|
Bids Are invited for Custom Bid For Services - Day To Day Electrical Nature Of Works At Dhoptala Ocm Of Sasti Sub Area Ballarpur Area - Making Cement Concrete Foundation Including Excavation (60 X 60)Cm X Deep 1/6 Of Pole Length In 1:3:6 Cement Concrete 20 X 25 Mm Stone Metal, 45Cm X 45Cm X 45Cm/ 45Cm Dia. X 45Cm Height Plinth Duly Plastered, With Necessary Curing And Finishing Complete. (For Above 9M Poles) , Supplying & Erecting Rolled Steel Joist (Girder) Pole 100 X 116 Mm (23 Kg/M) With Provided Base Plate In Provided Foundation As Per Specification No. Oh-Pl/Rsj , Erecting Rolled Steel Joist (Girder) Pole 100 X 116 Mm (23 Kg/M) With Provided Base Plate In Provided Foundation As Per Specification No. Oh-Pl/Rsj , Supplying & Erecting Ms Pole Bracket For Guarding/Lt Oh Line, Fabricated From Angle Iron 50X50x6mm And 1100Mm Long For Necessary Nos. Of Provided Insulators, And Erecting On Pole With 50X6mm Cl Complete As Per Specification No. Oh-Pl/Bkt , Supplying And Erecting Porcelain Shackle Type Lt Medium Insulator75x115mm Dia. With G.L. (Shackle) Strips, Nuts And Bolts, Complete. , Making Cement Concrete Foundation Including Excavation (60 X 60 X 150)Cm Deep In 1:3:6 Cement Concrete, (20 To 25) Mm Stone Metal With Necessary Curing And Finishing Complete.(For Stay). , Erecting Acsr Conductor Of Size - 6/1-4.72 Mm (Dog) Complete. (394 Kg/Km) As Per Specification No. Oh-Con/Acsr , Supplying And Erecting G.I. Stay Set For Poles, Including Loop Insulators At An Accessible Height With Anchor Plate 300X300x6mm., Straining Screws, G.L. Stay Wire 7/10 Swg,G.L. Stay Rod 20Mmx1.8M Length And Pole Cl S Duly Erected In Provided Cement Concrete Foundation Complete. , Supplying And Erecting Acsr Conductor Of Size 6/1-2.59 Mm Complete. (Weasel) (127.7 Kg/Km) As Per Specification No. Oh-Con/Acsr , Dismantling The Existing Pole Up To 6 M Height With Brackets, Cl S, Insulators, Stay From The C.C. Foundation And Making The Site Clear By Refilling The Pits With Excavated Materials And Bringing It To The Ground Level. , Dismantling The Existing Pole Above 6 M Height With Brackets, Cl S, Insulators, Stay From The C.C. Foundation And Making The Site Clear By Refilling The Pits With Excavated Materials And Bringing It To The Ground Level. , Dismantling The Existing Overhead Line Including G.I. Wires Of All Sizes Without Damaging & Making The Coils In Suitable Sizes. , Supplying And Erecting Hard Drawn G.I. Wire 8 Swg Complete Erected For Overhead Line With Proper Size Of G.I. Wire For Binding With Jumpering Etc. , Supplying, Installing And Testing Earthing With Galvanised Iron Earth Plate Size 60 X 60 X 0.6 Cm Complete With All Accessories Of Gi Materials & Recording The Results As Per Specification No. Ea-Ep , Supplying And Erecting Triple Pole Metal Clad Switch And Fuse 415V, 100A On Angle Iron / Gi Frame As Per Specification No. Sw-Swr/Mtp. , Supplying And Erecting Double Pole Metal Clad Switch With Hc Type Fuse 240V,63A On Iron / Gi Frame As Per Specification No. Sw-Swr/Mdp. , Supplying And Erecting Hard Drawn G.I. Wire 8 Swg Complete Erected For Overhead Line With Proper Size Of G.I. Wire For Binding With Jumpering & Guarding Etc , Erecting Guarding Loop Using G.L. Wire No. 8 Swg For L.T. Over Head Line Of Horizontal Formation Complete Erected With 20 Swg G.L. Wire As Binding Wire And 50 Mm. Section On Each Side, Complete. , Supplying And Erecting Pole Cl Made From50x6mm Ms Flat For Pole Or Pipe,Post Erected With 15Mm Bolts And Nuts Duly Painted With One Coatof Red Oxide And Two Coats Of Aluminium Paint Complete , Loading And Unloading Of Pvc Cable Of 50/70/95 Sq. Mm, 3.3 Kv Grade From Store To Field, Field To Store And Inside Mine( In 8 Hours - 200 M) , Shifting Of Pvc Cable Of 120/150 Sq. Mm, 11 Kv Grade ( In 8 Hours - 200 M) , Shifting Of 2 Core 2.5/4/6/8 Sq. Mm Lighting Pvc Armored Cable Including Loading,Unloading And Transportation To The Site By Departmental Truck With On Site Arranging For Connectin With Proper Support( In 8 Hours – 250M) , Shifting Of Ms Fabricated Lighting Tower Including Disconnection,Dismanteling Of The Light Fitting And Controls From The Tower To The Required Site With Pit Digging,Recting The Tower,Fixing The Light Fitting And Rearranging The Connection ( In 8 Hours - 2 Tower ) , Transportation Including Loading/ Unloading (With Departmental Truck) Of Ms Angle / Rs Joist / Pipe Pole / Ms Rail / Ms Channel / Tor Steel, Etc ( In 8 Hours - 1600 Kg) , Manual Transportation/ Re Handling Of Lighting Fixtures Including Dismantling And Remounting From/ On Lighting Pole Or Tower. , Dismantling Of Power Transformer,Oil Circuit Breaker, Ht 3.3 Kv Starter Etc Loading, Unloading And Transportation With Departmental Truck & Crane
|
