Student Set, Model Fnde – Composed Of 01 Table And 01 Chair, With Top Made Of Mdf, Covered In Its Upper Phase In High-Pressure Melamine Laminate, With The Height Of The Student Being Between 1.59 And 1.88, With Seal From Inmetro E Normas Da Abnt., 33 E 1, 59, Set For Childrens Dining Room – Rectangular Table, Mdf Top With A Minimum Of 18 Mm, Covered In Beige Formica, Measuring A Minimum Of 2.00 M In Length X 0.60 M Wide X 0.57 M High, Metal Frame 20 Length X 0.30 M Width According To Fnde Technical Catalog Specifications, Hexagonal Set For Early Childhood Education - 06 Seats Consisting Of 01 Table And 06 Chairs. Table: Table Dimensions: L1350 X W1210 X H 590 Mm. Top Made Of Medium Density Wood Fiber (Mdf) 25 Mm Thick, Covered On The Top And Bottom With Low Pressure Melamine Laminate (Bp) In White, Rounded Edges And Varnished In Natural. Structure Formed By “11/2 Inch” Tubes Interconnected At The Top By 40 X 20 Mm Tubes, Surface With Anti-Corrosive Treatment (Phosphating) Through An Ecological Process, Without The Formation Of Effluents And Electrostatic Painting In Hybrid Resin Epoxy/Textured Polyester In Powder Form. Chair: According To Fde Technical Catalog Specifications In Standard Cja 03., Steel Cabinet 02 Doors With Reinforcement; Dimensions H 2000 X W 1200 X D 450 Mm; Plate 24; Epoxy Paint - Crystal Gray Color With 4 Adjustable And Reinforced Shelves. Capacity: 50 Kg Evenly Distributed Per Each Tray; With Handle And Lock; Triple Lock; Leveling Shoe, E.V.A Tatami Dimensions And Tolerances · Plate Size: 1000 Mm X 1000 Mm +/- 10 Mm; · Thickness: 20 Mm +/- 10 Mm. Features · Interlocking Tatami Boards And Finishing Edges, Made Of E.V.A. (100%), Non-Toxic, With A Textured, Siliconeized, Non-Slip And Washable Surface; · Density Between 150 And 180 Grams Per Cubic Centimeter; Each Piece Must Be Supplied Together With A Finishing Edge. · The Fittings Must Provide The Perfect Joining Of The Pieces; · The Edges Of Edges And Plates Must Be Uniform, With A Precise Cut At 90º In Relation To The Surface Plane, Free From Burrs And Flaws., Meeting Table: Rectangular Top: 2000 X 950 Mm +/- 50 Mm; · Height: 750 Mm +/- 5 Mm; · To Accommodate People In Wheelchairs (Pcr) And Meet The Requirements Of Abnt Nbr 9050, The Table Must Have Free Height Under The Top: Minimum Of 730 Mm; · Top Thickness: 25 Mm +/- 0.6 Mm; · Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers. Characteristics · Mdf Top, 25 Mm Thick, Covered On The Lower Face With Low Pressure Melamine Laminate (Bp), And On The Upper Face With High Pressure Melamine Laminate, 0.8 Mm Thick, Gray Or White, Textured Finish. · Edges Headed With A Solid 180º Extruded Profile, In Gray Or White, With The Same Tone As The Laminate Of The Top, Allowing For Small Variations Resulting From The Characteristics Of Each Material (Gloss, Texture). The Profile Must Be Fitted And Fixed With Adhesive To The Worktop, And Be Level With Its Surfaces.
|