Tender For Provision Of Certain Sanction Work In The Area Of Age B/R-I And Age E/M Under Ge (Central) Delhi ... in India

Work Detail

Tender For Provision Of Certain Sanction Work In The Area Of Age B/R-I And Age E/M Under Ge (Central) Delhi Cantt-10- 1 M&L, Pcc 1:3:6 Type C-2 Using 40Mm Graded Stone Aggregate As In Foundation, Fitting And Mass Concrete 2 M&L For 15-20Mm Thick Screed Bed Or Bedding Layer Of Cement Mortar 1:6 Complete All As Specified. 3 M&L Supplying And Laying Of Precast U-Shape Strom Water Drains Having In To In Dimension 600Mm X 600Mm Of Top Thickness _50Mm And Bottom Thickness Of _70_Mm Of 2000Mm Long Each From T6 Load Carrying Capacity-4.8Ton Axel Load And 2.4 T Wheel Load Confirming To Bis/Jis Having High Performance Self-Compacting Concrete M-40 Cylindrical Strength / M-50 Grade Cube Strength And Fe500/Fe550D Reinforcement. The Product Should Be Manufactured With Self Compacting Concrete In Wet-Cast Method Only And Dully Steam Cured For Accelerated Curing. The Product Shall Have Tie Shape Joint 10-20Mm With 25Mm Depth Groove As Per Bis/Jis On Both Side Of Each Storm Water Drain For Jointing Two Precast Storm Water Drains Using Cement Mortar Or Suitable Non Shrink Grout. The Precast Utility Duct Must Consists Of Special In-Built Inlet At Appropriate Location For Fixing De-Shackle For Mechanical Installation, Including Supply Transportation, Installation Of Specific Location At Site In Line, Level, Gradient And Plumb With Necessary Testing Commissioning And Filling Cement Slurry B/W Two Segment Joint Etc Complete All As Specified And Directed.2. Contractor Shall Be Enlisted With Mes In Class ‘B’ And Above And Category A(I) Having Mou With Precast/ Prefabricated Manufacturer Who Has Executed Precast/ Prefabricated Building Works With Satisfactory Performance Subject To Satisfactory Remarks With Performance In Respect Of Works In Hand As Reflected In Workload Return (Wlr) Or Any Other Report Circulated By Competent Engineer Authority. The Contractor Should Have Possessed Provident Fund Code Number And Gst Registration Number. Only Mes Enlisted Contractor Is Eligible With Mou. Complete All As Specified And Directed By Eng In Chargenote -1- Including Crane Or Hydra For Laying Drains 2-Sample As Installed/Laid At Sena Bhavan And Displayed Cwe. 3-Once The Precast Drains Are On Site (+,-)5% Of Each Lot Will Be Subjected To Rebound Hammer Test +Compressive Testing 4- Compressive Test Certificate From Original Oem With Inhouse Nabl Accredited Lab Only, To Be Submitted With Each Batch From Authenticity. Mou With Labs And 3Rd Party Lab Test Certificate Will Not Be Accepted. 5. 10 Years Warranty To Be Provided On Drains Against Leakage Or Seepage. 4 Providing And Fixing Factory Made Pre Caste High Strength Precast Draine Covers With Hole, Having Concrete Of Strength Not Less Than M-40, Size 500 X 730 X 80 (Mm), Are Varied As For Site Requirement , Reinforeced With As Per Structural Requirement Tmt Grade Fe 500/550D,All As Specified As Per Direction Of Eng In Charge. 2. Contractor Shall Be Enlisted With Mes In Class ‘B’ And Above And Category A(I) Having Mou With Precast/ Prefabricated Manufacturer Who Has Executed Precast/ Prefabricated Building Works With Satisfactory Performance Subject To Satisfactory Remarks With Performance In Respect Of Works In Hand As Reflected In Workload Return (Wlr) Or Any Other Report Circulated By Competent Engineer Authority. The Contractor Should Have Possessed Provident Fund Code Number And Gst Registration Number. Only Mes Enlisted Contractor Is Eligible With Mou. Complete All As Specified And Directed By Eng In Chargenote -1- Including Crane Or Hydra For Laying Drains 2-Sample As Installed/Laid At Sena Bhavan And Displayed At Hq Cwe Delhi Cantt. 3-Once The Precast Drains Are On Site (+,-)5% Of Each Lot Will Be Subjected To Rebound Hammer Test +Compressive Testing 4- Compressive Test Certificate From Original Oem With Inhouse Nabl Accredited Lab Only, To Be Submitted With Each Batch From Authenticity. Mou With Labs And 3Rd Party Lab Test Certificate Will Not Be Accepted. 5. 10 Years Warranty To Be Provided On Drains Against Leakage Or Seepage. 5 M&L Supplying And Laying Of Precast Box Culvert-Road Crossing Having In To In Dimension 600Mm X 600Mm Of Top Thickness _50Mm And Bottom Thickness Of _70_Mm Of 2000Mm Long Each From T6 Load Carrying Capacity-4.8Ton Axel Load And 2.4 T Wheel Load Confirming To Bis/Jis Having High Performance Self-Compacting Concrete M-40 Cylindrical Strength / M-50 Grade Cube Strength And Fe500/Fe550D Reinforcement. The Product Should Be Manufactured With Self Compacting Concrete In Wet-Cast Method Only And Dully Steam Cured For Accelerated Curing. The Product Shall Have Tie Shape Joint 10-20Mm With 25Mm Depth Groove As Per Bis/Jis On Both Side Of Each Storm Water Drain For Jointing Two Precast Storm Water Drains Using Cement Mortar Or Suitable Non Shrink Grout. The Precast Utility Duct Must Consists Of Special In-Built Inlet At Appropriate Location For Fixing De-Shackle For Mechanical Installation, Including Supply Transportation, Installation Of Specific Location At Site In Line, Level, Gradient And Plumb With Necessary Testing Commissioning And Filling Cement Slurry B/W Two Segment Joint Etc Complete All As Specified And Directed.2. Contractor Shall Be Enlisted With Mes In Class ‘B’ And Above And Category A(I) Having Mou With Precast/ Prefabricated Manufacturer Who Has Executed Precast/ Prefabricated Building Works With Satisfactory Performance Subject To Satisfactory Remarks With Performance In Respect Of Works In Hand As Reflected In Workload Return (Wlr) Or Any Other Report Circulated By Competent Engineer Authority. The Contractor Should Have Possessed Provident Fund Code Number And Gst Registration Number. Only Mes Enlisted Contractor Is Eligible With Mou. Complete All As Specified And Directed By Eng In Chargenote -1- Including Crane Or Hydra For Laying Drains 2-Sample As Installed/Laid At Sena Bhavan And Displayed At Hq Cwe Delhi Cantt. 3-Once The Precast Drains Are On Site (+,-)5% Of Each Lot Will Be Subjected To Rebound Hammer Test +Compressive Testing 4- Compressive Test Certificate From Original Oem With Inhouse Nabl Accredited Lab Only, To Be Submitted With Each Batch From Authenticity. Mou With Labs And 3Rd Party Lab Test Certificate Will Not Be Accepted. 5. 10 Years Warranty To Be Provided On Drains Against Leakage Or Seepage. Please Enable Macros To View Boq Information 6 M&L Supplying And Laying Of Precast Box Culvert-Road Crossing Having In To In Dimension 600Mm X 600Mm Of Top Thickness _50Mm And Bottom Thickness Of _70_Mm Of 2000Mm Long Each From T6 Load Carrying Capacity-4.8Ton Axel Load And 2.4 T Wheel Load Confirming To Bis/Jis Having High Performance Self-Compacting Concrete M-40 Cylindrical Strength / M-50 Grade Cube Strength And Fe500/Fe550D Reinforcement. The Product Should Be Manufactured With Self Compacting Concrete In Wet-Cast Method Only And Dully Steam Cured For Accelerated Curing. The Product Shall Have Tie Shape Joint 10-20Mm With 25Mm Depth Groove As Per Bis/Jis On Both Side Of Each Storm Water Drain For Jointing Two Precast Storm Water Drains Using Cement Mortar Or Suitable Non Shrink Grout. The Precast Utility Duct Must Consists Of Special In-Built Inlet At Appropriate Location For Fixing De-Shackle For Mechanical Installation, Including Supply Transportation, Installation Of Specific Location At Site In Line, Level, Gradient And Plumb With Necessary Testing Commissioning And Filling Cement Slurry B/W Two Segment Joint Etc Complete All As Specified And Directed.2. Contractor Shall Be Enlisted With Mes In Class ‘B’ And Above And Category A(I) Having Mou With Precast/ Prefabricated Manufacturer Who Has Executed Precast/ Prefabricated Building Works With Satisfactory Performance Subject To Satisfactory Remarks With Performance In Respect Of Works In Hand As Reflected In Workload Return (Wlr) Or Any Other Report Circulated By Competent Engineer Authority. The Contractor Should Have Possessed Provident Fund Code Number And Gst Registration Number. Only Mes Enlisted Contractor Is Eligible With Mou. Complete All As Specified And Directed By Eng In Chargenote -1- Including Crane Or Hydra For Laying Drains 2-Sample As Installed/Laid At Sena Bhavan And Displayed At Hq Cwe Delhi Cantt. 3-Once The Precast Drains Are On Site (+,-)5% Of Each Lot Will Be Subjected To Rebound Hammer Test +Compressive Testing 4- Compressive Test Certificate From Original Oem With Inhouse Nabl Accredited Lab Only, To Be Submitted With Each Batch From Authenticity. Mou With Labs And 3Rd Party Lab Test Certificate Will Not Be Accepted. 5. 10 Years Warranty To Be Provided On Drains Against Leakage Or Seepage. Please Enable Macros To View Boq Information

Contact Information