|
Wardrobe Two Individual Doors And Internal Central Divider. Three Internal Shelves. Made From 18Mm Mdp Coated In Low Pressure Melamine. Edges In Pvc Profile. Approximate Dimensions: Height 1600 Mm, Width 1000 Mm And Depth 420 Mm., Crib Made Of High Performance Foam Covered In Waterproof Bagum Or Similar Material, Washable, Resistant. Approximate Dimensions Of 1.30 Two Sides Measuring Approximately 1.25 X 0.08 Cm. Foam In Minimum Density Of 18 Cm With Zipper At The Bottom And Cursor With Invisible System To Store The Cursor. With A Recess Of 5 Cm In A Space Of 30 Cm. Two Headboards Measuring Approximately 0.50 A Mat Measuring Approximately 110 4 (Four) Feet. Structure In Steel Tube. Feet With Tips In 100% Injected Polypropylene. Anticorrosive Treatment. Epoxy-Powder Painting. Approximate Measurements: Seat (440X400mm) And Back (350X280mm) In Plywood, With Injected Foam Of Minimum Density Of 45, Covered In Black Fabric., Swivel Executive Chair, With Armrests, Backrest With Medium Backrest With Height Adjustment And Tilt, Seat Height Adjustment; Seat And Back Foams Injected Into Flexible Polyurethane, Covered In Black Fabric; Height And Lateral Adjustment On The Arm; Swivel Base With Central Column Made Of Steel And 5 (Five) Legs. Approximate Measurements: Seat (450X450mm) And Back (400X500mm)., Childrens Dining Chair, Made In Pvc, For Children Up To 15 Kg, With Seat, Back And Sides Padded In Laminated Plastic. Must Have Footrest, Tray, 5-Point Seat Belt. Dismountable And With Safety Locks. Approximate Measurements: Height 97Cm; Width 74 Cm; Depth 57 Cm. Product Certified By Inmetro, Stringer Chair With Four Seats. High-Resistance Tubular Steel Structure, Epoxy Painting, With 3 Inverted T-Shaped Legs (Sides And Central), Injected Foam Upholstery (Seat And Back), Capacity Of Up To 120 Kg Per Seat. Seats And Backrests Covered In Non-Deformable Fabric In Black. No Casters, No Arms. Medium Back, With Pvc Protective Edges, Stackable Bed With Articulating Feet: Childrens Bed, Colorful, Non-Toxic, With 2 Headboards And Articulating Support Feet To Prevent Bending (Greater Impact Resistance), Thermoplastic Material Using The Injection Process. The Feet Must Follow The Same Design As The Headboards And Must Be Located In The Central Part With Operation At A 90 Degree Angle. The Headboards And Feet Must Be Equipped With Rubber Tips, 4 For Each Headboard And 2 On Each Foot, Totaling 12 On The Sides With 2 Oblong Tubes Of Approximately 16Mm X 30Mm In Steel. Approximate Thickness Of 1.90 Mm Each. Stackable Docking System, With Approximate Space Of 5 Cm Between One Sheet And Another, Bed Made Of Hollow Canvas With Antiperspirant, Antifungal, Anti-Uv And Antioxidant Ventilation System, Made Of 100% Polyester Fabric Pasted With Pv
|
