Tenders Are Invited For Thermal Modernization Using Renewable Energy Sources Of The Building Of The Independ ... in Poland

Work Detail

1) The Subject Of The Order Is Comprehensive Design And Execution Of Construction And Installation Works: The Scope Of The Order Includes In Particular: A) Development Of Complete Design Documentation Along With The Required Arrangements, Opinions, Notifications And Formal Legal Documents; B) Preparation Of A Pre-Design Construction, Installation, Electrical, Structural And Energy Inventory; C) Verification Of The Existing Heat Source, Fuel Installation And Facilities Powered By The Existing Boiler Room; D) Execution Of Hydraulic, Automatic, Electrical And Measurement Separation Of The Installation Of The Building Covered By The Project From The Second Building Of The Clinic, Leaving The Existing Oil Boiler Room And Fuel Installation For The Second Building To The Extent Necessary For Further Power Supply; E) Insulating The Flat Roof With A Reference Area Of 491.63 M² With 25 Cm Thick Polystyrene Foam With A Coefficient Of Λ = 0.038 W/Mk Or An Equivalent Solution Ensuring Parameters Not Worse Than The Audit Ones; F) Insulating The External Walls Using The Method Light Wet Eps Boards With A Thickness Of 16 Cm And A Coefficient Of Λ = 0.036 W/Mk; The Reference Area For Thermal Calculations Is 1,180.54 M², And The Reference Area For Works And Valuations Is 1,239.57 M²; In The Plinth Zone And Near The Ground, Xps And Moisture-Proof Insulation Should Be Used;G) Replacement Of Window Joinery With A Reference Area Of 192.53 M² With Joinery With A U Of Not More Than 0.9 W/M²k, With Hygro-Controlled Air Vents;H) Replacement Of External Doors With A Reference Area Of 13.70 M² With Doors With A U Of Not More Than 1.3 W/M²k;I) Modernization Of The Central Heating Installation, Including Replacement Of Radiators, Shut-Off And Thermostatic Fittings And Piping, Allowing For Leaving The Existing Pipes Only If Their Technical Condition And Hydraulic Calculations Confirm Such Possibility;J) Modernization Of The Domestic Hot Water Installation;K) Replacement Of The Existing Heat Source With A System Of Air/Water Compressor Heat Pumps, Electrically Driven, Composed Of A Single Unit Or A Cascade Of Units, With A Total Rated Heating Power Of At Least 72 Kw According To En 14511 In Point A7/W55;L) Modernization Of Built-In Internal Lighting By Using Led Fixtures;M) Construction Of An On-Grid Photovoltaic Installation With The Total Installed Power Of Photovoltaic Modules On The Dc Side From 49.00 Kwp To 49.49 Kwp, For Which The Design Documentation Will Show The Forecast Annual Net Electricity Production On The Ac Side At A Level Of Not Less Than 49,000 Kwh/Year; N) Performance Of All Accompanying Works, Security, Tests, Measurements, Commissioning And Activities Necessary For The Proper Performance (Including User Training), Commissioning, Acceptance And Handover Of The Investment Subject, Including In Particular: - Full Surveying Services Including As-Built Inventory, - Tests, Tests And Measurements Required By Law And Technical Documentation, - Preparation And Hando

Contact Information