|
Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - 44 Replacement Of Damaged Lt Cable For Service Connection At Gardadi; Electrical System Or Installation; Service Provider - Supplying And Fixing 3Nos - 63 Amps 415 Volts Porcelain Fuse Cutouts With Neutral Link In Existing Smc Box And Interconnections Etc As Reqd , S & F Of Pot Head Suitable For 4 Core 16 Sqmm Ug Cable I/C Providing Suitable Clamp On Bescom Pole Etc Complete As Required , Supplying And Fixing 100A Aerial Fuse Cutout- 3Nos & 1No Neutral Link With Dmc/Frp Sheet & With Clamp Suitable For 415 Volts 50Hz Ac Supply Etc Complete As Reqd. (Mescom Approved Make) , Supplying And Fixing Ms Frame Work Made Of 25Mm X 25Mm X 5 Mm Ms Angle For Supporting The Roofing Above Meterboard Including Cutting Welding Drilling Holes Painting Etc. As Reqd , Supplying And Fixing 0.5Mm Thick Nominal Gi Corrugated Roofing Sheet On The Existing Frame Work Including Necessary Nuts Bolts Washers Tar Washers And Cutting To The Required Shape And Dimensions Providing Necessary Holes , Top Angle Sheet Etc. As Reqd , S/F The 40Mm Dia B Class Gi Pipe For Cable Protection In Ground/Mescom Pole. Including Grouting , Cutting, Digging /Clmping On Pole For Cable Protection Including Trench,Refilling Etc… As Reqd. , Supplying And Fixing 63A 4Pole Change Over Switch With Sheet Steel Enclosure Etc As Reqd . Including Testing , Commissioning Etc.. As Reqd(Make : Hpl Socomec ) , Supplying And Laying Of 4X16sqmm Al Conductor Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade With Isi Mark In The Existing Masonry Open Duct As Required. , Supplying And Laying Of 4X16sqmm Al Conductor Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade With Isi Mark In The Existing Pipe As Required. , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. A) 4 X16 Sqmm , Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator).A)4 Way (4 +12), Double Door , Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) Single Pole , Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. , Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) 63 , Supplying And Fixing Following Rating, Four Pole, (Three Phase And Neutral), 415 Volts, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 300 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) 63 , S&F Of 10W Led Type Bulkhead Fitting Made Of Polycarbonate With 9 Watt Led Bulb Etc Complete As Reqd.(Crompton/Philips/Havells Or Ss Make) , Supplying And Fixing Cable Route Marker With 10 Cm X 10 Cm X 5 Mm Thick G.I. Plate With Inscription There On, Bolted /Welded To 35 Mm X 35 Mm X 6 Mm Angle Iron, 60 Cm Long And Fixing The Same In Ground As Required.
|
