|
Tender For Various Repairing Works At Judicial Quarter No. J/I/5 Vikramditya Colony, Pratap Nagar, Distt. Udaipur (Raj.)- 1 Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 M Lead With Cement Mortar 1 :4 ( 1 Cement : 4 Coarse Sand) 2 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding: Two Or More Coats On New Work Including Prepartion Of Base With Primer, Putty, Lippy Etc Complete In All Respect. 3 Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete New Plastered Surface (Three Or More Coats) 4 Brick Masonry With F.P.S. Bricks Of Class Designation 75 In Foundation And Plinth With Bricks Cement Mortar 1 : 6 (1 Cement : 6 Coarse Sand) Add Extra For Square Or Rectangular Pillars In Superstructre Brick Work Up To Five Storey Upto 45 Cm Length And All Sides Are Free 5 Repair To Damaged Rcc Slabs, Beams And Columns Etc For Strengthening With Cement Mortar 1 : 2 In Following Steps :- (I) Choping Losse And Cracked Concrete To Required Depth, Cleaning The Exposed Surface Of Steel And Concrete With Wire Brush And Sand Papering , Cleaning Of Concrete Surface With Water As Necessary And Getting Dried. (Ii) Applying Epoxy Primer On The Exposed Steel Bars. (Iii) Applying Epoxy Hardener And Resin Mix (As Per ManufecturedS Specification) On Concrete And Steel Bars With Brush. (Iv) Speading Dry Cement Mortar 1 : 2 Mix Over Epoxy Treated Wet Surface And Allow It To Dry For One Day. (V) Plastering The Surface With Cement Sand Mortar 1 : 3 Upto Depth Of 30Mm Complete. (Vi) Cure The Plastered Surface For 15 Days, All Work Including Scaffolding Etc. Complete In All Respect. 6 Providing And Fixing 1St Quality Standard White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades Glazed Tiles Confirming To Is : 13753 & Is :15622 Of Size 200Mm X 300Mm In Walls, Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Excluding The Cost Of Cement Plaster On Walls And Pillar). 7 Providing And Fixing 1St Quality Mat Finished Ceremic Tile Size 300X300Mm Confirming To Is : 13755 And Is : 15622 Colour Such As White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades In Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Including The Cost Of Cement Mortar Bed 1:4). 8 P & F 1St Quality Vitrified Porcelain Polished Tiles On Floor, Skirting And Steps Etc.In Different Sizes (Thickness To Be Specified By Manufactuer) With Water Absortion Less Than 0.08% And Conforming To Is 15622 Of Approved Make In All Colour And Shade, Laid With 20 Mm Thick Cm 1 : 4 Including Grounting The Joints With White Cement And Matching Pigment Etc Complete. Size 600 Mm X 600 Mm, Thicknes 7.5Mm To 8Mm 9 Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) For Area Of Each Slab From 2001 To 5000 Sq.Cm 10 Providing And Applying Acrylic Emulsion Polymer Waterproofing Chemical Coating, On Over Roof On Over Roof Slabs/Terrace/Balconies/Parapet Wall Etc. With Following Method/Specification:Paint The Surface With Regular Paint Brush So As To Obtain Approximately 0.3Mm Thickness Coating. Apply The 2Nd Coat Next Day At Right Angles To The 1St Coat So That Total Thickness Of The Coating Should Be Approximately 0.6Mm Coverage By Using Above Formulation Will Be 40 Ft2/ Litre Of Chemical. Painted Surface Does Not Require Any External Water Curing Since Chemical Will Hold Sufficient Water For Curing.After The Primer Coat Apply 2 Coats Of Modified Acrylic Emulsion Polymer Water Proofing Compound Having Solar Heat Reduction Properties Coating @ 0.330 Kg/Sqm On The Surface Of The Interval Of 3-4 Hours. Undulation On The Surface Is Repair Before The Waterproofing Work. 11 Providing Gola 75X75 Mm In Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Stone Aggregate 10Mm And Down Gauge) Including Finishing With Cement Mortar 1:3 (1 Cement : 3 Fine Sand) As Per Standard Design : 12 Labour Charges For Repair To Door / Window Without Using Any Material Such As Applying Randha (Finishing) Tightening Of Bolts & Screw Etc. 13 Providing And Fixing Aluminum Work For Doors ,Windows, Ventilators And Partition With Extruded Built Up Standard Tubular / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is :733 And Is :1285, Fixed With Rawl Plugs And Screws Or With Fixing Clips ,Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gap. At Junctions , At Top ,Bottom And Sides With Required Pvc/Neoprene Felt Etc. Aluminium Section Shall Be Smooth ,Rust Free, Straight ,Mitered And Jointed Mechanically Wherever Required Including Cleat Angle Aluminium Snap Beading For Glazing /Paneling , C.P. Brass/ Stainless Steel Screws Al. Tower Bolt & Al. Handle & Al. Aldrop Etc.,All Complete As Per Architectural Drawings And The Directions Of Engineer- In – Charge .(Glazing And Paneling To Be Paid For Separately). For Shutters Builtup Standard Tubular Sections Of Openable Doors ,Windows & Ventilators Including Providing & Fixing Hinges / Rollers Etc. And Making Provision For Fixing Of Fittings Wherever Required (Lockes Shall Be Paid For Separately) Powder Coating Aluminum (Minimum Thickness Of Powder Coating 50 Micron) 14 S&F Fixed Wire Gauge Of Stainless Steel Of 14 Mesh X 24 Gauge To The Aluminium Window By Aluminium Beading 20X3Mm With Suitable Screws Not Exceeding 150Mm Distance At All Heights With All Lead And Lift With Scafolding. 15 Providing And Fixing Glazing In Aluminium Door, Window ,Ventilator Shutters And Partitions Etc. With Pvs / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge.(Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item.) With Glass Panes Of 4.0 Mm Thickness ( Weight Not Less Than 10.0 Kg/Sqm) As Per Is : 2835. 16 Providing And Fixing Granite Stone Slab Mirror Polished And Machine Edge Cut In Walls, Pillars, Steps, Shelves, Sills Counters, Floors Etc. Laid On 12Mm (Av.) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Jointing With White Cement Mortar 1:2 (1White Cement : 2 Marble Dust) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Rajasthan Black. Above 3601 Cm2 Slabs, 15-18Mm Thick. 17 Providing Factory Made 100% Solid Wpc (Wood Polymer Composite) Board Of 18Mm Thicknesss Of Required Size Comprising Of Virign Pvc Resin Of K Value 58-60 ( Suspemsion Grade), Calcium Corbonate And Natural Fibers ( Wood Powders/ Rice Husk/ Wheat Husk) And Non Toxic Additives , Made From Extrusion Process Wpc Foam Sheet Single Extruded ( Inner) With Density Not Less Than 550 Kg/Cbm Manufactured By An Iso 9001 - 2015 Certified Company, Having Good Screw Holding Capacity ( Screw Withrawal Strength Of 1800 N ( Face) & 900 N ( Edge), Minimum Compissive Stength Of 58 N/Mm2, Modulus Of Elasticity 900N/Mm2 And Resistance Of Spread Of Flam Of Class A Caegory Wih Property Of Being Termite/ Borer Free.Water/ Moisture Proof And Fire Retardant And Fixinng Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk Ss Screws. All As Per Direction Of Engineer -In-Charge, Material Test Certificate And Authentication Should Be Compulsory Provided By The Manufacturing Company : For Kitchen Cabinet & Cupboards 18 Providing And Fixing External Grade Board Solid Core Single Leaf Flush Door Shutters Isi 2202-67 Marked Using Phenol Formal Dehyderesin In Glue Both Sides With Approved Steel Fittings Complete As Per Annexure A : 30 Mm Thick . Decorative Teak Veneer Both Side 19 Anti-Termite Treatment Of Existing Floor And Wall Using Imidacloprid 30.5% Ec Non Repellent, Odorless, Low Dose, Environimentally Safe Termiticide With Rapid Action Non Corrosive Stain Free, By Injecting The Emulsion As Per Specification And Plugging With Cement Mortar 1:2 ( 1 Cement : 2 Coarse Sand) In The Whole Floor Area. The Pesticide Emulsion Of Imidacloprid 30.5% Ec Mixed With Water In The Ration Of 1:474 Will Be Pumped By A Motorized Spray Pump Specified Manner. The Net Floor And Wall Area Treated Will Be Measured For Payment. 20 Providing & Fixing Bwr Isi Marked 19 Mm Board Of Approved Make For Making Wardrobe/Shelves And Other Furniture With Fevicol & Nails Complete As Per Approvedby Engineer In Charge. 21 Providing And Fixing Curtain Rods Of 1.25 Mm Thick Chromium Plated Brass Plate, With Two Chromium Plated Brass Brackets Fixed With C.P. Brass Screws And Wooden Plugs, Etc., Wherever Necessary Complete: 12 Mm 22 Extra For Mirror Polishing On Marble Work Where Ever Required To Give High Gloss Finish Complete. 23 Random Rubble Stone Masonry With Hard Stone In Superstructure Above Plinth Level And Upto Five Level Above 30Cm. Thick Walls In : Cement Mortar 1:6 ( 1-Cement : 6-Sand). 24 Providing And Fixing Bamboo Zafari/Fencing Consisting Of Superior Quality 25Mm Dia Solid Bamboo Placed Vertically & Fixed Together With 3 Nos Horizontal Running Members Of Wood In Scantling Of Section Size 50X40Mm And Fixed With Nut And Bolt To Existing Surface/Angle Post As Per Direction Given By Engineer-In-Charge 25 Providing, Hoisting And Fixing Up To Floor Five Level Precast Cement Concrete Jali 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 6Mm Nominal Size) Reinforced With 1.6 Mm Dia Mild Steel Wire Including Centring And Shuttering, Roughening Cleaning, Fixing And Finishing In Cement Mortar 1 : 3 (1 Cement : 3 Fine Sand ) Etc Complete As Per Approved Design Excluding Plastering Of Jambs, Sills And Soffits. 30Mm Thick 26 Providing And Fixing Steel Gate, Grating , And Grills Made Of Angles, Tees, Square Bars, Flats,Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide 27 Spray Painting In Approved Shade And Approved Quality With Duco Paint Of Required Colour To Give Even Shade With Two Or More Coats By Compressor Including Sand Papering, Nc Putty Filler Coat Etc Complete In All Respect As Per Design Given By Engineeer Incharge On New Work. 28 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work 29 P & F White Vitreous China Double Syphonic European W.C. (I.S:2556Mark) With Mounted W.V.C. Flushing Cistern Of (Is : 2556 Mark) Of 10 Litre Capacity Complete With All Necessary Internal Fittings Including Cutting And Making Good The Wall And Floor. 30 P & F Wvc Wash Basin (Ist Quality Is:2556 Mark) Of Approved Make With C.I. Brackets Duly Painted 1 No. 15 Mm C.P. Pillar Cock (Is:8934 Mark) & 32 Mm C.P. Brass Waste Coupling Of Approved Make, P.V.C Waste Pipe With Pvc Nut 32 Mm Complete Including Cutting & Making Good The Wall: Size 450 Mm X 300 Mm 31 P & F 1St Quality Wvc Pedestal For Wash Basin 32 P & F Grating Of Approved Quality/Makesynthetic Material(Ptmt) Of Approved Quality/Make Size Square 150 X 150 X 8Mm. (Anti Cockroach) 33 P & F Water Closet Seat Covers With Brass Hinges Complete : Solid Pvc (Is 2548 Marked) Grade-I White For Ewc. 34 P & F Towel Rail Or Ring Of Approved Quality/Make: C.P. Brass Towel Rail Elbow Type With Concealed Screws Size 450Mm (Heavy Duty). 35 P& F Waste Coulping With Fittings Of Approved Quality /Make: C.P Brass 40 Mm Dia 36 P& F Waste Pipe With All Fitting : P.V.C With C.P Nut 32 Mm 37 P & F Soap Dish Or Tray Of Approved Quality/Make C.P. Brass Heavy And Superior Quality. 38 P & F Looking Mirrors With P.V.C. Frame Of Approved Make As Per Direction Of Engineer-In-Charge Size 500X400Mm 39 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes (Is 15778 : 2007 Code) Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1 Metre Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Internal Work Exposed On Wall) 40 20Mm Nominal Size 41 25 Mm Nominal Size 42 P & F Bib Cock (Is : 8931 Mark), Superior Quality Of Approved Make: C.P. Brass Bib Cock,15Mm Nominal Bore. 43 P & F Stop Cock (Is :8931 Mark), Superior Quality & Of Approved Make: Brass 400 Gm. 15Mm Nominal Bore. 44 P & F Ball Cock (Is :1703 Mark) With Rod & P.V.C. Ball Complete :(-Do-) Wt.Not Less Than 600 Gm, 25Mm. 45 P & F Inlet Connection (Angle Valves) Superior Quality, Of Approved Make, For Wash Basin, Gyser Etc. C.P. Inlet Connection 15Mm.Brass (Is : 8931 Marked) 46 P & F 15 Mm. Dia Connection Pipe Of Approved Quality/Make : Pvc Pipe With C.P. Brass Nuts Upto Length, 450 Mm 47 P & F Pvc Storage Tank (Is : 12701) Marked Indicating The Bis License No.) Of Approved Make With Cover 25 Dia 1 M Long G.I. Over-Flow Pipe & 25 Cm. Long Wash Out Pipe With Plug And Socket Including Making Connections Etc. Complete Of Approved Design. 1000 Liters Capacity 48 P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii/ (4 Kg. /Cm2.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 110 Mm Dia 49 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant:
|