|
Solar Control Mirror Film For Internal Application On Glass Surfaces, Designed To Reduce The Intensity Of Solar Radiation, Prevent Overheating Of Rooms, Protect Against Ultraviolet Radiation And Increase Visual Privacy. Fabric Width - 1.52 M, Roll Length - No Less Than 30 M, Total Thickness - No Less Than 56 Microns (2 Mil), Light Transmission - No More Than 8%, Solar Energy Delay - No Less Than 82%, Degree Of Ultraviolet Radiation Blocking - No Less Than 99%. Operating Temperature Range - From −40 °C To +80 °C. The Film Must Have A Multilayer Structure Based On A Polymer Material With A Metallized Reflective Layer, A Protective Coating Against Mechanical Damage And An Adhesive Layer For Reliable Fixation On The Glass; Construction - At Least 2 Layers. Color - Silver, With A Pronounced Mirror Effect. The Adhesive Layer Must Ensure Uniform Adhesion Of The Material To The Glass Without Peeling, Formation Of Bubbles And Visual Distortions, Subject To The Installation Technology. The Surface Of The Film Must Be Resistant To Moisture, Detergents And Operational Mechanical Stress. The Material Should Reduce The Penetration Of Solar Heat Into The Room, Reduce The Fading Of Interior Decoration And Furniture Under The Influence Of Uv Radiation. The Film Must Be Suitable For Installation On Window Glass And Double-Glazed Windows Without Dismantling The Structures, Supplied In Factory-Made Rolls, Without Folds, Tears, Scratches, Clouding Or Other Manufacturing Defects., Polyester. The Material Is Supplied In Rolls 1.4 Meters Wide And 50 Linear Meters Long. The Roll Winding Must Be Tight, Without Folds, Creases Or Mechanical Damage. The Permissible Deviation In Roll Dimensions Should Not Exceed ±2%. The Material For Covering Medical Couches Should Be A Synthetic Two-Layer Material Based On Polyester (Polyester Fiber) With A Polymer Coating (Pvc Or Polyurethane). The Material Must Have A Smooth, Uniform, Non-Porous Surface Without Defects, Ensuring Moisture Resistance And Resistance To External Influences. The Density Of The Material Should Be At Least 200–350 G/M². The Material Must Be Completely Waterproof, Resistant To Biological Fluids, As Well As Repeated Treatment With Disinfectants, Including Alcohol- And Chlorine-Containing Solutions. The Surface Of The Material Must Be Easy To Clean, Not Absorb Dirt And Not Subject To Cracking, Delamination And Deformation During Operation. The Material Must Have High Tensile Strength, Abrasion Resistance Of At Least 20,000 Cycles, Minimal Shrinkage And Maintain Performance Properties In The Temperature Range From -10°C To +50°C. The Material Should Not Have A Strong Odor And Should Be Safe For Use In Medical Institutions. The Color Of The Material - As Agreed, The Appearance Must Be Uniform Along The Entire Length Of The Roll, Without Defects Or Inhomogeneities.
|
