Tender For Repairing Of Wtp-6 At Mandoni And Sindoni Dadra And Nagar Haveli. in India

Work Detail

Tender For Repairing Of Wtp-6 At Mandoni And Sindoni Dadra And Nagar Haveli.- 1 Removing And Scraping Of Old Deteriorated Plaster Of Any Thickness Fromm Wall / R.C.C Member Including Stacking Of Serviceable Material And Disposal Of Unserviceable From Site Of Work With All Lead And Lift. 2 20Mm Thick Sand Faced Cement Plaster On Walls Upto Height 10 Metres Above Ground Level Consisting Of 12Mm Thick Backing Coat Of C.M. 1:3 (1-Cement : 3-Sand) And 8Mm Thick Finishing Coat Of C.M. 1:1 (1-Cement : 1-Sand) Etc. Complete. 3 Providing And Laying Cement Concrete 1:2:4 (1- Cement : 2- Coarse Sand : 4- Graded Stone Aggregates 20 Mm Nominal Size) And Curing Complete Excluding Cost Of Formwork In (A) Foundation And Plinth 4 Brick Work Using Common Burnt Clay Building Bricks Having Crushing Strength Not Less Than 35 Kg./Sq.Cm. In Foundation And Plinth In Cement Mortar 1:6 (1- Cement : 6 -Fine Sand)(B) Conventional 5 Providing Tmt Bar Fe 500D Reinforcement For R.C.C. Work Including Bending, Binding And Placing In Position Complete Upto Floor Two Level 6 Finishing Wall With Weather Proof Exterior Emulsion Paint On Wall Surface (Two Coats) To Give An Required Shape Even Shade After Thoroughly Brushing The Surface To Remove All Dirt, And Remains Of Loose Powdered Materials.Etc Complete. 7 Providing Material And Labour For Laying Water Proofing Over R.C.C. Slab Consisting First Layer Of Special Water Proofing Compound 1 Kg/10 Sq.Mt. Mixed With Cement Slurry Spreaded Over Maked Slab And Second Layer Of Leveling Coarse Of C:M 1:3( 1 Cement :3 Fine Sand ) Of 25Mm (A.V.) Bed Thickness. Third Layer Consisting Of Brick Aggregates Of 75Mm (Av.) Thickness Mix With 50% Cement Mortar 1:3 For Joint Filling And Top Finish Having 10Mm Average Thickness And Exposed Top Smooth Finishing With Cement Slurry Including Making False Chequired 300Mm X 300Mm In Size. The Treatment Is To Be Carried Alongwith The Vertical Surface Of The Parapet And Other Joining Wall Upto Height Of About 200Mm In A Shape Of Quarter Round Vata Including Curing Etc. Complete As Per Specification. Upto Floor Two Level. Water Proofing Compound Having I.S.I Mark Of Iso Make Should Be Used Wherever Cement Used And No Extra Payment Will Be Made For Vata, Curvature Etc. Only Flat Surface Area Will Be Consider For Payment. 8 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing Of Edges To Give High Gloss Finish Etc. Completeat All Levels.Granite Stone Slab Of Colour Black, Cherry/Ruby Red,Area Of Slab Upto 0.50 Sqm. 9 Providing Material And Labour For Fixing Frp Of 28Mm Thick Fibre Glass Shutter With 1.5 To 2.0 Mm Thick Fire Retardent Grade Frp Skin In Depressed Panel Design Having Extra Reinforcement On Sides & Edges & In Gel Coat Finish. The Core Of The Shutter Is To Be Filled Up With Injected Retardent Grade Polyurethane Foam Done In Situ Alongwith Embedded Wooden Pieces For Stiffening & Also Taking Hinges & Fintures. The Whole Frp Frame & Shutter Is To Be Water Proof ,Weather Proof, Termite Proof & Resistance To Mild Acid/Alkali. Rates Are To Be Inclusive Of S.S Hinges With Necessary Screws & Alluminium S.S Fixtures & Fastenings & Fastener Sleeve. 10 Providing And Fixing Window Having Extruded Aluminum Colour Powder Coated Section Frame Main Outer Size 95Mm X 24Mm X 1.17Mm @ Wt.Of 0.738 Kg/Mt, Horizontal Three Track Member Size 92Mm X 31.75Mm X 1.30Mm @ Wt.1.07 Kg/Mt, Vertical Member Of Size 92Mm X 31.75Mm X 1.50Mm ,@ Wt. 1.06 Kg/Mt With Sliding Shutters Of Horizontal Member Size 40 Mmx18Mm X1.29Mm @ Wt.Of 0.456 Kg/Mt, Vertical Member Of Size 40Mm X 18Mm X 1.29 Mm @ Wt.Of 0.456Kg/Mt With 5 Mm Thick Transparent Bronze Colour Tinted Float Glass With Powder Coated Aluminum Fittings And Fixtures And Transparent Silicon Sealant Glass Fixing To Frame As Per Details Etc 11 P & L 24\ X 24\ Vitrified 8 Mm Thick Tile Flooring Over 20 Mm (Average) Base Of Cement Mortar 1:6 ( 1 Cement: 6 Coarse Sand) On New Surface Or Fixing On Existing Flooring By Adhesive Material Including Dismentaling Of Existing Flooring And Jointed With Color Cement Slurry Including Finised With Flush Pointing & Cleaning The Surface Etc. Complete For Light Shade (Make : Johnson, Kajaria, Asian, Rak, Nitco ) 12 Providing Material And Labour For Applying Two Coats With Oil Bound Distemper Of Approved Brand And Manufacture And Of Required Shade On Wall Surfaces To Give An Even Shade, Over And Including A Priming Coat With Distemper Primer Of Approved Brand. (Asian / Ici/Berger Make ) And Manufacture After Thoroughly Brushing The Surface Free From Mortar Dropping And Other Foreign Matter And Also Including Preparing The Surface Even And Sand Papered Smooth.

Contact Information