Tenders Are Invited For Itb Fairmont Community Center Gymmasium Wood Flooring Supply All Materials And Labor For Installation Of A Floating Panel System Maple Woodsports Floor Consisting Of A Vapor Barrier Cushion Resilient Pads Wood Sub Floorunderlayment And Maple Hardwood Flooring Installation Is To Include Sanding Sealing Laying Out Of Game Lines And Logos Painting Final Finish Application Installation Of Wall Base And Transition Ramping Of Any Entry Areas The New Wood Floor Will Be Installed Over An Existing Vinyl Resilient Tile Floor The Floor Area Is Approx 8500 Sf Installation Will Also Include Installing 2 Volleyball Stanchion Sleeves Wood Utilized Shall Be Grade 3 Or Better Material Vapor Barrier 6 Mil Polyethylene Cushion Pads Minimum Of 3 4 Thickness Subfloor 2 Layers Of 15 32 Plywood Panels 4 By 8 Hardwood 25 32 By 2 1 4 Second And Better Mfma Maple Stamped Cove Base 3 By 4 Vented Rubber Base Heavy Duty Molded Paint Sherwin Williams Industrial Enamel Seal And Finish Momar Gym Thane High Solids Hardware Fasteners Coated Staples Nails Or Barbed Cleats Installation Of The Floor Will Be Over The Existing Resilient Tile Flooring The Existing Floor Will Be Inspected For Level Tolerance With Any Areas Out Of Accepted Range Brought Within Tolerance By Filling With Ardex Material As Needed Install 6 Mil Poly Vapor Barrier Sealing And Lapping All Joints Install Resilient Pads To Underside Of The Bottom Layer Of The Subfloor By Stapling Pads Over The 4 By 8 Sheet 12 Apart And 6 From The Edge 32 Total Per Sheet Provide Minimum Of 2 Expansion Voids At The Perimeter And Any Vertical Obstructions Install The Second Layer Of Subfloor Over The First Layer At The Proper Angle With Correct Spacing At All Joints Fastening With Coated 1 Fasteners Install Maple Flooring By Power Nailing Or Stapling 10 12 On Center With End Joints Properly Driven Up Provide Expansion Joints Throughout The Floor At The Proper Distance To Allow For Local Humidity Conditions Provide 2 Expansion Voids At Perimeter And At All Vertical Obstructions Machine Sand The Entire Floor Surface Area Using Riding Vacuum Sanders And Walk Behind Vacuum Sanders With Coarse Medium And Fine Paper To Bring The Floor To A Smooth Slick Even And Uniform Surface Hand Sand And Edge Any Obstructed Wall And Door Areas To Create A Uniform Floor Surface Vacuum And Tack The Entire Floor Area Inspect The Floor Surface Area To Insure The Floor Is Ready For Seal Finish Application Apply 2 Coats Of Momar Gym Thane High Solids Seal And Finish Screening The Floor With A Weighted Orbital Floor Machine And Vacuuming And Tacking Between Coats Layout And Tape All Game Lines And Logos For Painting Game Lines Shall Consist Of High School Basketball Volleyball And 2 Pickleball Courts Final Colors And Layouts Must Be Approved In Writing By The Leisure Services Division Paint All Taped Areas With Sherwin Williams Industrial Enamel Paint Double Coating Where Necessary Remove All Tape And Debris Screen The Floor With A Weighted Orbital Scrubber Equipped With A Maroon Ecoprep Pad Vacuum And Tack The Entire Floor Apply 2 To 3 Final Coats Of Momar Gym Thane High Solids Finish To The Floor Install Vent Cove Base To Walls Install Thresholds Or Ramps At Entry Points Install 2 Volleyball Sleeves
Contact Information
Other Detail
View Notice Now...
Fill Detail for Getting Instant Access
Download Tender Document / Tender Notice
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 14838319
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.