Student Set Size 03: Table: Sides And Book Holder Support Tray In 29X58mm Steel Tube Plate 16 (Wall 1.5Mm), Feet In 38Mm Tube (1 ½ Wall) Plate 16 (Wall 1.5Mm). Fixing The Top In A 20X20 Tube (1.50 Mm Wall) To Reinforce Its Upper Part, Which Are Fixed To 2 Side Pieces In A 20X30 Tube (1.50 Mm Wall), Thus Giving Resistance To The Surface Of The Top. Closing With Tips And Shoes In Yellow Polypropylene, Fixed To The Structure Through Replacing Rivets Diameter 4.80Mm, Length 4.8X16mm. Surface Protection With Special Anticorrosive Treatment And Gray Epoxy-Powder Painting, Hybrid And Electrostatic. Book Holder (503X304mm) In Gray Polypropylene, Fixed To The Longitudinal Structure Using Replacing Rivets. Top (600X450mm) Flat Surface, In Abs Resin, Textured, 4Mm Thick, High-Gloss Side Edges (Flaps That Surround The Structure, Dimensions Of 45Mm In Height On The Back Side Of The Top, Reduced To 21Mm On The Part In Contact With The User) With Frieze For Greater Resistance, Transverse And Longitudinal Ribs To Reinforce Traction On The Lower Part Of The Top. Table Height: 590Mm. Chair: Structure In 20.7Mm Steel Tube, 14 Sheet Metal (1.90Mm). Tips And Shoes In Yellow Polypropylene, Fixed To The Structure Using A Fitting And Expansion Pin. Surface Protection With Special Anticorrosive Treatment And Gray Epoxy-Powder Painting, Hybrid And Electrostatic. Seat (400X310mm) And Back (396X198mm) In Polypropylene, Anatomical, Yellow. Seat To Floor Height 350Mm. Table Tolerance: Up To + 2 Mm For Width And Depth, +/- 1 Mm For Thickness, And +/- 6 Mm For Height. Chair Tolerance: Up To + 2 Mm For Width And Depth, +/ - 1Mm For Thickness And +/- 10Mm For Height From Seat To Floor., Student Set Size 04: Table: Sides And Book Holder Support Tray In Steel Tube 29X58 Mm Plate 16 (Wall 1.5 Mm), Feet In Tube 38 Mm (1 ½ Wall) Plate 16 (1.5 Mm Wall). Fixing The Top In A 20X20 Tube (Wall 1.50 Mm) Thus Giving Resistance To The Surface Of The Top. Closing With Tips And Shoes In Red Polypropylene, 80 Mm, Length 4.8X16 Mm. Surface Protection With Special Anticorrosive Treatment And Gray Epoxy-Powder Painting, Hybrid And Electrostatic. Book Holder (503X304 Mm) Made Of Gray Polypropylene, Attached To The Longitudinal Structure Using Replacing Rivets. Top (600X450 Mm) Flat Surface, 4 Mm Thick, High Gloss Side Edges (Flaps That Surround The Structure Dimensions 45 Mm High On The Back Side Of The Top With Reduction To 21 Mm On The Part In Contact With The User) With Frieze For Greater Resistance, Transverse And Longitudinal Ribs To Reinforce Traction On The Lower Part Of The Top. Table Height: 640 Mm. Chair: Steel Tube Structure 20.7 Mm, 90 Mm). Tips And Shoes In Polypropylene In Red, Hybrid And Electrostatic In Gray. Seat (400X350 Mm) And Back (396X198 Mm) In Polypropylene, Color Red. Height From Seat To Floor 380 Mm. Table Tolerance: Up To + 2 Mm For Width And Depth, Childrens Collective Set, Consisting Of A Table And Four Chairs: Childrens Collective Table: Structure With Feet In 1 ½ Steel Tube (Wall 1, 50Mm), 20 X 30Mm Steel Tube Sleepers (Wall 1.06Mm). Closure With Internal Tips In Yellow Polypropylene. Fixing The Top To The Structure Using 8 ¼ X 1 ¼ Hexagonal Screws. Welding Using The Mig Process In All
|