Tenders Are Invited For Delivery Of A Brand New Agricultural Tractor For Miejskie Zakład Komunalny Sp. Z O. ... in Poland

Work Detail

The Subject Of The Order Is The Delivery Of A Brand New Agricultural Tractor, Intended For Agricultural And Transport Work And For Cooperation With Agricultural Devices And Machines. The Tractor Must Meet At Least The Following Requirements: 1. Engine1) Diesel Engine, 4-Cylinder;2) Minimum 4 Valves Per Cylinder;3) Displacement: Minimum 3500 Cm³;4) High-Pressure Fuel Injection System;5) Turbocharging With Charge Air Cooling;6) Rated Power: Minimum 100 Hp (Approx. 74 Kw);7) Maximum Torque: Minimum 430 Nm;8) Maximum Torque Achieved At A Rotational Speed Of No More Than 1,400 Rpm;9) Exhaust Emission Standard: Minimum Stage V;10) Exhaust Gas Treatment System Ensuring Compliance With The Required Emission Standard;11) Fuel Tank With A Capacity Of At Least 105 Liters;12) Tank Of The Operating Fluid Used In The Exhaust Gas Treatment System - Minimum 10 Liters, If The Solution Used Requires It;13) System Enabling Setting And Maintaining The Set Engine Speed;14) Viscous Fan;2. Electrical Installation1) Alternator With A Capacity Of At Least 120 A;2) Battery With A Capacity Of At Least 140 Ah;3) Battery Disconnection System;4) Electrical Installation Adapted To Work With Agricultural Machines And Devices;5) Electrical Socket For Cooperation With Additional Equipment.3. Transmission1) Reversing Gear With Hydraulic Reverser, 2) Minimum 12 Forward Gears And 12 Reverse Gears, 3) Maximum Speed Of At Least 40 Km/H; 4) A Solution With Additional Creeping Gears Enabling Very Low Driving Speeds Is Allowed.4. Rear Power Take-Off Shaft (Pto)1) Independent Rear Pto;2) Pto Engagement Supported Hydraulically Or Electro-Hydraulically;3) Minimum 3 Pto Speeds: 540/540E/1000 Rpm;4) Possibility Of Independent Engagement And Disengagement Of The Pto.5. Drive And Axles1) 4X4 Four-Wheel Drive;2) Wheelbase Minimum 2300 Mm, Maximum 2400 Mm;3) Turning Radius Maximum 4.50 M;4) Electrohydraulic Engagement Of The Front Axle Drive Or A Functionally Equivalent Solution;5) Rear Axle Differential Lock;6) Front Axle Differential Lock Or Anti-Slip Solution;7) Front Axle Designed To Work With The Front Three-Point Linkage And Front-Mounted Equipment, Including A Plow;6. Hydraulic System1) Hydraulic System Ensuring Correct And Independent Operation Of The Steering System When Powering Hydraulic Receivers Or A Functionally Equivalent Solution;2) Capacity Of The Main Hydraulic Pump - Minimum 60 L/Min;3) Minimum 3 Rear Hydraulic Sections With A Minimum Of 6 Quick Connectors;4) Rear Hydraulic Connections Enabling Operation Of Single- And Double-Acting Receivers;5) Possibility Of Configuring The Functions Of Individual Hydraulic Sections Depending On Applications.7. Rear Linkage1)Rear Three-Point Linkage System Of Category Ii;2)Rear Three-Point Linkage Capacity At A Distance Of 610 Mm Behind The Tips - Range From 3,600 Kg To 3,800 Kg3)Rear Three-Point Linkage Capacity - Range From 4,200 Kg To 4,700 Kg4)Rear Three-Point Linkage Control: Mechanical;5)Hydraulic Lifting System;6)Category Ii Quick Coup

Contact Information