Quotation Are Invited For Installation Of Motor Operated Valve Actuator in United Arab Emirates

Work Detail

Quotation are invited for Installation of Motor Operated Valve Actuator. FOR MORE DETAILS CONTACT MR. ABHILASH (050-4743525). INSTALLATION OF MOTOR OPERATED VALVE ACTUATOR ABOVE THE CHAMBER WITH EXTENSION SPINDLE, PEDESTAL & GRP ENCLOSURE. SPECIFICATIONS ARE AS FOLLOWS: ·#REMOVAL OF EXISTING ACTUATORS, CONTROL UNITS AND ALL TYPE OF CA BLES AS PER THE CONFIRMATION BY THE SITE INSPECTION. ·#INSTALLATION OF NEW ACTUATOR AND CONTROL UNIT AT THE TOP OF CHAMBER WITH EXTE NSION SPINDLE, PEDESTAL AND TERMINATION TO THE CABLE. (REFER THE ATTACHED DRAWING) ·#LAYING OF NEW 3 PHASE POWER CABLE BETWEEN RTU AND MOV#S AS PER THE SITE REQUIREMENT. ·#LAYING OF INSTRUMENTATION CABLES FOR PRESSURE TRANSMITTERS AS PER THE SITE REQUIREMENT. ·#L AYING OF 4# PVC CABLE DUCT FOR ALL CABLES AS PER THE SITE REQUIREMENT. ·#INSTALLATION OF PROPER CABLE TRAY ABOVE THE CHAMBERS. ·#4# CORE CUTTING ON THE COVER SLAB FOR THE INSTALLATION OF EXTENSION SPINDLE. ·#ALL TOOLS AND TACKLES TO BE UNDER CONTRACTOR SCOPE. ·#RE MOVAL OF EXISTING CABLE FROM INSIDE CHAMBER AND TERMINATION TO THE TOP OF CHAMBER. ·#PERMIT TO WORK IN THE EXISTING /LIVE PIPELINE N ETWORKS, SHUTDOWN, SAFETY SHUTDOWN IF REQUIRED, SHALL BE ARRANGED BY DEWA. ·#MANUFACTURE WARRANTEE TO BE SUBMITTED FOR THE ACTUATORS FOR 24 MONTHS FROM THE DATE OF SUPPLY. ·#FOR DETAILS, REFER TO THE DRAWING ENCLOSED WITH THE ENQUIRY. ·#PT IMPULSE LINE TO BE RAISE D ABOVE THE CHAMBER AS PER THE REVISED APPROVAL FROM DEWA, ALL PIPING AND FITTING TO BE USED SS316L GRADE. (REFER THE ATTACHED DRAWI NG) ·#ALL THE MATERIALS TO BE SUPPLIED AND INSTALLED AS PER DEWA SPECIFICATION AND CONFIRMATION BY DEWA ENGINEERS. ·#IF ANY CABLE JO INTS REQUIRED ON PT & MOV COMMUNICATION CABLES THEN ENTIRE CABLES TO BE REPLACED. (BETWEEN CHAMBER TO CHAMBER) ·#INSTALLATION OF GRP ENCLOSURE. (REFER THE ATTACHED DRAWING) ·#AUMA MIDDLE EAST SUPPORT TO BE PROVIDED FOR THE ACTUATOR COMMISSIONING ACTIVATES. ·#AS BU ILT DRAWING FOR ALL CIVIL, ELECTRICAL, MECHANICAL, P & I, I &C AND MODBUS LOOP DRAWING TO BE SUBMITTED TO DEWA AFTER COMPLETION OF P ROJECT. ·#FAT: SHALL BE CARRIED OUT FOR ALL ABOVE MENTIONED INSTRUMENTS AT MANUFACTURER#S WORKSHOP. ·#DELIVERY/SHIFTING OF ALL REMOV ED EQUIPMENT AND FIELD INSTRUMENTS TO DEWA STORE AS APPROVED BY DEWA ENGINEER. ·#GENERAL OPERATIONAL TRAINING FOR OPERATION & MAINTE NANCE STAFF. ·#REFER THE BELOW LIST FOR INSTRUMENTS INCLUDED IN THE PROJECT. NO#MV SCADA NO#PT SCADA NO# 1#MV31105#NO PT# 2#MV31 807#NO PT# 3#MV31808#NO PT# 4#MV31809#NO PT# 5#MV31810#PT31810# 6#MV42201#PT42201# 7#MV42202#PT42202# 8#MV50503#PT 50503# 9#MV50504# PT 50504# 10#MV50505#PT50505# 11#MV50904#PT50904# 12#MV51004#PT51004# Qty: 12 STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://www.dewa.gov.ae/api/RfxDownload/Get/2332302720

Contact Information