Electric Surgical Table Or For Small, Medium And High Surgical Specialties Physical Characteristics Base Rectangular Base Made Of Stainless Steel Sheet With A Minimum Thickness Capable Of Withstanding The Most Diverse Procedures, With Reinforced Abs Coating, Against Impacts And Disinfectants. Movement Of The Base Must Be Carried Out Through Of At Least 04 (Four) Casters With 360 Degree Rotation, With Motorized Locking And Unlocking, Activated Through Buttons On The Remote Control And On The Control Panel On The Table Column. Column Lifting Column Must Be Composed Of Guide Columns With Guide Rods Of Ground And Stainless Steel And Hard Chrome. It Must Allow Wide Adjustment Of Minimum And Maximum Heights; Minimum 622 Mm And Maximum 1150 Mm (Without Mattress), With A System Activated By Control And On The Table Column Itself. Chassis The Structure Must Be Made Of Stainless Steel, Articulated And Divided Into At Least 5 (Five) Sections (Headboard, Back Of The Top, Back Complement, Seat Of The Top, Split Legs). With A System That Provides Shielding Against Liquids Of The Parts Internal.Have Stainless Steel Rulers For Placing Accessories. Capacity The Capacity Of The Table Is For Patients Weighing Up To 454 Kg In A Static Position Or 250 Kg In A Reverse Position. Radiotransparent Top For The Use Of Image Intensifier, X-Ray Throughout Its Entire Length, With A Minimum Longitudinal Displacement Of 300 Mm, Through The Use Of Remote Control. Divided Into Up To 5 (Five) Sections (Headboard, Split Legs). Motorized (Electric) Table Movements: Semi-Flexion Movements Of Legs And Thighs, Semi-Seated, Extreme Lordosis, Lithotomic, For Thyroid Operation, Trendelenburg, Proclive Or Reverse Trendelenburg, Left Lateral, Right Lateral, Back, Flex And Reflex E Longitudinal Displacement; Having Integrated Sensors That Alert When There Is An Eminent Risk Of Collision And Stop The Movement Of The Table, Surgical Table Specific Accessories (Obese Users) Physical Characteristics Base Rectangular Base Made Of Stainless Steel Sheet With Minimum Thickness Capable Of Supporting The Most Diverse Procedures, Triggered Through Of Keys On The Remote Control And On The Control Panel On The Desk Column. Lifting Column Shall Be Composed Of Guide Columns With Guide Rods Of Ground And Stainless Steel And Hard Chrome. It Must Allow Wide Adjustment Of Minimum And Maximum Heights; Minimum 622 Mm And Maximum 1150 Mm, With A Control-Driven System And The Table Column Itself. Chassis The Structure Must Be Manufactured In Stainless Steel, Split Legs). In Stainless Steel For Placing Accessories. Capacitythe Capacity Of The Table Is For Patients Weighing Up To 454 Kg In A Static Position Or 250 Kg In A Reverse Position. Radiotransparent Top For Image Intensifier Use, Split Legs). Motorized (Electric) Table Movements: Semi-Flexion Movements Of Legs And Thighs, Flex And Reflex And Longitudinal Displacement; Have Integrated Sensors That Alert When There Is An Imminent Risk Of Collision And Stop The Table Movement (For Movements Of The Leg And Height Of The , Electro-Hydraulic Surgical Table – Basic Accessoriesphysical Characteristicsbaserectangular Base Made Of Stainless Steel Sheet With A Minimum Thickness Capable Of Withstanding The Most Diverse Procedures, Against Impacts And Disinfectants. Movement Of The Base Must Be Carried Out Through At Least 04 (Four
|