|
Five-Fingered Winter Gloves-Gaitersbrief Description:Insulated Five-Fingered Gloves Made Of Natural Split Leather, Designed To Protect Hands During Welding, Plumbing And Installation Work In Winter. They Have An Insulated Inner Lining, An Extended Cuff, A Reinforced Palm And Durable Seams. Protect From Mechanical Influences, Sparks, Splashes Of Molten Metal And Cold., A Welding Mask Is A Means Of Individual Protection Of The Welder’S Face And Eyes From Ultraviolet And Infrared Radiation, Sparks, Splashes Of Molten Metal And Mechanical Influences., Gas Cutter Goggles Are A Means Of Personal Protection For The Eyes And Face When Gas Cutting, Welding And Other Work With An Open Flame. Designed To Protect Against Sparks, Splashes Of Molten Metal, Dust, Heat And Light Radiation., Safety Glasses Are Personal Eye Protection Designed To Protect Against Mechanical Particles, Dust, Splashes And Other Industrial Impacts. Glasses Must Have Transparent, Impact-Resistant Lenses, Comfortable Frames And Secure Fit On The Face., Designed To Protect The Employees Hearing Organs From Exposure To Increased Levels Of Industrial Noise During Construction, Repair, Production And Other Work., Form: Waybill For Truck And Car According To The Sample, Made From Natural Hemp Fiber, Twisted, Durable, Designed For Household, Installation, Loading And Unloading And Auxiliary Work. Diameter - 20 Mm. The Surface Is Without Tears, Knots Or Significant Damage. New, Never Used., Mens High, Insulated Marsh Boots High Waterproof Boots To Protect Feet From Water, Moisture, Dirt, Cold And Mechanical Stress When Working In Marshy And Damp Areas. The Height Of The Boots Is Increased, To The Top Of The Legs. The Material Is Waterproof, Insulated. The Sole Is Durable, Textured, Anti-Slip. Dimensions - According To The Customers Request. New, Never Used., Line For Sealing - 1 Coil Strong Transparent Line For Installing And Fixing Control Seals. Material: Nylon/Polyamide, Resistant To Stretching, Abrasion And Moisture. Diameter - Approximately 0.5–0.8 Mm. Delivery In A Coil, Length 1000, Foil-Coated Mineral Wool For Insulation Of Pipes Ø150 Mm, Thickness 10 Mm Thermal Insulating Material Based On Mineral Fiber, Covered With Aluminum Foil On One Side. The Thickness Of The Thermal Insulation Layer Is 10 Mm, Designed To Insulate Pipelines With A Diameter Of 150 Mm, Reduce Heat Loss And Protect Pipes From Low Temperatures. The Material Is Non-Flammable, Moisture-Resistant, Resistant To Elevated Temperatures. Delivery In Rolls. Roll 1 × 10 M (10 M²), Plastic Seal Sample To Be Agreed Upon By The Customer, Civilian Gas Mask Gp-7 Designed To Protect The Respiratory System, Eyes And Face From Exposure To Dust, Aerosols And Certain Hazardous Chemicals When Using An Appropriate Filter Box. Set: Front Part, Filter-Absorbing Box, Storage Bag, Components According To The Factory Configuration. The Front Part Should Provide A Tight Fit To The Face. The Product Is New, Unused, With A Passport And Documents Of Conformity., Armstrong Type Led Panel, Size 595X595 Mm, Power 36 W. Designed For Lighting Office, Industrial, Administrative And Domestic Premises. Supply Voltage - 220–240 V, 50 Hz. Luminous Flux - Approximately No Less Than 3,200 Lm. Color Temperature - 4000–6500 K According To The Customer’S Request. The Diffuser Is Matte, The Body Is Metal. Installation - In An Armstrong-Type Suspended Ceiling. Service Life - At Least 30,000 Hours. New, Never Used., Underground Fire Hydrant H=1.5 M Underground, For Water Supply Network, Nominal Bore Dn125, Height 1500 Mm, Working Pressure Up To 1.0 Mpa, Factory-Made, Corresponding To Gost 8220-85 In The Amount Of 4 Pieces Underground Fire Hydrant H=2.0 M Underground, For Water Supply Network, Nominal Bore Dn125, Height 2000 Mm, Working Pressure Up To 1.0 Mpa, Factory-Made, Corresponding To Gost 8220-85 In The Amount Of 5 Pieces
|
