|
Tender For Various 11 Kv Line/Substations, Dtr, Ptr Augmentation Etc. Works Under Business Plan 2024-25 In The Area Of Edc Ii, Mathura On Semi Turnkey Basis, 1 Supply of following material against various 11kv Lines/Sub-station, DTR, PTR augmentation etc. works as per RESPO Drawings/approved GTP/standard technical specifications 2 Stone Pad 3 Tee channel with clamp & B&N 4 Clamps for Tee Channel 5 F Bracket 6 Holding Clamp for (Cross Arm) 7 Complete Pole earthing by earth rod. 8 M.S. Angle Iron 75*75*8 9 Guarding Angle 75*75*8 10 Guarding Angle Clamp With NB 11 GI Wire 6swg 12 GI Wire 8swg 13 Danger Board With Clamp, N/B 14 Barbed Wire GI 6 swg 15 Number Plate 6*8 inches, painted with enemal paint, yellow base and black numbering 16 Top channel (125x65x2240mm) 17 Dropper Channel (100x50x2028mm) 18 MS Bracing Angle 19 Clamp for PCC with nut & Bolt 20 PG Clamp 21 Nut & Bolt with washer 22 Tee-off channeal with clamp & B&N 23 Stay Complete 24 3-Phase D.O. Fuse Set 25 Tail less unit complete with Structure for 63/100 KVA TF 26 M.S. Angle (75x75x6x2028mm) (T/F Base) 27 TF Clamp with Bolt nut 28 LT Shackle insulator 29 LT Clamp with Bolt nut 30 Eye Hook with Eye Bold AB Conductor 31 Piercing Connector 32 Distribution Box-3 Phase 33 Distribution Box Holding Clamp 34 Suspenstion Clamp 35 Copper L Piece 50*50*6 MM 36 3 Phase 11 kv DO Fuse Set Heavy Duty. 37 ACSR Insulated Weasal for jumpering 38 LT Protection Panel with 3 No. of Ckt by stud type tell less fuse unit compatable for installation of MCCB 1000 Amp. 39 All lugs 400 sqmm 40 Clamp angle for panel mounting support 41 L.T. XLPE Cable of size 3.5 x 240 Sqmm 42 L.T. XLPE Cable of size 3.5 x 150 Sqmm 43 L.T.XLPE Cable of size 3.5 x 120 Sqmm 44 Double Through Double Pole TPMO to be Mounted on Double Pole 45 LT Protection pannel with 03 No. of ckt by Stud type tell less fuse unit, Compatable for installtion of MCCB 400 Amp 4 pole 46 1x400 Sqmm LT PVC cable Single core 47 1x630 Sqmm LT PVC cable Single core 48 All Lugs 150 Sqmm 49 Supply, Heavy duty Connector (torque controlled shear bolted coppoer connector) (as per respo norms and of different sizes) 50 Fixing, erection and commissioning work of following material for various 11kv Line/Sub-station, DTR, PTR augmentation etc. works as per RESPO Drawings/Estimates. Work includes all cartage/carriage, T&P, and any other work which is required for completion of above said work as per satisfaction of supervisory engineer. 51 PCC Pole 8.5 Mtr. Long 52 ACSR Weasel Conductor 53 ACSR Rebbit Conductor 54 11 Kv Pin Insulator With Pins 55 11 Kv Polymer Disk Isulator 45 KN 56 11 kv VCB 600/300/5A, 350 MVA 57 11 kv VCB O/G 200/100/5A, 350 MVA 58 11 Kv XLPE Cable 3x300 sqmm 59 11 kv XLPE Cable 3x185 sqmm 60 11 kv out Door Jointing Kit 3*185 sqmm. 61 11 kv In Door Jointing Kit 3*185 sqmm. 62 T/F KVA 100 KVA Additional 63 T/F KVA 63 KVA Additional 64 T/F KVA 16 KVA Additional 65 ABC 3x95 Sq. mm cable 66 1x400 Sqmm LT PVC Cable Singel Core 67 Increasing Transformer 250 KVA (100 kva to 250 kva) 68 Increasing Transformer 100 KVA (63 kva to 100 kva)only commissioning and other related works are to be done, carriage of transformer is not to be done 69 Increasing Transformer 63 KVA (25 kva to 63 kva)only commissioning and other related works are to be done, carriage of transformer is not to be done 70 11KV XLPE CABLE SIZE 3*70 71 11/0.4KV 400KVA (COPPER wind) TF complete installation on trolly 72 11KV XLPE JOINTING KIT OUTDOOR 3*70 73 Double Through Double Pole TPMO to be Mounted on Double Pole 74 LT Protection pannel with 03 No. of ckt by Stud type tell less fuse unit, Compatable for installtion of MCCB 400 Amp 4 pole 75 1x400 Sqmm LT PVC cable Single core 76 All Lugs 150 Sqmm 77 Installation, Heavy duty Connector (torque controlled shear bolted connector) 78 Stone Pad 79 Tee channeal with clamp & B&N 80 Clamps for Tee Channel 81 F Bracket 82 Holding Clamp for (Cross Arm) 83 Complete Pole earthing by earth rod. 84 M.S. Angle Iron 75*75*8 85 Guarding Angle 75*75*8 86 Guarding Angle Clamp With NB 87 GI Wire 6swg 88 GI Wire 8swg 89 Danger Board With Clamp, N/B 90 Barbed Wire GI 6 swg 91 Number Plate 6*8 inches, painted with enemal paint, yellow base and black numbering 92 Top channel (125x65x2240mm) 93 Dropper Channel (100x50x2028mm) 94 MS Bracing Angle 95 Clamp for PCC with nut & Bolt 96 PG Clamp 97 Nut & Bolt with washer 98 Tee-off channeal with clamp & B&N 99 Stay Complete 100 3-Phase D.O. Fuse Set 101 Tail less unit complete with Structure for 63/100 KVA TF 102 M.S. Angle (75x75x6x2028mm) (T/F Base) 103 TF Clamp with Bolt nut 104 LT Shackle insulator 105 LT Clamp with Bolt nut 106 Eye Hook with Eye Bold AB Conductor 107 Piercing Connector 108 Distribution Box-3 Phase 109 Distribution Box Holding Clamp 110 Suspenstion Clamp 111 Copper L Piece 50*50*6 MM 112 3 Phase 11 kv DO Fuse Set Heavy Duty. 113 ACSR Insulated Weasal for jumpering 114 LT Protection Panel with 3 No. of Ckt by stud type tell less fuse unit compatable for installation of MCCB 1000 Amp. 115 All lugs 400 sqmm 116 Clamp angle for panel mounting support 117 L.T. XLPE Cable of size 3.5 x 240 Sqmm 118 L.T. XLPE Cable of size 3.5 x 150 Sqmm 119 L.T.XLPE Cable of size 3.5 x 120 Sqmm 120 GI Wire Chain Link Net for fencing Mesh D Fence Wire with foldable Gateheight 1.52Mtr 121 LT Protection pannel with 03 No. of ckt by Stud type tell less fuse unit, Compatable for installtion of MCCB 400 Amp 4 pole 122 1x400 Sqmm LT PVC cable Single core 123 1x630 Sqmm LT PVC cable Single core 124 Al. Lugs 150 Sqmm 125 Supply, Heavy duty Connector (torque controlled shear bolted connector) 126 Completion of following work with all material, cartage/carriage, T&P, and any other required work for various 11kv Line/Sub-station, DTR, PTR augmentation etc. worksas per RESPO Drawings/standard specifications/Estimates/as per satisfaction of supervisory engineer. 127 Stay Complete with Concreting 128 Concreting of Pole 129 Dismentling and safe carriage of Old ACSR Weasel Conductor to store centre Mathura/JE store 130 Dismentling and safe carriage of Old VCB to store centre Mathura/JE store 131 Welding of PCC Poles 132 Dismentling of old PCC Pole with accessories 133 Dismentling and safe carriage of old material to store centre Mathura/JE store 134 Water level Pipe Earthing of Panels Neutral & TF Neutral & body 135 Chemical Earthing Panel body & fencing 136 Foundation of LT Protection Panel 30 cm Height 137 Painting of Fencing with red oxide & green paint 138 Painting of pole with red oxide, al paint & post office Paint 139 Interlocking of base in transformer area 140 Ganular sub base for laying of interlocking bricks 141 Toe wall for fencing 142 Reparing of Plinth if required 143 Miscellaneous Lug, Clamp, Washer, Nut, Etc. 144 T/F Plinth 145 T/F Fencing 146 T/F Earthing 147 GI Wire Chain Link Net for fencing Mesh D Fence Wire with foldable Gateheight 1.52Mtr 148 Interlocking of base in transformer area 149 Toe Wall for Fencing
|
