Bids Are Invited For The Registration Of Prices For The Eventual Acquisition And Installation Of Totem-Type ... in Brazil

Work Detail

Chilled Water, Hot Water And Pet Water Module, To Be Installed In Public And Strategic Locations To Be Defined By Samae With Installation Included, Minimum 1 Year Warranty, With All Expenses Included If You Need To Replace Parts Repairs, Maintenance And Technician To Carry Out The Services. The Equipment Must Meet The Specifications And Must Be Delivered To The Municipality At The Location Designated By Samae, As Per The Expense/Commitment Request. Below Are The Equipment Specifications And Minimum Guarantee: Product Characteristics Equipment Structure In Stainless Steel, Or Material Suitable For Equipment To Be Installed In Places Where It Will Be Subject To Adverse Weather Conditions, With Appropriate Measures And Dimensions; Dimensions Approximately 1950 Mm High X 400 Mm Wide X 800 Mm Deep; Advertising Area Approximately 1950 Mm High X 800 Mm. The Equipment Must Be Stickered, According To The Layout And Artwork Defined And Approved By Samae; Sides With Suitable And Resistant Material And Painting For Daily Use; Rounded Shapes Without Edges, Avoiding Cuts, Bringing Greater Safety To The User; Activation Through Buttons; Telemetry System For Generating Data Regarding Usage And Panel With Reports; Purification Filter With Easy Access For Replacement Inspection. Chilled Water Module The Water Cooler Device Must Be Designed To Supply Water At An Adjustable Temperature Between 4°C And 10°C According To The Customers Needs. The Tank That Stores Chilled Water Must Have A Minimum And Adequate Capacity Corresponding To Its Use. The Tank Must Be Built With Isolation From The Entire Internal Electrical And Hydraulic Structure. Your Reservoir Must Be Made Of Suitable Material. A Dispenser With Chilled Water Outlet For Container Supply. Hot Water Module The Water Heater Apparatus Is Intended To Supply Water At An Adjustable Temperature Between Ambient Temperature And Approximately 80°C. Module..., Chilled Water And Water Module For Pets, Warranty Of At Least 01 Year, With Appropriate Measures And Dimensions; Dimensions Approximately 1700 Mm High X 400 Mm Wide X 600 Mm Deep; Advertising Area Approximately 1700 Mm High X 600 Mm. The Equipment Must Be Stickered, According To The Layout And Artwork Defined And Approved By Samae; Sides With Suitable And Resistant Material And Painting For Daily Use; Rounded Shapes Without Edges, Avoiding Cuts, Bringing Greater Safety To The User; Activation Through Buttons; Telemetry System For Generating Data Regarding Usage And Panel With Reports; Purification Filter With Easy Access For Replacement Inspection; Chilled Water Module The Water Cooler Device Must Be Designed To Supply Water At An Adjustable Temperature Between 4°C And 10°C According To The Customers Needs. The Tank That Stores Chilled Water Must Have A Minimum And Adequate Capacity Corresponding To Its Use. The Tank Must Be Built With Isolation From The Entire Internal Electrical And Hydraulic Structure. Your Reservoir Must Be Made Of Suitable Material. A Dispenser With Chilled Water Outlet For Container Supply.Module For Petwater At Room Temperature, The Drinking Fountain Built, With Slow Water Drain To Not Leave Standing Water In The Container, Has A Thief System In Case Of...

Contact Information