Mining Equipment – Delivery Of 1 Piece Of Multifunctional Device. A Self-Propelled Multifunctional Device Is To Be Purchased To Carry Out Renovation Work In Wismut Gmbhs Former Schlema-Alberoda Uranium Ore Mine At The Aue Site. This Is Intended For Drilling Blast Boreholes, Setting Rock Anchors, Stripping Work, Installing Gearboxes (Appendix 1 Of The Service Description) And For Loading Bulk Materials. Additionally, A Drill Mount, A Hydraulic Hammer And A Loading Shovel Are Required As Attachments Including A Quick-Change System. Due To Local Conditions, The Multifunctional Device Must Have A Crawler Chassis With 4 Support Feet And A (Non-Motorized) Track Chassis. The Control Should Be Carried Out Using A Radio Remote Control. The Working Machine Should Be Supplied With Power Via The Pits 400Vac Network (L1, L2, L3, Pe, It Network Without A Distributed Neutral Conductor) Without A Separate Transformer. Any Different Control Voltages (E.G. 230V, 24V, Etc.) Must Be Generated In The Multifunctional Device From The 400Vac Level. The Following Requirements Must Be Adhered To. Ambient Conditions: • Route Size Standard Profile: Approx. 5.5 M²; W 2.30 M X H 2.75 M (Appendix 2 Of The Service Description) • Minimum Route Height And Width: H = 2 M, W = 1 M (Are Defined By Weather Doors) • Pit Depth: From 50 To 100 M • Weather Temperature: 5 °C To 15°C • Air Pressure: Approx. 975 Hpa • Humidity: 100% • Power Supply: 400Vac (L1, L2, L3, Pe, Without Neutral Conductor - It System) • Track Width: 60 Cm • Track Radius. ≥ 5 M • Rock Hardness: ≤ 150 Mpa Technical Data: • Drive: - Electrically Movable - Connection Via Cee Plug (16A/32A/63A, Pe Position At 6H) - Min. 40 M To 55 M Cable On Reel Device - Drive For Swivel Parts And Attachments Electro-Hydraulically Via Integrated Hydraulic Unit • Attachments With Quick-Change System Note: All Attachments Must Be Adjusted To The Ambient Conditions. > Drill Mount: - For Drilling And Setting Anchors - Can Be Swiveled In All Directions - Equipped With Hydraulic Hammer Drill - 38 Mm Drill Hole Diameter - 1.80 M Drill Hole Length - Drill Motor With Hexagonal Mount (S 22 X 108) > Hydraulic Hammer: - For Tearing And Tearing Work - Incl . Water Spray Nozzle For Dust Binding > Loading Shovel: - Backhoe - 100 To 150 Liters • Chassis: - Tracked Chassis (Rubber) - Track Chassis - 4 Support Feet.
Contact Information
Contact No.
+493718120431
Email
beschaffung@wismut.de
View Notice Now...
Fill Detail for Getting Instant Access
Download Tender Document / Tender Notice
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 82346292
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.