Fixed Chair With Low Backrest The Structure Is Composed Of 1010/1020 Steel Tubes, With The Legs And Supports Of The Seat And Back Made Of 16X30 Oblong Tubes With 1.5 Mm Thickness And Welded To Two Horizontal Beams Of 7/8 Steel Tubes 1.2 Mm Thick Using The Mig Welding Process, Forming A Stackable Structural Assembly. To Finish The Ends Of The Foot Tubes And Crossbars, The Structure Receives Plastic Tips Injected Into Engineering Thermoplastic (Polypropylene Copolymer). The Entire Structure Receives Metallic Surface Preparation Protection In Nanotechnology (Nano Ceramics), And Electrostatic Epoxy Powder Coating, Which Guarantees Protection And A Longer Service Life For The Product. The Seat Is Made Of Engineering Thermoplastic (Polypropylene Copolymer), Manufactured Using The Injection Process And Anatomically Molded With A Textured Finish, With Approximate Dimensions Of 460 Mm (Width) X 415 Mm (Depth), Featuring Rounded Corners At Its Ends. The Backrest Is Made Of Engineering Thermoplastic (Polypropylene Copolymer) Injected And Anatomically Molded With A Textured Finish, With Dimensions Of 460 Mm (Width) X 335 Mm (Height), Featuring Rounded Corners At Its Ends. The Backrest Is Attached To The Structure By A Double Cavity On The Back Of The Backrest, Which Fits Into The Metal Structure. The Backrest Is Locked Using Two Fixing Pins, Injected In Engineering Thermoplastic (Copolymer..., Swivel Chair With Armsupholstered Swivel Chair With Arms And Castors, Equipped With A Damper Mechanism And Seat And Backrest Adjuster. Dimensions And Tolerances: Width Seat Length: 500 Mm +/- 50Mm;Seat Depth: 460Mm +/- 10Mvariable Seat Length: Mandatory Range Between 420Mm And 520Mm;Backrest Width: 400Mm +/- 10Mm (Measured At The Most Prominent Point Of The Lumbar Support); Backrest Vertical Extension: 350Mm +/- 10Mm;Seat Foam Thickness: Minimum 40Mm;Backrest Foam Thickness: Minimum 30Mm;Dimensional Tolerances For Tubes According To Abnt Abnt 6591;Tolerances For Paint Layer: Minimum 40 Micrometers/ Maximum 100 Micrometers.Featuresseat And Back Made Of Hot-Molded Anatomical Plywood, Containing At Least Seven Internal Sheets, With A Maximum Thickness Of 1.5 Mm Each. Seat And Back Upholstery In Expanded Polyurethane Foam, Glued To The Wood And Covered With Fabric On The Gray Color, Provided With Protection With A Water-Repellent Waterproofing Product.Bottom Sides Of The Seat And Backrest Covered With Injected Plastic Covers, In Black.Fixing Of The Seat And Backrest To The Structure Using Screws With Metric Thread And Nuts Crimping.Structure Composed Of:- Independent Seat And Back Adjustment Mechanism; Inclination Of The Backrest Is Variable By At Least 22º And The Seat By At Least 8º With A Lock In Any Position Through The System Of Blades Locked By..., Work Tablestraight Table Dimensions: 160 Measurements For More Or Less).Top Made Of 25 Mm Thick Mdp, Covered In Textured Low-Pressure Melamine Laminate On Both Sides, Front And Back Edges Finished With 3 Mm Thick Pvc Tape, Hot Glued By The Holt-Melt System Throughout Its Perimeter, With A Minimum Radius Of 2.5 Mm. Transverse Edges Finished In 2 Mm Thick Pvc Tape, Hot Glued Using The Holt System
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 78281233
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.