|
Brake Pad For Disc Service Brake For Front Loader (Rectangular Type, Two Fingers). Catalog Number: 4120001739016 (Or Equivalent With Cross Numbers: 4110000012013, Js-Zl50-012, 408107-108, 36C0004). Dimensional Parameters: Total Length Of The Steel Base - From 205 To 212 Mm (Nominal - 210 Mm); Total Height (Width) - From 108 To 112 Mm (Nominal - 110 Mm); The Total Thickness Of The New Pad Assembly Is From 18 To 20 Mm. Product Weight - From 2.0 To 2.4 Kg. Technical Requirements: The Friction Material Must Have High Heat Resistance, A Stable Coefficient Of Friction When Heated And Increased Wear Resistance. The Connection Of The Lining To The Steel Substrate Must Be Made By Hot Molding Under Pressure, Eliminating The Risk Of Detachment Of The Friction Part During Operation. Clear Markings Are Required On The Surface Of The Product Or Packaging. Quality And Standards: The Product Must Be New, Not Used, Not Refurbished, Manufactured No Earlier Than 2025/2026. The Product Must Comply With The Safety Requirements Of Tr Cu 010/2011 “On The Safety Of Machinery And Equipment” (Or Gost 34812-2022 Regarding General Technical Conditions For Brake Linings), With The Provision Of Supporting Documents (Declaration/Certificate) Upon Delivery. Warranty: The Warranty Period For The Product Is At Least 12 Months From The Date Of Signing The Acceptance Certificate., Set Of Original Brake Pads (Friction Linings) For Motor Grader Shantui Sg21-3. Catalog Number (Oem Article): 224-45-14007. Base (Frame) Material: High-Strength Structural Steel Of Increased Rigidity, Resistant To Deformation Under Peak Temperature Loads. Friction Lining Material: Non-Asbestos Semi-Metallic (Semi-Metallic) Or Metal-Ceramic Friction Composition With High Thermal Conductivity And An Increased Coefficient Of Friction Stability. Resistance To Temperature Conditions: Effective Operation Of The Brake Unit When The Friction Element Is Heated To +400°C Without Loss Of Braking Properties (Fading Effect). Unit Weight (Approximate): About 1.5 Kg. Product Condition: The Product Must Be New, Not Used (In Operation), Not Refurbished, Produced No Earlier Than 2025/2026. Compliance With Gost Iso 6112-2022 (Or Gost 34812-2022) “Road Vehicles. Brake Linings. Analysis Of Friction Materials. The Warranty Period For The Product Is At Least 12 Months From The Date Of Delivery., Original Boot (Dust Ring Of The Brake Caliper Piston) Of The Working Brake System Of The Heavy Motor Grader Shantui Sg21-3. Catalog Number (Oem Article): 224-45-04014. Material: High-Strength, Elastic, Oil- And Petrol-Resistant Rubber (Epdm/Nbr Polymer Composition With Increased Wear Resistance). The Material Must Be Completely Resistant To The Aggressive Effects Of Brake Fluid, Mineral Oils, Road Dirt, Moisture And Reagents. Resistance To Temperature Conditions: Effectively Maintaining Elasticity And Sealing Properties In The Extreme Temperature Range Of Operation Of Special Equipment From -45°C To +150°C Without Cracking Or Hardening. Overall Dimensions (Approximate): 85X85x5 Mm. Unit Weight: About 0.02 Kg. The Product Must Be Strictly Original, From The Manufacturer Of Shantui Special Equipment. Delivery Of Analogues Is Not Allowed. The Product Must Be New, Not Used, Not Refurbished, Manufactured No Earlier Than 2025/2026. The Boot Must Ensure 100% Tightness Of The Assembly, Protecting The Caliper Brake Piston Mirror From Abrasive Dust And Dirt. Compliance With Gost Iso 6112 (Or Applicable International Oem Quality Standards Iso 9001). The Warranty Period For The Product Is At Least 12 Months From The Date Of Delivery And Signing Of The Acceptance Certificate., Bevel Gearbox Of The No-86 Brush Drive Assembly. Original Article Fsit 01.01.000. Contents: Fully Equipped And Ready For Installation On Mtz Municipal Road Equipment, Which Includes A Cast Iron Body Filled With Transmission Oil, A Gear Shaft, Drive And Driven Bevel Gears (Main Pair), Bearings And Seals. The Weight Of The Assembled Gearbox Is Approximately 3.8 Kg, Dimensions - 133 X 133 X 210 Mm. The Supplied Unit Must Be Completely New, Not Used, Mass Produced No Earlier Than 2025–2026. The Lubrication System Of The Unit Is An Oil Bath, And The Internal Volume Of The Housing Must Be Filled With Winter Or All-Season Gear Oil Of Api Gl-5 Class (Sae 80W-90 / 75W-90). The Delivery Set Should Include: Gearbox Assembly With Installed Cuffs And Bearings - 1 Piece, Product Passport With A Mark From The Technical Control Service (Qc) Of The Manufacturer - 1 Piece, Operating And Maintenance Instructions - 1 Piece. Compliance With Gost 31592-2012 “Gearboxes For General Machine-Building Applications. General Technical Conditions. The Warranty Period For The Product Is At Least 12 Months From The Date Of Signing The Acceptance Certificate., Rechargeable Battery (Ab) 6St-190 (Straight Polarity). Type Of Service: Serviced (Presence Of Threaded Filler Plugs On The Top Cover To Control The Level And Density Of The Electrolyte, As Well As For The Possibility Of Adding Distilled Water). Technical Characteristics: Type: 6St-190. Voltage: 12V. Capacity: 190Ah. Starting Current: Not Less Than 1300A. Polarity: Straight (Left Plus / “1”). When Viewed From The Terminals, The Positive Terminal (“+”) Is Located On The Left. Terminals: Standard Cone Terminals. The Diameter Of The Positive Terminal Is 19.5 Mm, The Negative Terminal Is 17.9 Mm. Mounting Type: B00 (Without Bottom Side, Top Fixation). Dimensions: Length: 513 Mm (± 5 Mm) Width: 223 Mm (± 5 Mm) Height (With Terminals): 223 Mm (± 5 Mm). Quality Requirements: The Product Is New, Not Used, Without Body Defects, Chips, Cracks And Traces Of Electrolyte. Production Time At The Time Of Delivery: No More Than 6 Months From The Date Of Production. Delivery Condition: Completely Ready For Use, Filled With Electrolyte With A Density Of 1.27 To 1.30 G/Cm³, Charged. Voltage Without Load Is Not Less Than 12.6V. Compliance With Gost 959-2016 (Or St Rk Iec 60095-1). Housing: Impact-Resistant, Frost-Resistant Polypropylene. Availability Of Handles For Carrying. Warranty: At Least 12 Months From The Date Of Acceptance. Set: Battery Assembly - 1 Pc., Protective Terminal Caps - 1 Set, Passport And Warranty Card With Release Date And Qc Mark - 1 Pc., Copy Of Certificate Tr Ts 018/2011., Rechargeable Battery (Ab) 6St-100 (Straight Polarity). Type Of Service: Serviced (Presence Of Threaded Filler Plugs On The Top Cover To Control The Level And Density Of The Electrolyte, As Well As For The Possibility Of Adding Distilled Water). Technical Characteristics: Type: 6St-100 (Or Equivalent). Voltage: 12V. Capacity: 100Ah. Starting Current: Not Less Than 750A (According To En Standard). Polarity: Straight (Designated “1”). The Positive Terminal (+) Should Be Located On The Left When Facing The Battery (Terminals Closest To The Observer). Terminals: Standard Cone Terminals. The Diameter Of The Positive Terminal Is 19.5 Mm, The Negative Terminal Is 17.9 Mm. Mounting Type: B00 (Without Bottom Side, Top Fixation). Case Type: Asian Case Type: Length No More Than 306 Mm, Width No More Than 173 Mm, Height No More Than 225 Mm. Quality Requirements: The Product Is New, Not Used, Without Body Defects, Chips, Cracks And Traces Of Electrolyte. Production Time At The Time Of Delivery: No More Than 6 Months From The Date Of Production. Delivery Condition: Completely Ready For Use, Filled With Electrolyte With A Density Of 1.27 To 1.30 G/Cm³, Charged. Voltage Without Load Is Not Less Than 12.6V. Compliance With Gost 959-2016 (Or St Rk Iec 60095-1). Housing: Impact-Resistant, Frost-Resistant Polypropylene. Availability Of Handles For Carrying. Warranty: At Least 12 Months From The Date Of Acceptance. Set: Battery Assembly - 1 Pc., Protective Terminal Caps - 1 Set, Passport And Warranty Card With Release Date And Qc Mark - 1 Pc., Copy Of Certificate Tr Ts 018/2011., Yellow Reflective Tape For Contour Marking Of Cars 55Mmx50m. Main Characteristics: Standard Size: Width - 50 Mm, Roll Length - 50 M. Type Of Material: Polyester (Or Pvc) With A Reflective Layer Applied. Technology: Microprismatic (Provides High Visibility From Different Angles) Or Glass Microspheres. Color: Yellow. Physical And Mechanical Properties: Base: Self-Adhesive (With A Protective Backing). Type Of Glue: Aggressive Acrylic Glue (Pressure Sensitive). Retroreflection Coefficient: Not Less Than 300–450 Cd/(Lx M²). Tape Thickness: 0.15 – 0.35 Mm (Excluding Substrate). Operating Parameters: Temperature Range: From -30°C To +60°C. Resistance: High Resistance To Abrasion, Moisture, Uv Rays And Road Reagents. Adhesion: Excellent Adhesion To Metal, Plastic And Painted Surfaces. Service Life: At Least 3–5 Years For External Use. Purpose: Contour Marking Of Vehicles (Trucks, Trailers). Designation Of Dimensions In Warehouses, Parking Lots, Dangerous Areas In The Urban Environment. Application To Elements Of Workwear Or Road Equipment. Compliance With Gost R 41.104 Standards (Or Tr Ts 018/2011 For Transport) In Terms Of Lighting Characteristics. 6 Month Warranty.
|
