|
Tee Dn 76 Polypropylene Tee Equilateral The Polypropylene Tee Is Intended For Branching Pipelines In Water Supply And Heating Systems Transporting Drinking Or Process Water, In Technological Systems Pipelines Of The Food And Chemical Industry In Residential, Administrative, Industrial Buildings. This Tee Is A Universal Part Polypropylene Pipeline And Can Be Used With Reinforced And Unreinforced Pipes. Mounting Method: Socket, Welded Parts After Heating Elements Are Inserted Into Each Other. Gost 32415-2013, Tee Dn 25 Polypropylene Tee Equilateral The Polypropylene Tee Is Intended For Branching Pipelines In Water Supply And Heating Systems Transporting Drinking Or Process Water, In Technological Systems Pipelines Of The Food And Chemical Industry In Residential, Administrative, Industrial Buildings. This Tee Is A Universal Part Polypropylene Pipeline And Can Be Used With Reinforced And Unreinforced Pipes. Mounting Method: Socket, Welded Parts After Heating Elements Are Inserted Into Each Other. Gost 32415-2013., Tee Dn 40 Polypropylene Tee Equilateral The Polypropylene Tee Is Intended For Branching Pipelines In Water Supply And Heating Systems Transporting Drinking Or Process Water, In Technological Systems Pipelines Of The Food And Chemical Industry In Residential, Administrative, Industrial Buildings. This Tee Is A Universal Part Polypropylene Pipeline And Can Be Used With Reinforced And Unreinforced Pipes. Mounting Method: Socket, Welded Parts After Heating Elements Are Inserted Into Each Other. Gost 32415-2013, Tee Dn 32 Polypropylene Tee Equilateral The Polypropylene Tee Is Intended For Branching Pipelines In Water Supply And Heating Systems Transporting Drinking Or Process Water, In Technological Systems Pipelines Of The Food And Chemical Industry In Residential, Administrative, Industrial Buildings. This Tee Is A Universal Part Polypropylene Pipeline And Can Be Used With Reinforced And Unreinforced Pipes. Mounting Method: Socket, Welded Parts After Heating Elements Are Inserted Into Each Other. Gost 32415-2013, Tee Dn 20. Polypropylene Equilateral Tee Polypropylene Tee Is Intended For Branching Pipelines In Water Supply And Heating Systems Transporting Drinking Or Process Water, In Technological Systems Pipelines Of The Food And Chemical Industry In Residential, Administrative, Industrial Buildings. This Tee Is A Universal Part Polypropylene Pipeline And Can Be Used With Reinforced And Unreinforced Pipes. Mounting Method: Socket, Welded Parts After Heating Elements Are Inserted Into Each Other Gost 32415-2013., Tee Dn 50 Polypropylene Tee Equilateral The Polypropylene Tee Is Intended For Branching Pipelines In Water Supply And Heating Systems Transporting Drinking Or Process Water, In Technological Systems Pipelines Of The Food And Chemical Industry In Residential, Administrative, Industrial Buildings. This Tee Is A Universal Part Polypropylene Pipeline And Can Be Used With Reinforced And Unreinforced Pipes. Mounting Method: Socket, Welded Parts After Heating Elements Are Inserted Into Each Other. Gost 32415-2013, Tee Dn 90 Polypropylene Tee Equilateral The Polypropylene Tee Is Intended For Branching Pipelines In Water Supply And Heating Systems Transporting Drinking Or Process Water, In Technological Systems Pipelines Of The Food And Chemical Industry In Residential, Administrative, Industrial Buildings. This Tee Is A Universal Part Polypropylene Pipeline And Can Be Used With Reinforced And Unreinforced Pipes. Mounting Method: Socket, Welded Parts After Heating Elements Are Inserted Into Each Other. Gost 32415-2013, Pvc Oblique Tee Dn/Od 50/50X45° The Oblique Tee Is Designed For Branching And Changing The Direction Of Pipelines Internal Non-Pressure (Gravity) Sewerage At An Angle Of 45° Degrees. Outer Diameter (Main Passage): 50 Mm. Outer Diameter (Branch): 50 Mm. Wall Thickness: 1.8 Mm (Nominal According To Gost/En For Standard Series Of Internal Systems). Branch Angle: 45° (Oblique). Application Class: For Installation Inside Buildings (Class B, Not Intended For Ground Loads). Operating Temperature: Up To +60°C (Short-Term Up To +95°C). Connection Type: Flare With Rubber Sealing Rings (On The Main Aisle And Branch). Gost 32412-2013, Pvc-U (Pvc-U) Pressure Pipe (Not Plasticized Polyvinyl Chloride) With Adhesive Connection. Dn 50 Pressure Pipe Cormell Pvc D50×2.7 Pn6.3* L=3 M With Socket For Adhesive Connection (Meter) Wall Thickness: Approximately 2.7 Mm. Pipe Length: 3M Length. Type Of Connection: Pressure, Adhesive Or Socket Connection Is Assumed. Scope Of Application: Pressure Feed Systems. Gost 32415-2013, Pvc-U (Pvc-U) Pressure Pipe (Not Plasticized Polyvinyl Chloride) With Adhesive Connection. Dn 63 Cormell Pvc Pressure Pipe D63×2.7 Pn6.3* L=3 M With Socket For Adhesive Joint (Meter) Wall Thickness: Approximately 2.7 Mm. Pipe Length: 3M Length. Type Of Connection: Pressure, Adhesive Or Socket Connection Is Assumed. Scope Of Application: Pressure Feed Systems. Gost 32415-2013, Coupling Dn50 Coupling - Ppr Fitting For Connecting Polypropylene Pipes Using Welding Apparatus. Manufactured In Accordance With Gost 32415-2013 And Can Withstand Pressure Up To 25 Bar. The Coupling Is Used When Installing Water Supply Systems And Heating. Serves For Soldering Pipes Together., Tee Dn 63 Polypropylene Tee Equilateral The Polypropylene Tee Is Intended For Branching Pipelines In Water Supply And Heating Systems Transporting Drinking Or Process Water, In Technological Systems Pipelines Of The Food And Chemical Industry In Residential, Administrative, Industrial Buildings. This Tee Is A Universal Part Polypropylene Pipeline And Can Be Used With Reinforced And Unreinforced Pipes. Mounting Method: Socket, Welded Parts After Heating Elements Are Inserted Into Each Other. Gost 32415-2013
|
