Industrial Stove With 06 Burners And Oven. Characteristics: High Pressure, With A Minimum Profile Of 08Cm. 40X40cm Grills, With Fixing Via Insert, With Powerful Flames, And With Burners Equipped With A Flame Supervisor Device. Cast Iron Table Grates And Burners, Coated In Epoxy Paint. Feet In Steel L Profile, Fixed So That The Equipment Is Approximately 50 Mm From The Floor. Oven With A Minimum Capacity Of 80 Liters, With A Stainless Steel Lid, And Suitable For The Stove Model. Minimum Dimensions: 146X112x80 Cm (Wxdx.), Stainless Steel Handling Table With Or Without Mirror. Approximate Dimensions: Measurements (L) 100 Cm X (W) 60 Cm. Product Features: 100% Stainless Steel. Steel Type: Austenitic (0.08 C, 18% Cr, 8% Ni). Resistant To Corrosion And Oxidation. Approximate Total Height Of 87 Cm. Steel Sheet Thickness (Table Cover) Minimum 1.0 Mm. With Lower Shelf, Possibly With Hollow Grid. Plastic Terminals On The Feet With Height Adjustment. Approximate Lid Weight Capacity: 300 Kilograms. Approximate Weight Capacity Of The Lower Shelf: 100 Kilograms. Approximate Total Weight Capacity: 400 Kilograms. Reinforced Lower Structure Made Of Stainless Steel Tube With Approximate Diameter Of 04 Cm., Stainless Steel Handling Table With Or Without Mirror. Approximate Dimensions: Measurements (L) 150 Cm X (W) 70 Cm. Product Features: 100% Stainless Steel. Steel Type: Austenitic (0, With Hollow Grid. Plastic Terminals On Feet With Height Adjustment. Reinforced Lower Structure Made Of Stainless Steel Tube With Approximate Diameter Of 4 Cm., Food Mixer - Domestic Line. 3 In 1 With Crusher And Egg White Beater. Minimum Power Of 200W. Minimum Dosing Cup Of 700Ml. With Two Speeds. Power Cord (Tail) Certified By Inmetro, With Voltage Indication. Voltage Of 220 Or Bivolt., Industrial Vertical Refrigerator 4 Doors Rf1 ( Proinfância Model) - Description: 4-Door Vertical Industrial Refrigerator, Minimum Useful Capacity Of 1000 Liters, Single-Phase 110 V Or 220 V (Depending On Local Voltage), 1/2 Hp Compressor, Convective Thermal Transmission System, Through Evaporators And Condensers With Forced Air System (Frost-Free System), Equipped With 8 Adjustable Shelves.Approximate Dimensions: 180X125x75cm (Hxwxd) Construction Features: Monoblock Type Cabinet Coated Internally And Externally In Stainless Steel, Plate 22 (0.80 Mm). Cabinet Insulation Made Of Injected Polyurethane, With A Minimum Thickness Of 55Mm And A Minimum Density Of 36 Kg/M3. Adjustable Shoes Made Up Of A Metal Base And A Solid Tip Made Of Polymeric Material, Fixed So That The Base Of The Equipment Is Located Approximately 150 Mm From The Floor. Doors Coated Internally And Externally In Stainless Steel, In Sheet 22 (0.80 Mm). Injected Polyurethane Door Insulation, With A Minimum Thickness Of 45 Mm And A Minimum Density Of 36 Kg/M3. Hermetic Sealing Around The Entire Perimeter Of The Doors, Made Up Of An Accordion Magnetic Gasket. Handles, Latches And Hinges In Stainless Steel. Latches With Automatic Locking. Thermal Barrier Around The Entire Perimeter Of The Door Frames To Prevent Condensation, Consisting Of Low Power, Interchangeable Electrical Resistance. Temperature Control System Using An Adjustable Thermostat, Equipped With A Digital Dethermometer, With Front Positioning For Easy Access. Convective Thermal Transmission Refrigeration System, Equipped With 1/2 Hp Hermetic Decompressor, Single Phase 110 V Or 2
|