Office Cabinet - Type: Tall; Raw Material: Steel Plate 22 (0.75 Mm); Dimensions: 198 X 90 X 40 (Height X Width X Depth) 22 (0.75 Mm); With At Least 4 Internal Shelves, Adjustable Every 5 Cm, Doors: 2 Doors; Structure / Base: Steel; With Deomega-Shaped Longitudinal Reinforcement At The Bottom Of The Shelf; With 2 Lockable Opening Doors With A Key, Using A Yalle Type Lock With Internal Locking Using Two Steel Rods And With 02 (Two) 100 Mm Half-Moon Type Zamac Or Chromed Metal Handles Or Similar; Finish Without Dents, Weld Protrusions, Edges, Abrasions, Burrs, Warps Or Details; Entirely Painted In Synthetic Enamel With A Thickness Of 30 Microns, Electrostatic, With Drying In An Oven At 150 Degrees Centigrade, In Gray Color., 1.1/2 Hose Clamp, Electronic Scale - Type: Bench; Capacity: 50 Kg; Dimensions: 28 Cm X 45 Cm X 43 Cm (Width X Height X Depth); Platform/Dish: 33 Cm X 28 Cm; Power: 110/220 Volts; Display: Digital; Communication Interface: Not Applicable;Specification Complementation: Stainless Steel Tray, Carbon Steel Platform And Epoxy Painting. Rubber Feet. Column Height: 41 Cm., Cake Mixer - Raw Material: Plastic; Speed: Minimum 3 Speeds; Voltage: 110 Volts; Power: Planetary; Component: Stainless Steel Bowl/Vat; Component (1): Not Applicable. Complement Specification: Cake Mixer, Planetary, Volumetric Capacity 05 Liters; Plastic Structure; 03 Beaters For Light And Heavy Doughs; Comes With Instruction Manual In Portuguese., Fixed Armless Chair Type 4 Legs For Office - Purpose: Employee; Type: Fixed Four Feet; Backrest: Medium; Seat And Back With Rounded Edges; Structure: Anatomically Conformed Plywood; Feet: 4 Toothpick Legs In 7/8 Round Steel Tube;. Seat And Back With Rounded Edges, Featuring An Anatomically Shaped Plywood Structure With A Minimum Thickness Of 12 Mm, Upholstered With Anatomically Molded Injected Polyurethane Foam With A Density Of At Least 53 Kg/M³ (With Point-By-Point Control) And Thickness Of 50 Mm, Also Covered In Fabric With 100% Polyester Composition, In The Color To Be Determined By The Requesting Body, Finished With Impact Protective Edges In Pvc Or Abs Profile. Backrest Measurements: 400 Mm (Width) Height); Seat Measurements: 440 Mm (Width) X 440 Mm (Height); Seat Top Face Height: 470 Mm. Base: With 4 Toothpick-Type Legs Made Of 7/8 (Seven-Eighth) Round Steel Tube, With A Thickness Of 1.2 Mm, Supported On Black Injected Polypropylene Shoes. The Entire Set Must Be Free From Any Defects; It Must Be Perfectly Level, Firm And Free Of Gaps, As Well As Having The Metal Parts Finished In Black Epoxy Powder Electrostatic Paint With Anti-Rust Pre-Treatment. Fixed Structure Type 4 Feet Made From 22.23 X 1.50 Mm Bent Steel Tube And 27 X 12 Fully Automated Electrostatic Painting Finish In Epoxy Powder, With Anti-Rust Pre-Treatment (Phosphate), Fully Coating The Structure With A Film Of Approximately 100 Microns, And With Properties Of Resistance To Chemical Agents. Additional Features: Other Product Specifications Must Comply With Abnt Standards (Association B
Contact Information
View Notice Now...
Fill Detail for Getting Instant Access
Download Tender Document / Tender Notice
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 80131990
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.