Tenders Are Invited For Purchase Of A Spindle Mower in Poland

Work Detail

1. The Subject Of The Order Is The Purchase And Delivery Of A Brand New (Year Of Production: Not Earlier Than 2025), Free From Manufacturing And Legal Defects, Self-Propelled Three-Section Spindle Mower For The Care Of Stadium Turfs In Accordance With All Requirements Specified In The Form For The Offered Spindle Mower (Detailed Technical Description) Constituting Annex No. 1A To Swz.2.Description Of The Subject Of The Order:2.1.General And Construction Requirements: A) Construction Type: Self-Propelled Mower, Three-Wheeled Or Four-Wheeled, Based On A Welded And Reinforced Steel Frame, Dedicated To Professional Sports Turfs, Providing The Operator With Good Visibility Of The Terrain And Cutting Units (The Engine May Be Located At The Front Or Rear Of The Machine); B) Chassis And Drive: Permanent Or Automatically Engaged All-Wheel Drive (3Wd Or 4Wd) Ensuring Traction On Slopes And Preventing Wheel Slippage On Wet Turf;C) Steering System: Hydraulic Power Steering With The Ability To Adjust The Position Of The Steering Column Or Seat To The Operators Height;D) Tires: Turf Type (Smooth Or Gentle Grass Tread) Minimizing The Unit Pressure On The Ground And Preventing Damage To The Turf.2.2.Engine And Operating Parameters: A) Fuel Type: Diesel Engine, Liquid-Cooled; B) Engine Power: Min. 19 Hp (Approx. 14 Kw); C) Mowing Speed: Smoothly Adjustable, Ranging From 0 To Min. 8 Km/H;D) Safety: Equipped With A Factory Safety Frame (Rops) With A Seat Belt And A Security System (Interlock) That Turns Off The Spindle Drive If The Operator Leaves The Seat;E) Exhaust Emissions: In Accordance With The Applicable Stage V Standard Or Equivalent.2.3.Cutting System: A) Number Of Cutting Sections: 3 Independent Spindle Units Suspended By Articulation, Copying Terrain Unevenness; B) Cutting Width: Min. 180 Cm (Width In The Range Of 180-215 Cm Is Allowed);C) Spindle Design:D) Number Of Knives On The Spindle: Min. 7 Pieces On Each Spindle;E) Diameter Of A Single Spindle: Min. 12 Cm (Or Min. 4.5 Inches); F) Cutting Height: Precisely Adjustable From Max. 12 Mm To Min. 40 Mm (E.G. 10–45 Mm);G) Spindle Drive: Hydraulic, Can Be Switched On From The Operators Position;H) Spindle Speed: Hydraulically Adjustable, Enabling Adjustment Of The Cutting Frequency To The Turf Conditions (Regardless Of The Driving Speed Or Through The Cutting Frequency Control System);I) Additional Section Equipment: Each Section Equipped With Front Rollers (Smooth Or Corrugated) And Rear Smooth Rollers (With The Option Of Scrapers/Brushes Cleaning Agents) Tightening The Turf.3.The Contractor Will Deliver The Subject Of The Agreement Together With: 3.1.Two Sets Of Keys;3.2.Technical Documents, Certificates And Declarations Of Conformity;3.3.Operation And Maintenance Instructions;3.4.Warranty Document And Service Book (If Applicable).

Contact Information