|
Poly-V-Ribbed (Ribbed) Drive Belt For Vehicle Auxiliary Units. Marking / Standard Size 6Pk1220 (6 Strands, Effective Length 1220 Mm). Applicability (Compatibility) For The Standard Drive System Of The Generator And Auxiliary Units Of Cars Of The Uaz Family (With Engines Zmz-409/4091 Without Power Steering), Gaz (Engine Zmz-406) And Similar Technology.Material And Constructionmade Of High Quality Synthetic Rubber (Epdm Or Equivalent), Reinforced With High-Strength Polyester Cord For Resistance To Stretching And Wear. Ozone-, Oil- And Heat-Resistant. Operating Temperature Operation In The Range From -40 ° C To +80 ° C In The Engine Compartment. Product Condition New, Unused, Without Cracks, Rubber Delaminations And Cord Casting Defects. Year Of Manufacture: No Earlier Than 2025–2026. Compatibility Approval Requirement. After Signing The Contract And Before The Actual Delivery Of The Goods, The Supplier Is Obliged To Contact The Customer To Clarify The Exact Profile Of The Belt (Ribbed 6Rk Or V-Type B/V), Its Applicability On The Customer’S Specific Vehicle, And Also Obtain Written Or Electronic Approval From The Customer. In The Event Of Delivery Of An Incompatible Product, The Supplier Undertakes To Replace It At Its Own Expense., Product: Cardan Shaft Cross Assembly With Bearings And Retaining Rings. Applicability (Compatibility) For Driveshafts (Front And Rear Axles) Of Cars Of The Uaz-3909 (“Farmer”), Uaz-452, Uaz-3303, Uaz-3151 Family And Their Modifications. Technical Parameters Pin (Trunnion) / Bearing Diameter: 30 Mm. Type Of Fixation In The Cardan Fork: Retaining Rings (Internal Or External Locking Depending On The Modification Of The Shaft). Design Features Mandatory Presence Of A Built-In Press Valve (Grease Fitting/Grease Fitting) In The Cross Body For Regular Maintenance And Injection With Grease. Equipment Each Unit Of Goods Must Be Supplied In Individual Factory Packaging And Be Fully Equipped: 1) Crosspiece - 4 Pcs. 2) Needle Bearings (Cups) With Lip Seals - 4 Pcs. 3) Retaining Rings - 4 Pcs. 4) Grease Nipple - 1 Pc. Item Condition New, Not Used. Needle Bearings Must Be Pre-Filled With Factory Preservative Or Working Lubricant. Year Of Manufacture: No Earlier Than 2025–2026 Requirement For Approval Of Compatibility The Supplier, After Signing The Contract And Before The Actual Delivery Of The Goods, Is Obliged To Contact The Customer To Clarify The Exact Type Of Locking Of The Cups (Internal Retaining Rings Or External) On The Customer’S Cardan Shafts, And Also To Obtain Written Or Electronic Approval From The Customer For The Supplied Goods. In The Event Of Delivery Of An Incompatible Product, The Supplier Undertakes To Replace It At Its Own Expense., Front Axle Driveshaft Assembly (With Crosspieces And Splined Part). Applicability (Compatibility) For Vehicles Of The Uaz-3909 (“Farmer”), Uaz-452 (“Loaf”), Uaz-3303 Family And Their Modifications With Leaf Spring Or Spring Front Suspension. Design Features Thin-Walled Steel Tubular Structure, Dynamically Balanced At The Manufacturer. Equipped With A Protective Casing Of The Spline Connection To Prevent The Ingress Of Dirt And Moisture. Technical Characteristics The Driveshaft Crosspieces Must Be Equipped With Grease Fittings (Grease Fittings) For Regular Maintenance (Lubrication). Dimensional Characteristics Shaft Length In A Fully Compressed State (At The Centers Of The Crosspieces): From 530 Mm To 570 Mm (Equivalent To Factory Standards For 4 Or 5-Speed Gearbox).Item Condition: New, Not Used, Not Refurbished. The Spline Connection And Crosspieces Should Have No Backlash. Availability Of Factory Balancing (Balancing Weights). Year Of Manufacture: No Earlier Than 2025–2026. Compatibility Approval Requirement. The Supplier, After Signing The Contract And Before The Actual Delivery Of The Goods, Is Obliged To Contact The Customer To Accurately Measure The Length Of The Customer’S Old Driveshaft In A Compressed And Extended State, Clarify The Type Of Installed Gearbox (4 Or 5-Speed), The Type Of Axles (Timken/Spicer), And Also Receive A Written Or Electronic Letter From The Customer. Agreement On The Supplied Goods. In The Event Of Delivery Of Goods Of Incompatible Length, The Supplier Undertakes To Replace Them At Its Own Expense., Automotive Suspension Shock Absorber (Front/Rear). Applicability (Compatibility) For Standard Spring Suspension Of Cars Of The Uaz-3909 (Farmer), Uaz-452, Uaz-3303, Uaz-3741 Family And Modifications. Type Of Construction: Oil, Hydraulic, Two-Pipe. Type Of Fastening Upper And Lower Fastening - Ring/Ring (Type: “Ear-Ear”) For The Installation Of Rubber/Polyurethane Bushings. Dimensional Characteristics Length In A Compressed State: No Less Than 350 Mm, Length In An Extended State: No Less Than 550 Mm (Deviation From The Standard Dimensions Is Allowed No More Than ± 5 Mm). Condition Of The Goods New, Not Used. The Housing Must Have No Traces Of Leakage Of Working Fluid Or Mechanical Damage. Supplied Complete With Mounting Sleeves. Year Of Manufacture: No Earlier Than 2025–2026. Requirement For Approval Of Compatibility. The Supplier, After Signing The Contract And Before The Actual Delivery Of The Goods, Is Obliged To Contact The Customer To Clarify The Exact Modification Of The Vehicle, The Type Of Springs (Small-Leaf Or Multi-Leaf) And The Compliance (Compatibility) Of The Technical Parameters Of Shock Absorbers, And Also To Obtain Written Or Electronic Approval From The Customer For The Supplied Goods. In The Event Of Delivery Of An Incompatible Product, The Supplier Undertakes To Replace It At Its Own Expense., Set Of Rear Suspension Bars (Thrust Rods). Applicability (Compatibility) For The Standard Rear Suspension Of Cars Of The Lada Niva (Vaz-2121, 21213, 21214, Urban, Legend) And Chevrolet Niva / Travel (Vaz-2123) Family. Set Contents (5 Pieces) Complete Set For The Car, Including: 1) Long Longitudinal Bar (Lower) - 2 Pcs. 2) Short Longitudinal Bar (Upper) - 2 Pcs. 3) Transverse Bar (Panhard Rod) - 1 Pc. Design Features Made From High-Strength Steel Pipe Of Round Section. Supplied Assembled With Installed (Pressed) Rubber-Metal Hinges (Silent Blocks). Coating: Anti-Corrosion Powder Painting. Product Condition: New, Not Used. Silent Blocks Should Not Have Cracks Or Separation Of Rubber From Metal. Year Of Manufacture: No Earlier Than 2025–2026. Compatibility Approval Requirement. After Signing The Contract And Before The Actual Delivery Of The Goods, The Supplier Is Obliged To Contact The Customer To Clarify The Exact Modification Of The Rear Axle, The Year Of Manufacture Of The Vehicle And The Compliance Of The Rod Parameters (The Old Vaz-2121 Model Or The New Reinforced Vaz-2110/2123 Model With Spherical Silent Blocks), And Also Receive A Written Or Electronic Letter From The Customer. Agreement. In The Event Of Delivery Of An Incompatible Product, The Supplier Undertakes To Replace It At Its Own Expense., Engine Camshaft (Camshaft) Assembled With Housing (Bed). Applicability (Compatibility) For Standard 8-Valve Engines Of The Lada Niva Family (Vaz-21213, 21214, Urban, Legend) And Chevrolet Niva / Travel (Vaz-2123). Equipment Supplied Complete With Camshaft Bearing Housing (Bed). Design Features Full Compliance With Factory Specifications Standards, The Material Of Manufacture Is High-Strength Cast Iron Or Steel With Heat Treatment (Hardening) Of The Working Surfaces Of The Cams And Bearing Journals. Product Condition New, Unused, In The Original Factory Packaging. Working Surfaces Should Not Have Burrs, Holes Or Casting Defects. Year Of Manufacture: No Earlier Than 2025–2026. Compatibility Approval Requirement. After Signing The Contract And Before The Actual Delivery Of The Goods, The Supplier Is Obliged To Contact The Customer To Clarify The Type Of Engine (Carburetor/Injector), The Availability Of Hydraulic Compensators (Old Or New Cylinder Head Model), And Also Obtain Written Or Electronic Approval From The Customer For The Supplied Goods. In The Event Of Delivery Of An Incompatible Product, The Supplier Undertakes To Replace It At Its Own Expense., Steering Mechanism Of A Passenger Car (Steering Gearbox). Applicability (Compatibility) For The Standard Steering System Of Cars Of The Lada Niva Family (Vaz-2121, 21213, 21214, Urban, Legend). Design Features Worm Type, Assembled With A Bipod. [Select The One You Need: With Power Steering (For Models With Power Steering, Short/Long Shaft) / Without Power Steering (For Older Modifications Without Power Steering)]. Item Condition New, Not Used. The Housing Must Not Have Cracks, Chips Or Signs Of Oil Leakage. Year Of Manufacture: No Earlier Than 2025–2026. Compatibility Approval Requirement. After Signing The Contract And Before The Actual Delivery Of The Goods, The Supplier Is Obliged To Contact The Customer To Clarify The Exact Modification, Year Of Manufacture Of The Vehicle, Availability Of Power Steering And The Length Of The Steering Gear Shaft (Long Or Short Shaft), And Also Obtain Written Approval From The Customer For The Supplied Goods. In The Event Of Delivery Of An Incompatible Product, The Supplier Undertakes To Replace It At Its Own Expense., Ball Support For The Front Suspension (Set). Applicability (Compatibility) For The Standard Front Suspension Of Cars Of The Lada Niva Family (Vaz-2121, 21213, 21214, Urban, Legend) And Chevrolet Niva / Travel (Vaz-2123). Design Features Reinforced Design, Solid Forged Or Stamped-Welded Body, With Increased Force Of Pulling The Pin Out Of The Body. Designed For Use Under Heavy Loads And Off-Road Conditions. Equipment Each Ball Joint Must Be Supplied In Individual Or Group Original Packaging And Be Fully Equipped With A Protective Rubber Cover (Boot), Fasteners (Bolts, Nuts, Washers) And A Locking Ring. Product Condition New, Unused, Without Traces Of Corrosion Or Mechanical Damage. Year Of Release: No Earlier Than 2025–2026., Automotive Shock Absorber (Suspension Element). Applicability (Compatibility) For The Standard Suspension Of Cars Of The Lada Niva Family (Vaz-2121, 21213, 21214, Urban, Legend) And Chevrolet Niva / Travel (Vaz-2123). Design Type [To Be Specified With The Customer: Oil / Gas-Oil], Two-Pipe, Hydraulic. Equipment And Quantity Complete Set For The Car In The Amount Of 4 Pieces, Of Which: 1) Front Shock Absorber - 2 Pieces. 2) Rear Shock Absorber - 2 Pieces. Item Condition New, Not Used, Complete With Protective Covers And Mounting Bushings (If The Design Is Provided By The Factory). Year Of Manufacture: Not Earlier Than The Current Or Previous Calendar Year. Compatibility Approval Requirement The Supplier, After Signing The Contract And Before The Actual Delivery Of The Goods, Is Obliged To Contact The Customer To Clarify The Exact Modification, Year Of Manufacture Of The Vehicle And The Compliance (Compatibility) Of The Technical Parameters Of Shock Absorbers, As Well As Obtain Approval From The Customer For The Supplied Goods. In The Event Of Delivery Of An Incompatible Product, The Supplier Undertakes To Replace It At Its Own Expense., Automotive Generator (Ac, High Power). Applicability (Compatibility) For Chevrolet Niva / Lada Niva Travel (Vaz-2123), As Well As For Lada Niva Legend/Urban Modifications Equipped With An Air Conditioning System. Rated Voltage Not Less Than 14 V. Maximum Output Current Not Less Than 110 A (Or Equivalent 115 A - 140 A To Ensure Stable Operation Of The Air Conditioner And Electrical Systems).Pulley Type (Drive Belt) Poly-V-Ribbed (For A Ridge Belt).Design Featuresbottom/Side Mounting, Full Compliance With The Factory Seats Of The Vaz-2123 Internal Combustion Engine., Poly-V-Ribbed (Ribbed) Drive Belt For Vehicle Attachments. Marking / Standard Size 6Pk1195 (6 Strands, Effective Length 1195 Mm). Applicability (Compatibility) For The Standard Power Steering (Power Steering) Drive System Of Cars Of The Uaz-3909 (“Farmer”), Uaz-452 (“Loaf”), Uaz Hunter Family And Their Modifications With Zmz-409/4091 Engines With Power Steering (Manufactured Since 2008). Material And Design Made From High-Quality Wear-Resistant Synthetic Rubber (Epdm / Chloroprene Rubber), Tear-Resistant. Reinforced With Polyester Cord To Prevent Sagging And Stretching. Oil-, Heat- And Ozone-Resistant. Product Condition: New, Unused, Without Cracks, Peeling Or Burrs Of The Rubber Compound. Year Of Manufacture: No Earlier Than 2025–2026. Compatibility Approval Requirement. After Signing The Contract And Before The Actual Delivery Of The Goods, The Supplier Is Obliged To Contact The Customer To Clarify The Exact Modification Of The Engine, The Type Of Installed Power Steering Pump And Attachments, And Also To Obtain Written Or Electronic Approval From The Customer For The Supplied Goods. In The Event Of Delivery Of An Incompatible Product, The Supplier Undertakes To Replace It At Its Own Expense., Fire Extinguisher For Car, The Wheel Hub For The Diesel Gaz-3309 Is A Unit That Ensures Wheel Rotation And Fastening Of The Brake Drum. On Gaz-3309 (Diesel) Cars. The Front Wheel Hub Assembly (Right) For Gaz-3309 Is A Unit That Combines The Hub, Brake Drum, Bearings And Often An Abs Ring. Main Article: 3309-3103006. Weight Is Approx. Kg. Designed For Installation On The Front Axle, It Ensures Wheel Rotation And The Functioning Of The Braking System., Purchases Motor First Aid Kit (Car First Aid Kit 2024 New Composition Gost! You Need To Buy A Car First Aid Kit To Pass A Technical Inspection And To Provide First Aid To Victims Of Road Accidents. Manufactured In Accordance With The Order Of The Ministry Of Health And Social Development Of The Russian Federation Of 2020, No. 1080N, Certefied. For Your Convenience, A Special Case Has Been Developed, Different From Similar In Their Compact Dimensions And Durable Material, For Convenient And Safe Storage In The Car. Composition: - Mask: 2 Pcs. - Medical Gloves: 2 Pairs (Rubber) - Device For Artificial Respiration: 1 Pc. - Hemostatic Tourniquet: 1 Pc. - Gauze Bandage: 4 Pcs. - Gauze Bandage With A Size Of At Least 7 M: 3 Pcs. - Gauze Napkins: 2 Packs - Adhesive Plaster: 10 Pcs - Scissors: 1 Pcs - First Aid Instructions: 1 Pcs - Certificate Date Of Production Of The Last Batch: 01/01/2024 The First Aid Kit Is Intended For First Aid! Having A First Aid Kit In The Car Is Mandatory By Law.) A “Certificate Of Conformity” Is Required., To Visualize The Emergency Condition Of The Car
|
