Tenders Are Invited For Design And Execution Of Construction Works For The Task: Development Of Bicycle And ... in Poland

Work Detail

The Task Includes The Preparation Of A Construction Design (Pzt And Architectural-Construction Design), Reconstruction Of Existing Lighting And Construction Of Lighting For Pedestrian Crossings, Along With Obtaining The Necessary Arrangements And All Administrative Permits And Consents Resulting From The Construction Law, As Well As Developing A Technical Design Together With Stwiorb. The Scope Of Work Includes Lighting Along The Streets: A) Ul. Miarki – Synagogue Square B) Ul. Wyzwolenia C) Ul. Rybnicka D) Ul. Pokoju E) Ul. Bandurskiego F) Ul. Fabryczna G) Ul. Żwirki I Wigury And Construction Of Lighting For Pedestrian Crossings: A) Ul. Miarki – Synagogue Square – 4 Pedestrian Crossings B) Ul. Wyzwolenia – 4 Pedestrian Crossings C) Ul. Rybnicka – 4 Pedestrian Crossings D) Ul. Pokoju – 2 Pedestrian Crossings E) Ul. Bandurskiego – 8 Pedestrian Crossings F) Ul. Fabryczna – 3 In Pedestrian Crossings G) Ul. Żwirki I Wigury – 5 Pedestrian Crossings. In Total, The Scope Of The Order Includes Lighting 30 Dedicated Pedestrian Crossings (Pdp) And Comprehensive Reconstruction Of The Lighting Of Adjacent Roads, Bicycle Paths And Sidewalks. To Design Lighting, A Detailed Analysis Of Road And Traffic Parameters (Traffic Intensity, Design Speed, Geometry, Presence Of Mixed Traffic) Should Be Performed In Accordance With The Pn-En 13201-2 Standard And The Wr-D-41-4 Guidelines. And Develop Detailed Photometric Calculations And Simulations In Dialux Or Relux Software For Each Characteristic Cross-Section Of The Road, Bicycle Path And Pedestrian Crossing. . The Lighting Should Be Based On Fixtures Equipped With Led Sources, Which Will Be Mounted On Aluminum Lighting Poles Placed On Prefabricated Foundations. The Luminaires Will Be Equipped With Zhaga Standard Sockets, A Power Supply With Autonomous Reduction (Lighting On - Until 11 P.M. - 100% Power, 11 P.M. Until 5 A.M. - 70% Power, 5 A.M. Until Lighting Off - 100% Power), Power Supply Programmed Via Nfc. The Luminaires Should Allow Integration With The Exedra Master Control System From Schreder. The Purchase Of Controllers For The Luminaires And Integration With The Exedra System Operating In The Mikołów Commune Is Required. In Terms Of Power Regulation, Luminaires Must Ensure A Power Factor Within The Standards Of Tauron Dystrybucja S.A. The Street Lighting Installation Will Be Cabled And Powered From The Street Lighting Cabinet Built As Part Of The Task. Cables Along Their Entire Length Should Be Routed In Protective Pipes. Fezn Tape, Min. 4X25, Should Be Placed Along The Cable Routes To Ground The Poles. To Illuminate Pedestrian Crossings, Lighting Should Be Designed In Accordance With The Guidelines For The Design Of Pedestrian Infrastructure. Part 4: Design Of Lighting For Pedestrian Crossings (Wr-D-41-4). Use Aluminum, Anodized Poles, Built On A Prefabricated Foundation; The Foundation Must Be Approved For Use By The Pole Manufacturer. Led Fixtures With Asymmetric Optics Dedicated To Illuminating Pedestria

Contact Information