum Dimensions 91 , Dining Table Set With 6 Chairs, Consisting Of A Rectangular Table 180 Cm Long, Made Of Hardwood And Formicada (Color To Be Defined By The Organization) And Six Chairs With Upholstered Seat And Back In Cross Wood. Perfect Finish In Cinnamon Brown Pattern Or Oregon Brown Pattern. Measurements: Table - Width: 180 Cm, Height: 78 Cm, Depth: 78 Cm. Chairs - Width: 42 Cm, Height: 100 Cm, Depth: 51 Cm. Supported Weight Of Chairs (Approximate): 150 Kg., Printer Table, Made Of Wood, Multilaminated Plywood Covered In Melamine; Steel Structure With Previous Treatment And Black Epoxy Painting; Edges Protected With Black Pvc Profile; Measuring At Least 0.50M Wide, 0.45M Deep And 0.70M High; Minimum 12 (Twelve) Months Warranty., (Side Of Credenza To Be Defined Upon Purchase) Measurements: Table: Width: 2200/2460Mm X Depth: 900Mm Made From Mdp Sheet (Medium Density Particleboard), With Selected Reforestation Wood Particles, Bonded And Consolidated With Synthetic And Thermo-Resin Stabilized Under Pressure, 40Mm Thick, With A 25Mm Sheet Glued To A 15Mm Thick Sheet, Coated On Both Sides With Thermo-Pressed Melamine Film, With A Minimum Thickness Of 0.2Mm. The Contour Of The Top Is Topped With A 2Mm Pvc (Polyvinyl Chloride) Edge, Hot-Glued Using The Cq-645Pur Hotmelt System, Which Is Made From Reactive Polyurethane (Pur) Which Is In Contact With The Relative Humidity Of The Air And/Or The Substrates_X000d_Starts Its Reticulation, Becoming A Highly Flexible Thermo-Fixed Adhesive In White, With A Radius Of 2 Mm. Side Panels Made From Mdp (Medium Density Particleboard), With A Minimum Thickness Of 0.2Mm. The Contour Of The Panels Is Topped With A 2Mm Pvc (Polyvinyl Chloride) Edge, Hot-Glued Using The Cq-645Pur Hotmelt System, Which Is Made From Powder..., Tops Made Of Mdp (Medium Density Particleboard), Being A Sheet Of 25Mm Glued On A_X000d_Plate 15Mm Thick, 2Mm. The Contour Of The Top Is Topped With A 2Mm Pvc (Polyvinyl Chloride) Edge, Hot Glued Using The Cq645pur Hotmelt System, Which Is Made From Reactive Polyurethane (Pur) Which, When In Contact With The Relative Humidity Of The Air And/Or The Substrates, Initiates Its Crosslinking , Being The Same With A Radius Of 2 Mm. Profiles Composed Of 6360 Aluminum Alloy With Automotive Liquid Paint Finish Are Fixed Between The Tops. Side Panels Made From Mdp (Medium Density Particleboard), Coated On Both Sides With Melamine Thermo-Pressed Film, 2Mm. The Contour Of The Panels Is Topped With A 2Mm Pvc (Polyvinyl Chloride) Edge, Hot-Glued Using The Cq645pur Hotmelt System, Which Is Made From Reactive Polyurethane (Pur) Which Comes Into Contact With Relative Humidity, 07/05/2024
|
