|
Material Supply At Auditorium, Mathura Construction of 1000 Capacity Auditorium between Mathura & Vrindavan Distt. Mathura (U.P.) [MATERIAL SUPPLY March-2023]Construction of 1000 Capacity Auditorium between Mathura & Vrindavan Distt. Mathura (U.P.) [MATERIAL SUPPLY March-2023] , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C Foredge Moulding To 30 Mm Thick Red Stone Including Machine Finish Etc. Complete As Per Design Approved By Engineer-In-Charge. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Auditorium Accoustical Doors , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285,With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15). , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Stainless Steel Sliding Door Bolts Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade With Nuts And Screws Etc Complete. (A) 250Mm X 16Mm. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Stainless Steel Towerbolts (Barrel Type) With Necessary Screws Etc. Complete. • 250 Mm X 10Mm , • 200 Mm X 10Mm , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. Complete , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Double Skin Roof Sheeting Top Layer Of Lysaght Trapezoidal Trimdek Profile Sheet Of 1015 Mm Effective Cover Width And Nominal28.5Mmdeepribswithsubtlesquare Fluting In The Five Pans At Nominal 200 Mm Centre To-Centre. The End Rib Shall Be Designed For Anti-Capillary Action, To Avoid Any Seepage Of Water Through The Lateral Overlap. The Feed Material Is Manufactured Out Of Nominal 0.50 Mm Total Coated Thickness (Tct), Hi-Tensile Steel With Min. 550 Mpa Yield Strength, Metallic Hot Dip Coated With Aluminum-Zinc Alloy (55% Aluminum, 45% Zinc) As Per As 1397 - Zincalume Az150 (Min. 150 Gms/Sq.Mt Total On Both Sides). Thereafter Providing Sub Girt In 0.5 Mm Thicknessin Z Shape Of 50 Mm Web And 20 Mm Flange Overbottom Skin Sheet Shall Bepanel Rib Profile Of Lysaght To Be Installed Over Purlins Directly With Self Drilling & Tapping Screws. To Make Air Gap Of 50 Mm For Providing Sandwich Insulation Of 50 Mm Thick Rock Wool Pads Having Density Of 48 Kg/Mtr Cube With Hdpe Vapor Liners On Both Top And Bottom Surface Of Rock Wool. Complete Job With All Hardware, Accessories, Material. The Mode Of Payment For Supply Shall Be; 90% Payment After Procurement And Safe Delivery And Proper Storage Of Material At Site, 5% Payment After Successful Testing And Balance 5% Payment After Successful Commissioning. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Semi (Grid) Unitized System Of Structural Glazing (With Open Joints) For Linear As Well As Curvilinear Portions Of The Building For All Heights And All Levels, Including: B) Supplying Serrated M.S. Hot Dip Galvanised / Aluminium Alloy Of 6005 T5 Brackets Of Required Sizes, Sections And Profiles Etc. To Accommodate 3 Dimentional Movement For Achieving Perfect Verticality Andstructural Glazing System Rigidly To The Rcc/ Masonry /Structural Steel Frame Work Of Building Structure Using Stainless Steel Anchor Fasteners/ Bolts, Nylon Seperator To Prevent Bimetallic Contacts With Nuts And Washers Etc. Of Stainless Steel Grade 316, Of The Required Capacity And In Required Numbers. C) Providing Two Part Pump Filled, Structural Silicone Sealant And One Part Weather Silicone Sealant Compatible With The Structural Silicone Sealant Of Required Bite Size In A Clean And Controlled Factory / Work Shop Environment , Including Double Sided Spacer Tape, Setting Blocks And Backer Rod, All Of Approved Grade, Brand And Manufacture, As Per The Approved Sealant Design, Within And All Around The Perimeter For Holding Glass. D) Providing In Position Flashings Of Solid Aluminium Sheet 1 Mm Thick And Of Sizes, Shapes And Profiles, As Required As Per The Site Conditions, To Seal The Gap Between The Building Structure And All Its Interfaces With Curtain Glazing To Make It Water Tight The Item Also Includes The Cost Of All Mock Ups At Site, Cost Of All Samples Of The Individual Components For Testing In An Approved Laboratory Tests. Note:- 1. The Cost Of Providing Extruded Aluminium Frames, Shadow Boxes, Extruded Aluminium Section Capping Forin The Grooves Of The Curtain Glazing And Vermin Proof Stainless Steel Wire Mesh Shall Be Paid For Separately Under Relevant Items Under This Subhead. However, For The Purpose Of Payment, Only The Actual Area Of Structural Glazing (Including Width Of Grooves ) On The External Face Shall Be Measured In Sqm. Up To Two Decimal Places. Note:-2. The Following Performance Test Are To Be Conducted On Structural Glazing System If Area Of Structural Glazing Exceeds 2500 Sqm From The Certified Laboratories Accreditated By Nabl(National Accreditation Board For Testing And Calibration Laboratories), Department Of Science & Technologies, India. Cost Of Testing Is Payable Separately. The Nit Approving Authority Will Decide The Necessity Of Testing On The Basis Of Cost Of The Work, Cost Of The Test And Importance Of The Work. Performance Testing Of Structural Glazing System Tests To Be Conducted In The Nbl Certified Laboratories The Mode Of Payment For Supply Shall Be; 90% Payment After Procurement And Safe Delivery And Proper Storage Of Material At Site, 5% Payment After Successful Testing And Balance 5% Payment After Successful Commissioning. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C, Providing/ Supplying Vision Glass Panels (Igus) Comprising Of Hermetically-Sealed 6-12- 6 Mm Insulated Glass (Double Glazed) Vision Panel Units Of Size And Shape As Required And Specified, Comprising Of An Outer Heat Strengthened Float Glass 6Mm Thick, Of Approved Colour And Shade With Reflective Soft Coating On Surface # 2 Of Approved Colour And Shade, An Inner Heat Strengthned Clear Float Glass 6Mm Thick, Spacer Tube 12Mm Wide, Dessicants, Including Primary Seal And Secondary Seal (Structural Silicone Sealant) Etc. All Complete For The Required Performances, As Per The Architectural Drawings, As Per The Approved Shop Drawings, As Specified And As Directed By The Engineer-In-Charge. The Igus Shall Be Assembled In The Factory/ Workshop Of The Glass Processor. For Payment, Only The Actual Area Of Glass On Face # 1 Of The Glass Panels (Excluding The Areas Of The Grooves And Weather Silicone Sealant) Provided And Fixed In Position, Shall Be Measured In Sqm (I) Coloured Tinted Float Glass 6Mm Thick Substrate With Reflective Soft Coating On Face # 2, + 12Mm Airgap + 6Mm Heat Strengthened Clear Glass Of Approved Make Having Properties As Visible Light Transmittance (Vlt) Of 25 To 35 %, Light Reflection Internal 10 To 15%, Light Reflection External 10 To 20 %, Shading Coefficient (0.25-0.28) And U Value Of 3.0 To 3.3 W/M2 Degree K Etc. The Properties Of Performance Glass Shall Be Decided By Technical Sanctioning Authority As Per The Site Requirement. 1. Performance Laboratory Test For Air Leakage Test (-50Pa To – 300Pa) & (+50Pa To +300Pa) As Per Astm E-283-04 Testing Method For A Range Of Testing Limit 1 To 200 Mvhr” 2. Static Water Penetration Test. (50Pa To 1500Pa) As Per Astme- 331-09 Testing Method For A Range Up To 2000 Ml.” 3. Dynamic Water Penetration (50Pa To 1500Pa) As Per Aama 501.01- 05 Testing Method For A Range Upto 2000 Ml” 4. Structural Performance Deflection And Deformation By Static Air Pressure Test (1.5 Times Desing Wind Pressure Without Any Failure) As Per Astme-330-10 Testing Method For A Range Upto 50 Mm” 5. Seismic Movement Test (Upto 30 Mm) As Per Aama 501.4-09 Testing Method For Qualitative Test” Tests To Be Conducted On Site 6. Onsite Test For Water Leakage For A Pressure Range 50 Kpa To 240 Kpa (35Psi) Upto 2000Ml” The Mode Of Payment For Supply Shall Be; 90% Payment After Procurement And Safe Delivery And Proper Storage Of Material At Site, 5% Payment After Successful Testing And Balance 5% Payment After Successful Commissioning. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Collapsible Steel Shutters With Vertical Channels 20Xl0x2mm And Braced With Flat Iron Diagonals 20X5mm Size With Top And Bottom Rail Of T-Iron 40X40x6mm With 40Mm Dia, Steel Pulleys Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Applying A Priming Coat Of Approved Steel Primer. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Wooden Flooring In Longstrip Form With Top Connect Locking System Product Should Be 100% Pefc Certified (I) Total Thickness:13.5 Mm (Ii) Top Layer Thickness:3.5 Mm (Iii) Dimensions:180 Mm Width And 2200 Mm Length 3 Layer Construction With Soildwood Strip Middle Layer And Backing Board Of Softwood Veneer Installation And Fully Glued Down With Glue On Thickness Of Plywood Subfloor. Haro/ Quick Step /Khars / Equivalent. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Auditoriumacousticalfalse Ceiling False Ceiling Acoustical Tiles Of Armstrong Make Classiclite Microlook/ Insula Make With Nrc 0.9 Of Size 595 X 595 Mm 15 Mm Board Edge In True Horizontal Level Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanizedsteel Sections ( Galvanized @ 170 Gsm/Sqm) Consisting Of Main “T” Runner Suitably Spaced At Joints To Get Required Length And Of Size 24 X 38 Mm Made From 0.25Mm Thick(Minimum) Sheet, 1200 Mm Long Spaced Between Main “T” At 600 Mm Center To Center To Form A Grid Of 1200 X 600 Mm & Secondary Cross “T” Of Length 600 M & Size 24 X 25 Mm Made Of 0.30 Mm Thick ( Minimum) Sheet To Be Interlocked At Middle Of The 1200 X 600 Mm Panel To Form Grids Of 600 X 600 Mm & Laying False Ceiling Tiles Of Approved Textures In The Grid Including, Wherever, Required, Cutting/Making, Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main “T” Runners To Be Suspended From Ceiling Using G.I. Slotted Cleats Fixed Totrusses With Galvanized Level Clips Spaced At 1200 M Center To Center Along With Main “T”Bottom Exposed Width Of 24Mm Of All T- Sections Shall Be Pre- Painted With Polyster Paint All Complete Including Combination Of Gysum Board Bands With Cope Light Provision Installed On Gi Metal Frame Work As Per Dsr Norms At All Heights As Per Specifications Drawings & As Directed By Engineer –In – Charge At An Height Of 6 Mtr In Auditorium Including Scaffolding, Lead Lift Taxes Complete Job With Materialand L Angle Hanger Of Desire Length. The Mode Of Payment For Supply Shall Be; 90% Payment After Procurement And Safe Delivery And Proper Storage Of Material At Site, 5% Payment After Successful Testing And Balance 5% Payment After Successful Commissioning. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For False Ceilingfor Corridors, Passages, Green Room Etc. False Ceiling Acoustical Tiles Of Armstrong/Usg/ Make Classiclite Microlook/ Insula Make With Nrc 0.5 Of Size 595 X 595 Mm 15 Mm Board Edge In True Horizontal Level Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanizedsteel Sections ( Galvanized @ 170 Gsm/Sqm) Consisting Of Main “T” Runner Suitably Spaced At Joints To Get Required Length And Of Size 24 X 38 Mm Made From 0.25Mm Thick(Minimum) Sheet, 1200 Mm Long Spaced Between Main “T” At 600 Mm Center To Center To Form A Grid Of 1200 X 600 Mm & Secondary Cross “T” Of Length 600 M & Size 24 X 25 Mm Made Of 0.30 Mm Thick ( Minimum) Sheet To Be Interlocked At Middle Of The 1200 X 600 Mm Panel To Form Grids Of 600 X 600 Mm & Laying False Ceiling Tiles Of Approved Textures In The Grid Including, Wherever, Required, Cutting/Making, Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main “T” Runners To Be Suspended From Ceiling Using G.I. Slotted Cleats Fixed Totrusses With Galvanized Level Clips Spaced At 1200 M Center To Center Along With Main “T”Bottom Exposed Width Of 24Mm Of All T- Sections Shall Be Pre- Painted With Polyster Paint All Complete Including Combination Of Gysum Board Bands With Cope Light Provision Installed On Gi Metal Frame Work As Per Dsr Norms At All Heights As Per Specifications Drawings & As Directed By Engineer –In – Charge At An Height Of 6 Mtr In Auditorium Including Scaffolding, Lead Lift Taxes Complete Job With Material & Labour The Mode Of Payment For Supply Shall Be; 90% Payment After Procurement And Safe Delivery And Proper Storage Of Material At Site, 5% Payment After Successful Testing And Balance 5% Payment After Successful Commissioning. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Auditorium Acoustical Flooringsynthetic Polypropylene 100% Bcf Carpethaving Bulk Continuous Filament Yarn Which Should Be Solution Dyed Of 2.54 Mm Gauge (39.4 Rows/100 Mm Of Stitch Rate 48/10 Cms Loop Pile High Low Scroll Of Density Factor Of 189600 Tufts/Mtr Sq. With Tufted Pile Weight Of 650 Gms / Mtr Sq. (+/- 5%) Having Primary Backing Of Woven Polypropylene And Secondary Backing Of Action Back With Naturally Moth Resistant Properties And Bond Strength Of 30 New Ton And Tuft Withdrawal Strength Of 20 Newton And Fire Flammability Conforming To Astm D 2859-96 & Cpsc-Ff-170) 8 Passes . The Static Generation Of This Carpet Should Not Be More Than 3 Kv And Light Fastness To Be 5+ For Usage Of Commercial Heavy Duty In Width Of 3.66 Mtrs. Brand Unitex Splendour On The Floors Of Auditorium With Under Linear Ofe.P. Pkg. Foam 10Mm Thick,Below The Carpet Which Shall Be Cut To The Size And Pasted In Circular Shapes As Per Site Requirements And Pasted With Favicol /Equivalent Make Synthetic Adhesive. Carpet Used Should Be Unitex Make Ofuniproduct (India)Ltd.In Dark Brown Colour Or As Approved By Architect In-Charge The Entire Job Is Inclusive Of Freight, All Taxes ,Lead And Lift, All Wastages, Cleaning Of Cc Floor To Make It Dust Proof Before Applying Adhesive Coats. The Mode Of Payment For Supply Shall Be; 90% Payment After Procurement And Safe Delivery And Proper Storage Of Material At Site, 5% Payment After Successful Testing And Balance 5% Payment After Successful Commissioning. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Auditorium Acoustical Wall Paneling Armstrong Channeled Woodworks Perforated Panels Of Width 128Mm, Thickness Of 16Mm And Length 2440 Mm, Made Of A High Density Particle Board Substrate With A Laminated Facing As Per The Approved Shade/ Species & Finish And A Melamine Balancing Layer On The Reverse Side. The Boards Shall Have A Special Perforation Pattern Where The Visible Surface Has A (“Helmholtz” Fluted Perforation Of 2Mm Width And 14Mm Of Visible Panel / 4Mm Width And 28Mm Visible Panel) Each. The Panels Shall Provide A Minimum Sag Resistance Of Rh90 And A Fire Rating Class Of 1 As Per Part 7 Of Bs 476. The Edges Of The Panels Shall Be “Tongue-And-Grooved” To Receive Special Clips For Installation. The Back Of The Perforated Panel Shall Have Sound Absorbing Non-Woven Acoustical Fleece. The Panels Shall Be Mounted On Special Aluminum Spines Using Clips Provided By Armstrong And Approved By The Architect/ Engineer-In-Charge. This Wood Work Shall Be Provided On Walls Upto Level Of 4880 Mm From Floor Level Over Company Made Aluminum Spines And Sandwiching 50 Mm Thick 24 Kg / Mtr. Density Cube Rock Wool Acoustical Backing. The Mode Of Payment For Supply Shall Be; 90% Payment After Procurement And Safe Delivery And Proper Storage Of Material At Site, 5% Payment After Successful Testing And Balance 5% Payment After Successful Commissioning. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Cat Walk Above & At Facia Of Stage: M.S.Hollow Tubular Catwalk’S As Per Drawing And Design, Brc Netting Of 50Mm X 50 Mmx26 Gauge And Century Make 12 Mm Thick Bwp Multilayer Ply. The Catwalk Shall Be Primered And Painted With Synthetic Enamel To Give Smooth Finish In Z Black Colour Al Around Complete Job. At An Heightof12 M. The Job Also Includes Making Of Ms Hollow Tube Railings And Attachments / Brackets. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Proscenium: Sound & Light Effects Management Equipment Made In Ms Hollow Tubular Section Of 50 X 50 X 2Mm And Bracings Of 40X40x 2Mm And Installed At Fascia Of Stage With Necessary Dash Fasteners At Floor Level And Rigidly Fixed To Wall And Cladded With 12Mm Thick Bwpisi Make Multilayer Marine Ply With 4Mm Thick Teak Veneerply And Walnut Melamine Polish And Necessary Teak Wood Beadings Complete Job. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Auditorium Chairs With Push Back Width Of 21 Inches Centre To Centre. The Frame Work Of Chair Shall Be Of Heavy Duty Mild Steel Sheets Powder Coated In Black Matt Colour Having High Density Pre Machine Moulded Pu Foam Seat And Back Of 50 Kg/Mtr Cube Density. Theauditorium Chair Shall Be Fully Upholstered With Reliance Make Fire Retardant Cloth In Approved Colour And Shade . The Armrest Of Auditorium Chair Shall Be Of Black Moulded Polyurethane Without Glass Holder. The Chairs Are To Be Installedwith Help Of Required Dash Fastners And Washers To The Cc Floor . Complete Job With Material Including All Taxes, Freight Lead And Lift As Per Directors Ofengineer In-Charge. The Mode Of Payment For Supply Shall Be; 90% Payment After Procurement And Safe Delivery And Proper Storage Of Material At Site, 5% Payment After Successful Testing And Balance 5% Payment After Successful Commissioning. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Cyclorama Screen At Rear Side Of Stage As Per Required Size At Sitemade Of Ms Tubularsteel Frame And Finishedwithwhite.Smooth Finish White Fabric Screen. The Mode Of Payment For Supply Shall Be; 90% Payment After Procurement And Safe Delivery And Proper Storage Of Material At Site, 5% Payment After Successful Testing And Balance 5% Payment After Successful Commissioning. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Acp Sheet Cladding On Front Panels Of Polycarbonate Skylights , Dressing Room, Porches,Roof Bottom Of Trusses Including Cutting,Making Alunium Sub Frame Of 38X25x1.2 Mm Thickness Including All Hardware, Silicone Complete. The Mode Of Payment For Supply Shall Be; 90% Payment After Procurement And Safe Delivery And Proper Storage Of Material At Site, 5% Payment After Successful Testing And Balance 5% Payment After Successful Commissioning. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C Ductile Iron Pipe (Class-K7, Dia-100 Mm)Di K-7 Flanged Pipe With Fitting & Gasket , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C Duckfoot Bends With Flanged Ends 90 Degree , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C Gi Pipe, 20Mm Dia. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C Threaded 20Mm Gi Socket, 20Mm Dia. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C U-Hook , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C 200 Mm Dia. Ms Pipe (M) , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C 150 Mm Dia. Ms Pipe (M) , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C Chicken Wire Mesh , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Air Conditioner (High Side Work): Sitc Of Air- Cooled Ductable Split Type Air Conditoning Machine Consisting Of Condensing Units, Ms Stand For Odu, Complete With Blower Sections With Motor And Drive, Dx Coils, Motor Mated Freon Scroll/ Rotary/ Twin Rotary Compressors, Centrifugal Blowers For Evaporator Units, High And Low Pressure Cutouts Thermostatic Control, All The Items Equipment Encased In A Metallic Cabinet Having Powder Coated Finish. Complete Job Including Micro Processor Control Of Normal Capacity Of Hitachi/ Daikin Make Electrical Control Panel Indicating Lights And Control Switches. The Mode Of Payment For Supply Shall Be; 90% Payment After Procurement And Safe Delivery And Proper Storage Of Material At Site, 5% Payment After Successful Testing And Balance 5% Payment After Successful Commissioning. (32 To 45) (I) Dsac - 3 Phase Units • 16.5 Tr Scroll Comp. Dsac (With Three Compressor) , • 11 Tr Scroll Comp. Dsac (With Three Compressor) , (Ii) Flexi Splits Splits-1/3 Phase Units (I) Condenser • 3.0 Tr Condenser (With Twin Compressor) - For Any 2 Indoor Of 1.5 Tr Capacity , • 4.0 Tr Condenser (With Twin Compressor) - For Any 2 Indoor Of 2.0 Tr Capacity , • 5.0 Tr Condenser (With Twin Compressor) - For Any 2 Indoor Of 2.5 Tr Capacity , • 7.5 Tr Condenser (With Twin Compressor) - For Any 2 Indoor Of 2.5 Tr Capacity , (Ii) Evaporator Muliple Type- 1 Phase Units • 1.5 Tr Hat With Canvass , • 2.0 Tr Hat With Canvass , • 2.5 Tr Hat With Canvass , • 1.5 Tr Compact Cassette (2X2) , • 2.0 Tr Compact Cassette (2X2) , • 2.5 Tr Compact Cassette (3X3) , (Iii) Concealed Splits - 1 Phase Units • 1.5 Tr Hat With Canvass (Complete With Single Compressor) , • 2.0 Tr Hat With Canvass (Complete With Single Compressor) , Air Conditioners (Low Side Work):- Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Refrigeration Copper Piping Between Indoor And Outdoor Units Duly Insulated Assuming 10 Rmt Per Ckt The Mode Of Payment For Supply Shall Be; 90% Payment After Procurement And Safe Delivery And Proper Storage Of Material At Site, 5% Payment After Successful Testing And Balance 5% Payment After Successful Commissioning. • For 5.5 Tr/ 4.25 Tr Ckt , • For 2.5 Tr Ckt , • For 2.0 Tr/ 1.5 Tr Ckt , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Ducts Made Out Of G.S.Sheets Of Sail/Tata/Jindal/Ispat Make For Supply Air Complete Job As Per Detailed Drawings Including Suspension From Rcc Ceiling With Ms Hangers, Ms Angle Steel Rawl Plugs, Fasteners (Up To Duct Hanging Ht Up To 12 Ft) • 24 Gauge , • 22 Gauge , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Ducts Made Out Of G.S.Sheets Of Sail/Tata/Jindal/Ispat Make For Supply Air Complete Job As Per Detailed Drawings Including Suspension From Rcc Ceiling With Ms Hangers, Ms Angle Steel Rawl Plugs, Fasteners (Up To Duct Hanging Ht Up To 12 Ft, For Exceed Ht Upto 30-32 Ft The Rates Above 32 Ft ) • 24 Gauge , • 22 Gauge , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Thermal Insulation Of The Supply Air Ducts With 9 Mm Thick Nitrile Rubber Sheet Or With 9 Mm Thick Closed Cell Cross Linked Poly Ethyelin (Xlpe) (Up To Duct Hanging Ht Up To 12 Ft: For Exceed Ht The Rates Shall Be 30% Extra Of Rates) , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Accoustic Lining Of Supply Air Duct With 12Mm Thick Fiber Coverwd With, Al. Flymesh G.I. Nuts & Bolts. Complete Job (Up To Duct Hanging Ht Up To 12 Ft: For Exceed Ht The Rates Shall Be 30% Extra Of Rates) , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Supply & Erection Of Under The Deck Insulation For Roofs With Fire Expanded Polystyrine Sheet Of Density 24Kg/M3, 50 Mm Thick, Roof Fixed With Pvc Rawl Plug, For 12 Ft Height Site , For Starting (2Mt.) Supply Air Duct Only Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Supply & Erection Of Acoustic Lining For Ahu Rooms With Fire Retardant Fiber Glass (Tf Quality) Of Density 24 Kg/M3, 50 Mm Thick, Sealed In Rp Tissue Paper And Final Finished With Perforated Aluminium Sheet In G.I. Frame On Wall/ Roof Fixed With Pvc Rawl Plug. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Grilles: Aluminium Extruded Section Powder Coated Supply/ Return Air Grills & Diffusers , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Ms Aluminium Colour Coated Volume Control Duct Damper - 22 Gauge , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Ms Black Enamel Coated Volume Control Coller Damper For Supply Air Grills & Diffusers - 24 Gauge , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Drain Piping With Pvc Hard Pipes Upto 25Mm Dia. With All Accessories E.G. Elbows, Unions, Sockets, Reducers, Reducing Tees, Reducing Elbows, Tees, Nipples Etc. Complete Near Trap/Gully Trap As Per Site Conditions 5 Rmt Per Ckt , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Canvass Connection Double Layer , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Fresh Air Intake Arrangements Complete With Louver, Bird Screen & Volume Control Damper , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Electric Cabling From Indoor Units & Outdoor Units From Panel • For Idu To Odu Electrical Cable 2.5 Sqmm 4 Core , • For Communication Cabling For Control , Supply Of 80Mm Thick Coloured Interlocking Tiles I Shaped 30 Mpa. , Supply Of Material For Proper Completion Of The Work As Directed By Engineer I/C For Stainless Steel Handles With Screws Etc. Complete (A) 125 Mm.
|
