|
Supply Of Miscellaneous Fire Items For Atp Anpara , Hose Pipe 63Mm X 22.5Mtr, Delivery Hoses Pipe Of Male &Female Coupling 22.5 Mtrshould Be Made Of Ss 304 And Conforming To Is 636, , Fire Bucket , 100 Mm 4" Steel Bench Vice, Specification : Specification For 100 Mm (4") Steel Bench Vice - 1. Material : Steel Fabricated Vice Swivel With Fixed Base For Heavy Duty . 2. Colour : Red. 3. Dimension (Lxwxh) : 286Mm X 128Mm X 117 Mm +_ 10% . , Karabiner, Specification : Specification For Karabiner : 1. Shape- D Type . 2. Srew On Biner Design. 3.Anti Skidding . 4. Material : Aluminum- Magnesium Alloy. 5. Dimension Lxb (4.4 X 2.95 Inch ) Plus .Minus 10%. 6. Weight: 85 Gms Plus Minus 10%. 7. Tension 30 Kn Having 03 S Ew Lock. 8. Pear Shaped Facilitate Belaying Single Ropes With A Munter Hitch. For Connecting Belay/Rappel Devices Or Use At The End Of A Lanyard. , Electrical Siren, Specification: Specification Of Electrical Siren 03 Km Rang ; 1. Horizontal, Double Mounting Type. 2. Arrangement For Mount At High Elevation Of Building. 3. Single Phase - 220/250 Volts. 4. 6000 Rpm , 50Hz Ac. 5. Supporting Spares For Installation And Switching Device. 6. Required Wires Should Be Supply Along With Above Electrical Siren. 7. Audible Rang- 3 Km. , Fire Gum Boot, Specification: Specification Of Industrial And Protective Rubber Knee Boot Is: 5557-2004 . Rubber Knee Boot Type -Ii , Consist Of Reinforcing Fabric Made Of Cotton Or Manmade Fabric Having Minimum Breaking Load Of 1000 N At Warp And 550N At Weft, When Tested In Accordance E With Is: 1969 And Will Be Lined With Sea Table Rubber Compound. Material Required For Industrial Protective Rubber Boot Should Confirm Table -Iii Of Is- 5557-2004. Thickness - The Minimum Thickness ( Rubber And Fabric ) Of The Boot For Type Ii For Various Parts And Component. All Tests Confirm To Is: 5557-2004. Size - 9 And 10 , Fire Helmet ,Specification : Specification Of Fire Helmet As Per Bis 2745-1983. 1. Shall: The Shell Of The Helmet Shall Be Made Of Non Metallic Materials So As Meet The Test Requirement Mentioned In Bis 2745-1983. 2. Protective Pad: It Shall Be Of Expanded Polystyrene Or Materials Of Similar Properties. 2. Retention System : The Material For The Headband, Chin Strap And Cradle Shall Be Sweat - Resistant.,Non Irritant And Shall Not Cause Skin Disease. 4. Size: Helmet Shall Be Of The Size Having Circumstances Of Inside Heaband Of 560 M -600Mm. 5. Construction Requirement: The Construction Of The Helmet Shall Be Comply Is- 2745-1983. 6. Workman Ship And Finish: All External Surface And Edges Shall Be Smooth And Rounded And There Shall Be No Metallic Parts Or Other Rigid Projections On T E Inside Of The Helmet. The Colour Of The Helmet Shall Be Inherent White Or Lemon Yellow. 7. Mass : Mass Of The Complete Helmet Excludingvisor May Be Exceed 800 Gm And If Exceeds, The Mass To The Nearest 30 Gm Shall Be Marked. 8. Performances Requirement: The Helmet Shall Be Comly All The Test Mentioned In Is-2745-1983. 9. Marking : Each Helmet Shall Be Clearly And Indelibly Marked With The Following- (A) Manufacturers Name Or Trade Mark. (B) Size With Colour. (C) Year Of Manufacture, With Or With-Out Vi , Fire Bell , Specification :Fire Bell As Per Is: 928-1984 , Hose Winding Machine, Specification : Specification For Hose Binding Machine (Manual) Carbon Steel, As Per Is: 3744 Hose Binding Machine Is Used To Firefighting Hoses To The Shanks Of Couplings, Using Copper/G.I. Wire.Itssimpple Rugged Design Ensures Long And Trouble Free Operation, And It An Easily Operated By A Single Person, With Minimal Training. Different Sizes Of Couplings Can Be Bound Using The Adaptors Provided. Brief Description: Hose Binding Machine, As Per Is:3744, Made Of Carbon Steel And C.I Graded Material. The Machine Shall Be Suitable For Binding Firefighting Hose On Hose Coupling Shanks Using Copper Or G.I. Wire. Male And Female Abaptors Of Different Types And Sizes, For Binding Of Hoses Can Be Supplied Along With The Machine(Optional). 1.0 General Data 1.1 Material Of Construction Carbon Steel 1.2 Reference Is:3744-1985 2.0 Material Of Construction 2.1 Mounting Bractek: C.I. Is:210-1978 2.2 Circular Plate:C.I Is:2062 2.3 Threaded Spindle: C.I.Is:2062 2.4 Rods: C.I. Is:2062 2.5 Wire Spool:Brass/C.I.Is:304-1981/Is:206 22.6 Bind Ng Adaptors:Gummetal Is:318 Ltb 2/Ss 304/Ss316 3.0 Testing And Quality Control 3.1 Dimensional Check: See Drawing Below 3.2 Documentation: Internal Inspection Report, Suppliers Certificates, Approved Laboratory Test Certificates 4.0 Operational/Technical , Life Saving Jacket, Specification : Life Jacket 1.Purpose: Used To Protect The Wearer In Open Water Bodies, These Vest Type Life Jackets Provide Safety In Rough Seas And Are Useful In Maintaining The Body In The Optimum Position To Prevent Drowning.2. Technical Requirement: (A) It Shall Be M De Up Of High Visibility Nylon Orange Coloured Cloth Filled With High Density Soft Polyehylene Foam To Provide High Floatability.(B) Jacket Shall Be Provided With Suitable Plastic Quick Lock Buckle And Velcro For Tightening.(C)Irs Approved Water Activated Life Jacket Light Should Be Provided With Life Jacket.(D) Whistle Shall Be Attached With Jacket And Solas Approved Retro-Reflective Tape Stitched At Visible Locations Covering A Total Area Not Less Than 400Cm.(E)It Shall Be Suitable For Major Application I Floods And Sea/River Mishaps.(F) Life Jacket Shall Have Size Not Less Than 68X42x10 Cm.(G) Floatability Shall Not Be Less Than 16.5Kgs. (H) Weight Of Jacket Shall Not Be More Than 750 Gms(+/-100Gm).3. Approvals: (A) Lifejacket Shall Be Irs Approved (B)Li Ejacket Shall Conforms To Solas 74 As Amended Reg. Iii/4,111/7.111/22,111/34,X/3 International Code Of Safety For High Speed Craft 1994 & 2000 Chapter 8. 4. Pre Dispatch Inspection: (A) Pre Dispatch Inspection Shall Be Carried Out At Vendor/Oem Site Whe , Lifebuoy, Specification : Lifebuoy 1. Purpose: A Lifebuoy Is A Life-Saving Buoy Designed To Be Thrown To A Person In Water, To Provide Buoyancy And Prevent Drowning. The Lifebuoy Is Usually Ring-Or Horseshoes-Shaped Personal Flotation Device With A Connecting Line Allowing The Casalty To Be Pulled To The Rescuer. They Are Generally Located Beside Bodies Of Water That Have The Depth Or Potential To Drown Someone, Since The Unavailability Of Lifebuoys Could Lead To Death. 2.Technical Requirement: (A) The Lifebuoy Shall Be Irs Approved (B) Lifebuoy Shall Be Made Up Of, High Visibility, Impact Resistant Orange Pe Material Filled With High Density Soft Polyurenthane (Pu) Foam Which Gives High Floatability.(C)Lifebuoy Shall Be Provided With A Grab Line Attached At Four Equally Spaced Point .(D) Lifebuoy Shall Have Solas Retro-Reflective Tape Stuck At Four Equally Spaced Places.(E) Lifebuoy Should Be Suitable For Major Application Is Rescue During Floods And Sea Mishaps.(F) Lifebuoy Should Have Od=71+1 Cms,Id=45 Cms.(G) Lifebuoy Should Have Buoyancy More Than 17 Kg.(H) Lifebuoy Shall Be Moisture Proof And Non-Inflammable 3. Approvals: (A) Lifebuoy Shall Be Irs Approved (B) Lifebuoy Shall Conforms To Solas 74 As Amended Reg. Iii/4,111/7.1,11/34,X/3 Lsa Code Reg.1/1.2 And Ii/2.1.1 Imo Resolution , Loud Hailer Solder Step Held Mick ,Specification : Loud Hailer With Solder Step And Extra Held Mick , Poly Popylene Ropes , Specification : Specification For 3 Strands Poly Propylene Rope For Rescue Purpose Smg-13 1. Circumference-21/2 Inchees2.Diameter In Mm - 20 Mm 3.Breaking Strength In Kgf - 5800 4. Pp Runnage In Mtr/Kg-5.50 , Safety Belt , Safety Cones , Specification : Spectfication For Safety Traffic Pvc Cones Hexagonal Bases No-Iga 1. Highly Visible, Pvc Injected Molded Cones 2.Colour: Fluorescent Orange Colour With Prismatic White Reflective Collars Having Hexagonal Black Rubber Based To Grip The Road Which Is Not Se Arated When Hit By Vehicle . 3. Size: 28" , Generator Diesel 5Kva , Specification: Specification For 5 Kva Low Noise Diesel Generator Set 1. Machine Should Be Compact And Easy To Move By Single Person2.Max Ac Output: 5Kva 3.Product Type: Diesel Generator 4.Rated Voltage:220V 5.Starting System: Recoil And Electric Both 6. Engine Type: 4 Stroke, Air Cooled 7. Cyllinder; Single 8. Over All Size& Dimention(Lxwxh): 26.4X20.X22.7 Inches+_10% 9. Weight: 82 Kg+_10% 10. The Device Should Work Silently With Nominal Noise Level Of 72 Db 11. Equipped With Auto Voltage Regulation, Low Oil Indicator,Fuel Gauge 12. Fuel Type: Diesel , Water Monitor As Per Sample , Base Flange Wtr Monitr Hdfire-M, As Per Sample , Specification : Base Flange ( Is:2002-I) For Water Monitor. , Drain Vlv 1/2 Wtr Monitr Hdfire-M, As Per Sample, Specification : Drain Valve 1/2 - Brass Ball Valve ( Cromeplated) For Water Monitor. , Elbow Wtr Monitr Hdfire-M, As Per Sample, Specification : Elbow (Cs Seamless To Is: 4310, Sch40) For Water Monitor , Handl Ms Is1732 Wtr Monitr Hdfire-M, As Per Sample, Specification : 0707 Handle( Ms Is: 1732) For Water Monitor. , Lock Wtr Monitr Hdfire-M, As Per Sample, Specification : Lock For Vertical & Horizontal Rotation (Brass To Is: 291-I) For Water Monitor. , Nozzle Wtr Monitr Hdfire-M, As Per Sample, Specification : Nozzle Of Water Monitor ( Bronze To Is :318 Ltb-Ii/ Aluminium Alloy Is:617 Gr 4450). , Reducer Wtr Monitr Hdfire-M, As Per Sample, Specification : Reducer (Cs Seamless To Is:1239-Ii Sch40) For Water Monitor. , Swivel Joint Wtr Monitr Hdfire-M, As Per Sample, Specification : Swivel Joint For Vertical & Horizontal Rotation ( Bronze To Is: 310, Sch40) For Water Monitor. , Water Barrel Wtr Monitr Hdfire-M, As Per Sample, Specification : Water Barrel (Cs Seamless To Is: 1239-I, Sch40) For Water Monitor.
|
