Bids Are Invited For Contracting A Company For The Acquisition Of Electronic Scales, Forklift, Lifting And W ... in Brazil

Work Detail

Electronic Scale With Capacity Of Up To 1000Kg And 500 Gram Division, 1000Mm It Is Standardized By Innmetro. Equipped With An Access Ramp With Structure In Sae 1008/1010, With 3Mm Sheet Thickness, 10 Degree Inclination And Anti-Slip Tapes On The Inclined Face, Fixed By Dowels. New Equipment With 12 Month Warranty After Installation. Installation Included, Motorized Forklift, Automatic Transmission, Triplex Mast Type, Minimum Lifting Height: 4000Mm. Equipped With Bale Grippers, Fire Extinguisher And Solid Tire. Equipped With: Hydraulic Lateral Shifter. Fuel: Diesel, With Operation And Maintenance Catalog, With Instructions On How To Operate The Equipment Safely. Minimum Load Capacity Of 2500Kg. New Vehicle With 12-Month Warranty. Waste Lifting Belt With A Minimum Length Of 6,000 Mm And A Maximum Of 10,000 Mm And A Width Of 1380 Mm; With Fixed Type Flights And Hopper With Metallic Structure Lining The Gap In The Lower Part Of The Conveyor. Monoblock Type Structure Built With Steel Plates. Flat Base In Steel Plate For Belt Sliding. Usable Canvas Width 1000Mm And Flight Width 800Mm And Minimum Height 50Mm. Equipped With A Minimum 3 Hp Gearbox, Controlled Via A Frequency Inverter And Can Be Adjusted Using A Potentiometer To Regulate Its Speed From 0 To 8 M/M. Canvas With Flights And Pressed Clamp Type Splice For Lifting System And Side Seals. Electrostatic Painting. With Trigger System For Emergency Shutdown For Equipment Operators. Installation Included. The Lifting Belt Must Be Compatible And Installed/Coupled With The Flat Separation Belt With Dimensions Of: 1010Mm Height X 1380Mm Width X 10500Mm Length, Through A Feed Funnel, Uniting The Two Equipment. New Equipment With 12 Month Warranty After Installation. Installation Included, Waste Separation Mat Minimum Size Of 10500 Mm, Equipment With Metal Structure With Anti-Corrosion Coating, Equipped With Electric Gear Motor Of Minimum 1Kw Product Dimensions: 1010Mm Height X 1380Mm Width Useful Sorting On Conveyor Belt. Rubber Side Protection To Prevent The Accumulation Of Waste On The Conveyor Belt. Flat Base In Sheet Steel For Sliding The Belt. System For Variation In Conveyor Belt Speed, Through Frequency Inverter And Potentiometer Controlling Belt Advance, Determining Speed ​​For Operation From 0 To 8 Meters Per Minute. Bearings With Adjustment System For Conveyor Belt Alignment. Machined And Galvanized Traction Rollers. Electrostatic Painting. With Trigger System For Emergency Shutdown For Equipment Operators. The Equipment Must Be Compatible And Installed On A Waste Lifting Conveyor With A Width Of 13800 Mm. New Equipment With 12 Month Warranty After Installation. Installation Included., Vertical Baling Press, With Safety Door, Pressing Box In Minimum Dimension (Width 1000Mm; Height 1400Mm; Depth 600Mm); Three-Phase Motor Of At Least 5 Hp; Minimum Nominal Hydraulic Power Of 15 T; 1020 Or Higher Steel Sheet Structure With A Minimum Thickness Of 3/1

Contact Information